journal article·2010-03

Highly conductive PEDOT/silicate hybrid anode for ITO-free polymer solar cells

Youn Soo Kim, Seok Bin Oh, Jong Hyeok Park, Mi Suk Cho, Youngkwan Lee

Publisher page

Abstract

Abstract In this work, we prepared ITO-free photovoltaic devices ( PVDs) using a transparent poly(3,4-ethylenedioxythiophene):silicate (PEDOT:SiO x ) composite anode equipped with low surface resistance and high transparency. A mixture of poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl C 60 butyric acid methyl ester (PCBM) was used as a photoactive layer. PEDOT:SiO x film was fabricated with an inorganic silicate network via the oxidative polymerization of EDOT and in-situ sol–gel process of TEOS, which should allow enhanced adhesion and bonding strength between the conducting polymers and the glass substrates to be obtained without any significant deterioration of the desired electronic properties of the conducting polymers. The transmittance and surface resistance of the PEDOT:SiO x film were varied in the ranges of 55–94% at 510 nm and 80–380 Ω/sq, respectively. The power conversion efficiency of the ITO-free PVD with PEDOT:SiO x anode was ca 1.2% under an illumination of AM 1.5 G (100 mW/cm 2 ).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
2. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
3. Photoconductivity of a low-bandgap conjugated polymer10.1002/adfm.200600199 ↗
4. Production of large-area polymer solar cells by industrial silk screen printing, lifetime considerations and lamination with polyethyleneterephthalate10.1016/j.solmat.2004.02.031 ↗
5. Indium–tin oxide treatments for single- and double-layer polymeric light-emitting diodes: the relation between the anode physical, chemical, and morphological properties and the device performance10.1063/1.368981 ↗
6. Characterization of treated indium–tin-oxide surfaces used in electroluminescent devices10.1063/1.370948 ↗
7. Electrode grids for ITO-free organic photovoltaic devices10.1002/adma.200602561 ↗
8. , Solution-Processed Metal Nanowire Mesh Transparent Electrodes10.1021/nl073296g ↗
9. Printable anodes for flexible organic solar cell modules10.1016/j.tsf.2003.11.038 ↗
10. All solution roll-to-roll processed polymer solar cells free from indium–tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
11. Biodegradable polymer solar cells10.1016/j.solmat.2008.02.002 ↗
12. ITO-free wrap through organic solar cells—a module concept for cost-efficient reel-to-reel production10.1016/j.solmat.2006.10.005 ↗
13. Roll-to-roll fabrication of mono lithiclarge-area polymer solar cells free from indium–tin-oxide10.1016/j.solmat.2009.04.020 ↗
14. A complete process for production of flexible large area polymer solar cells entirely using screen printing—First public demonstration10.1016/j.solmat.2008.12.001 ↗
15. Reel-to-reel wet coating as an efficient up-scaling technique for the production of bulk-heterojunction polymer solar cells10.1016/j.solmat.2008.12.013 ↗
16. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
17. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
18. Polymer solar cells with poly(3,4-ethylenedioxythiophene) as transparent anode10.1016/j.orgel.2008.07.003 ↗
19. A polymer photodiode using vapour-phase polymerized PEDOT as an anode10.1016/j.solmat.2005.02.005 ↗
20. High-conductivity large-area semi-transparent electrodes for polymer photovoltaics by silk screen printing and vapour-phase deposition10.1016/j.solmat.2005.02.004 ↗
21. Influence of poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonate) in polymer LEDs10.1103/PhysRevB.74.115202 ↗
22. Scientific importance, properties and growing applications of poly(3,4-ethylenedioxythiophene)10.1039/b417803n ↗
23. The preparation of organic/inorganic conducting polymer films using in-situ sol–gel process
24. In-situ formation of gold nanoparticle/conducting polymer nanocomposites10.1080/744819006 ↗
25. Synthesis of new organic–inorganic hybrid glasses10.1021/cm00010a001 ↗
26. Synthesis, characterization, and properties of new polystyrene-SiO2 hybrid sol–gel materials10.1557/JMR.1993.1143 ↗
27. Photochemical synthesis of polyacrylate-silica hybrid sol–gel materials catalyzed by photoacids10.1002/adma.19940060505 ↗
28. The sol–gel process10.1021/cr00099a003 ↗
29. Investigation on polymer anode design for flexible polymer solar cells10.1063/1.2945796 ↗
30. Electroplating of conductive polymers for the metallization of insulators10.1016/0379-6779(94)90076-0 ↗
31. Towards a transparent, highly conductive poly(3,4-ethylenedioxythiophene)10.1002/adfm.200305059 ↗
32. PEDOT–Au nanocomposite films for electrochemical sensing of dopamine and uric acid10.1166/jnn.2007.796 ↗
33. Electrochemical oxidation of poly(3,4-ethylenedioxythiophene)—“in situ” conductivity and spectroscopic investigations10.1016/S0379-6779(99)00271-4 ↗
34. In situ spectroelectrochemical characterization of poly(3,4-ethylenedioxythiophene)10.1016/S0013-4686(98)00405-8 ↗
35. Synthesis and characterization by FTIR spectroscopy of silica aerogels prepared using several Si(OR)4 and R”Si(OR’)3 precursors10.1016/j.molstruc.2008.08.025 ↗
36. Brinker · 1990
37. EPR, optical, infrared and Raman spectral studies of Actinolite mineral10.1016/j.saa.2003.12.021 ↗
38. Socrates · 2001
39. Structural considerations about SiO2 glasses prepared by sol–gel10.1016/0022-3093(86)90112-2 ↗
40. Photocurrent spectroscopy for the investigation of charge carrier generation and transport mechanisms in organic p/n-junction solar cells10.1016/S0927-0248(00)00018-0 ↗
41. Brabec · 2003
42. Efficient tandem polymer solar cells fabricated by all-solution processing10.1002/adfm.200500211 ↗