journal article·2016-08

Plasmonic Ag nanowire network embedded in zinc oxide nanoparticles for inverted organic solar cells electrode

Malika Chalh, Sylvain Vedraine, Bruno Lucas, Bernard Ratier

Publisher page

Abstract

Abstract Transparent Electrodes consisting of silver (Ag) nanowires (NWs) and zinc oxide (ZnO) nanoparticles (NPs) were fabricated by spin-coating. Thus, we demonstrated that by embedding AgNWs into the ZnO NPs, we fabricated a transparent multilayer electrode ZnO NPs/AgNWs/ZnO NPs (ZAZ) with a sheet resistance of 13 Ω/sq and an optical transparency of 88%. The optical properties of the ZAZ structure were investigated and calculated using a FDTD method. The modeling results showed a good agreement with the experimental results. Plasmonic behavior is highlighted. The ZAZ multilayer electrodes were experimentally optimized and were successfully integrated into an inverted organic solar cell based on P3HT:PCBM. A photovoltaic efficiency of 3.53% is obtained on the ITO-free organic solar cells (OSC) and is compared to traditional ITO-based devices with an efficiency of 3.16%. Numerical calculations of the intrinsic absorption of the active layer inside an organic solar cell integrating either ZAZ or ITO are performed. Moreover, we explored numerically, the plasmonic effect created by the AgNWs and how it can influence the absorption inside the active layer of solar cells, in order to take advantage of its electromagnetic field increases. We demonstrate that ZAZ electrodes are a promising alternative to conventional ITO films for high performance inverted OSCs due to better transmission and beneficial plasmonic effect.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Nanomaterials and Printing Technologies · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Correlation between the Indium Tin Oxide morphology and the performances of polymer light-emitting diodes10.1016/j.tsf.2005.03.022 ↗
2. Toward indium-free optoelectronic devices: dielectric/metal/dielectric alternative transparent conductive electrode in organic photovoltaic cells10.1002/pssa.201228089 ↗
3. Highly conductive interwoven carbon nanotube and silver nanowire transparent electrodes10.1088/1468-6996/14/3/035004 ↗
4. Carbon nanotubes and organic solar cells10.1039/C1EE02276H ↗
5. Selective electron-or hole-transport enhancement in bulk-heterojunction organic solar cells with n-or b-doped carbon nanotubes10.1002/adma.201003296 ↗
6. The application of highly doped single-layer graphene as the top electrodes of semitransparent organic solar cells10.1021/nn204675r ↗
7. Organic solar cells with graphene electrodes and vapor printed poly (3, 4-ethylenedioxythiophene) as the hole transporting layers10.1021/nn301901v ↗
8. Layer-by-layer graphene/TCNQ stacked films as conducting anodes for organic solar cells10.1021/nn301721q ↗
9. Evolution of nanomorphology and anisotropic conductivity in solvent-modified PEDOT: PSS films for polymeric anodes of polymer solar cells10.1039/b915756e ↗
10. Solution-processed metallic nanowire electrodes as indium tin oxide replacement for thin-film solar cells10.1002/adfm.201100457 ↗
11. Ultrafine gold nanowire networks as plasmonic antennae in organic photovoltaics10.1021/jp2099637 ↗
12. Spraycoating of silver nanoparticle electrodes for inverted polymer solar cells10.1016/j.orgel.2009.02.019 ↗
13. Solution-processed silver nanowires as a transparent conducting electrode for air-stable inverted organic solar cells10.1016/j.tsf.2014.10.098 ↗
14. Brush-painted flexible organic solar cells using highly transparent and flexible Ag nanowire network electrodes10.1016/j.solmat.2013.11.036 ↗
15. Silver nanowire networks as flexible, transparent, conducting films: extremely high DC to optical conductivity ratios10.1021/nn900348c ↗
16. High-volume processed, ITO-free superstrates and substrates for roll-to-roll development of organic electronics10.1002/advs.201400002 ↗
17. Roll-to-roll printed silver nanowire semitransparent electrodes for fully ambient solution-processed tandem polymer solar cells10.1002/adfm.201501887 ↗
18. Comparative investigation of transparent ITO/ag/ITO and ITO/cu/ITO electrodes grown by dual-target dc sputtering for organic photovoltaic10.1149/1.3131362 ↗
19. Fabrication and characterization of WO3/Ag/WO3 multilayer transparent anode with solution processed WO3 for polymer light-emitting diodes10.1186/1556-276X-7-253 ↗
20. Effect of the thickness of the MoO3 layers on optical properties of MoO3/Ag/MoO3 multilayer structures10.1063/1.4751334 ↗
21. Semitransparent polymer solar cells using V2O5/Ag/V2O5 as transparent anodes10.1016/j.orgel.2011.03.036 ↗
22. 〈http://informationdisplay.org/IDArchive/2012/January/FrontlineTechnologyWetProcessableTransparent.aspx〉.
23. Optimized ITO-free tri-layer electrode for organic solar cells10.1016/j.orgel.2013.01.030 ↗
24. Ag nanowire-embedded ITO films as a near-infrared transparent and flexible anode for flexible organic solar cells10.1016/j.solmat.2012.12.022 ↗
25. Highly transparent low resistance ZnO/Ag nanowire/ZnO composite electrode for thin film solar cells10.1021/nn305491x ↗
26. E.D. Palik, Handbook of Optical Constants of Solids, vol. 1, Academic Press, US, 1998, Elsevier
27. Optical properties of Al-doped ZnO thin films by ellipsometry10.1016/j.apsusc.2007.09.104 ↗
28. Optical characterization of organic blend films integrating metallic nanoparticles10.1016/j.solmat.2011.11.045 ↗
29. On the absorption and electromagnetic field spectral shifts in plasmonic nanotriangle arrays10.1364/OE.22.013308 ↗
30. Optoelectronic performance optimization for transparent conductive layers based on randomly arranged silver nanorods10.1364/OE.23.006209 ↗
31. Elucidating the localized plasmonic enhancement effects from a single Ag nanowire in organic solar cells10.1021/nn505020e ↗