journal article·2002-06

Phosphorus-doped, silver-based pastes for self-doping ohmic contacts for crystalline silicon solar cells

L.M. Porter, A. Teicher, D.L. Meier

Publisher page

Abstract

Undoped and phosphorus-doped Ag-based pastes were applied as circular contacts to the (1 1 1) surface of dendritic web n-type Si. Current–voltage characteristics of as-deposited contacts and contacts annealed at 780°C for 10 min, 950°C for 5 min, 1000°C for 10 min were measured and compared. Annealing above the Ag–Si eutectic temperature (835°C) yielded Si precipitation within the Ag matrix, resulting in increased current across the metal/semiconductor interface. The contact resistivity was significantly lower for P-doped (<0.04 Ω cm2) than for undoped (1.90 Ω cm2) Ag contacts, both of which were annealed at 1000°C. As supported by secondary ion mass spectrometry analyses, these results are attributed to an enhanced P doping level in the Si substrate after annealing the P-doped contacts. A p–n junction diode was demonstrated by alloying the Ag–P paste with p-type Si at 1000°C. The contact resistance was inferred from diode I–V data to be 0.013 Ω cm2, a value which is comparable to the 0.010 Ω cm2 target value for solar cell contacts.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. J.M. Gee, M.D. Bode, B.L. Silva, Boron-doped back-surface fields using an aluminum-alloy process, Proceedings of the 26th IEEE Photovoltaic Specialists Conference, Anaheim, CA, 1997, pp. 275–278.10.1109/PVSC.1997.654082 ↗
2. Lölgen · Appl. Phys. Lett. · 1994 · 65 · 279210.1063/1.112992 ↗
3. D.L. Meier, H.P. Davis, A. Shibata, T. Abe, K. Kinoshita, C. Bishop, S. Mahajan, A. Rohatgi, P. Doshi, M. Finnegan, Self-doping contacts and associated silicon solar cell structures, Second World Conference and Exhibition on Photovoltaic Solar Energy Conversion, Vienna, Austria, 1998.
4. D.L. Meier, H.P. Davis, R.A. Garcia, J.A. Jessup, A.F. Carroll, Self-doping contacts to silicon using silver coated with a dopant source, Proceedings of the 28th IEEE Photovoltaic Specialists Conference, Anchorage, Alaska, 15–22 September, 2000, pp. 69–74.10.1109/PVSC.2000.915755 ↗
5. T.B. Massalski, H. Okamoto, P.R. Subramanian, L. Kacprzak (Eds.), Binary Alloy Phase Diagrams, Vol. 1, 2nd Edition, ASM International, Materials Park, OH, 1990.
6. Models for ohmic contacts on graded crystalline or amorphous heterojunctions10.1016/0038-1101(82)90054-5 ↗
7. A critical review of ohmic and rectifying contacts for silicon carbide10.1016/0921-5107(95)01276-1 ↗
8. L.M. Porter, T. Jang, T. Worren, K.C. Chang, N.A. Papanicolaou, J.W. Erickson, Effects of surface and interlayer processing conditions on selected ohmic contact metallizations for p-type silicon carbide, in: Silicon Carbine? Materials, Processing and Devices, Mater. Res. Soc. Symp. Proc. Warrendale, PA, 2001, p. H7.1.10.1557/PROC-640-H7.1 ↗
9. Sze · 1981