journal article·2025-10Open access

Development of low-cost, light weight c-Si photovoltaic modules with potential for applications in VIPV

Bartlomiej Fligier, Srinath Nalluri, Bernard Moćko, Kazimierz Drabczyk, Grażyna Kulesza-Matlak, Katarzyna Jajczak, Pradeep Padhamnath

Abstract

Vehicle integrated photovoltaics (VIPV) is gathering attention by researchers and industry alike to help in decarbonization of transport industry. While PV panels have been integrated to the vehicles to support auxiliary functions, their wide scale implementation is limited by their size, weight and rigidity. In this work we present a proof-of-concept method to produce bi-facial PV panels with fibre-glass reinforced composite fabric (GRCF) using vacuum resin infusion process. These modules are specifically designed for integrating with an electric car and to be used as a power source to charge the batteries. Mini modules are fabricated using two interdigitated back contact solar cells sandwiched between layers of GRCF sheets. The modules are prepared by drawing the resin under a suitable vacuum through the different GRCF layers and allowing the resin to cure at room temperature. The modules are prepared at room temperature without using a stringer or laminator. Three different metal end-strips are used to assess their performance in the finally prepared module. The modules are subjected to the damp-heat test to analyse the degradation in the modules and the suitability of the fabrication process. Results show that resistance losses and optical losses play a vital role in the final losses resulting from degradation of the modules. Finally, we have shown in this work that it is possible to fabricate such modules using low-cost technology. By fine tuning and scaling-up the process, it is possible to produce modules of any size which could further help in the rapid integration of c-Si PV modules in vehicles.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: solar cell performance optimization · Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Requirements for future automotive batteries–a snapshot10.1016/j.jpowsour.2004.11.007 ↗
2. The challenge to fulfill electrical power requirements of advanced vehicles10.1016/j.jpowsour.2003.09.002 ↗
3. Integration of PV systems on health emergency vehicles. The FIVE project10.1002/pip.558 ↗
4. A city bus electrification supported by the photovoltaic power modules10.4271/2014-01-2898 ↗
5. Solar potential on commercial trucks: results of an irradiance measurement campaign on 6 trucks in Europe and USA
6. Energy forecast for mobile photovoltaic systems with focus on trucks for cooling applications10.1002/pip.2886 ↗
7. Potential and challenges of vehicle integrated photovoltaics for passenger cars
8. Yield potential of vehicle integrated photovoltaics on commercial trucks and vans
9. Urban solar potential for vehicle integrated photovoltaics
10. Development and testing of light-weight PV modules based on glass-fibre reinforcement10.1051/epjpv/2022007 ↗
11. Development and thermo-mechanical reliability assessment of fiber reinforced polymers in lightweight PV modules towards vehicle-integrated photovoltaics10.1016/j.solmat.2023.112455 ↗
12. Development and testing of light-weight PV modules based on glass-fibre reinforcement10.1051/epjpv/2022007 ↗
13. Towards fiber-reinforced front-sheets for lightweight PV modules in VIPV10.1016/j.solmat.2024.113048 ↗
14. Design of fibre reinforced PV concepts for building integrated applications
15. Integration of dye solar cells in load-bearing translucent glass fiber-reinforced polymer laminates10.1177/0021998316656393 ↗
16. Modeling impact mechanics of 3D helicoidally architected polymer composites enabled by additive manufacturing for lightweight silicon photovoltaics technology10.3390/polym14061228 ↗
17. Design of fibre reinforced PV concepts for building integrated applications
18. Composite material with enhanced ultraviolet performance stability for photovoltaic modules10.1016/j.solmat.2019.109947 ↗
19. Photovoltaic modules encapsulated in composite material modified with ultraviolet additives10.1016/j.solmat.2021.111250 ↗
20. A comparison of 15 polymers for application in photovoltaic modules in PV-powered boats10.1016/j.apenergy.2011.10.042 ↗
21. Composite material incorporating protective coatings for photovoltaic cell encapsulation10.1016/j.solmat.2022.111879 ↗
22. Composite material with enhanced recyclability as encapsulant for photovoltaic modules10.1016/j.heliyon.2023.e20048 ↗
23. sunpoweredyachts.com, Maxeon® Air 330W flex, (n.d.). https://www.sunpoweredyachts.com/product-page/maxeon-air-330w-flex?srsltid=AfmBOopuRF_geT1-U9dDPzEV1Ukq9in4VUb84WXsRLQUTegegXkU9o3A (accessed May 13, 2025).