Flexible GaInP/Ga(In)As/Ge triple-junction space solar cells with a simple fabrication process based on Ge substrate thinning demonstrate power-to-mass ratios of 1.3 kW/kg
Source abstract
Abstract
One the primary strategies in space photovoltaics is the development of flexible and lightweight solar cells with a high specific power. Rigid lattice-matched GaInP/Ga(In)As/Ge 3 J solar cells with a thickness of ∼150 μm for 100 mm (4-inch) Ge substrates with a power-to-mass ratio of 0.47 kW/kg currently represent the benchmark for space solar cells. This paper analyses the performance of these 3 J solar cells as a function of Ge substrate thickness under various scenarios of both front and back surface recombination velocity of the Ge subcell. In order to validate the modelling results, we manufactured GaInP/Ga(In)As/Ge 3 J solar cells thinned down to 50 μm from an original thickness of 150 μm following the same fabrication procedures as conventional thick cells and without back surface passivation nor back reflectors. Remarkably, the efficiency of the thinned cells is the same than the non-thinned ones, closely aligning the model predictions. We demonstrate a power-to-mass ratio of 1.3 kW/kg, despite the semiconductor structure not being optimized for the AM0 spectrum. Finally, we outline potential pathways for improving the performance of these 3 J solar cells to achieve nearly 2 kW/kg. • Investigate LM GaInP/Ga(In)As/Ge 3J solar cells as flexible, lightweight solar cells with a high power-to-mass ratio. • Thinned 3J solar cells to 10-20μm without back passivation or reflector could get similar efficiency as 150μm thick cells. • GaInP/Ga(In)As/Ge 3J solar cells thinned to 50μm retain same efficiency as original 150μm cells using standard fabrication. • Thinned cells show 1.3 kW/kg power-to-mass ratio, outdoing standard 0.5 kW/kg despite not being optimized for AM0 spectrum. • We suggest pathways to boost 3J solar cell performance to nearly 2 kW/kg, using adaptable fabrication processes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: solar cell performance optimization · Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Caon · 2018
2. Cesi
3. Lightweight, flexible, high-efficiency III-V multijunction cells
4. Thin-film III–V solar cells using epitaxial lift-off
5. Kerf-less removal of Si, Ge, and III–V layers by controlled spalling to enable low-cost PV technologies10.1109/JPHOTOV.2012.2184267 ↗
6. Recent progress in epitaxial lift-off solar cells
7. Improvements in ultra‐light and flexible epitaxial lift‐off GaInP/GaAs/GaInAs solar cells for space applications10.1002/pip.3542 ↗
8. Development of germanium-on-germanium engineered substrates for III-V multijunction solar cells
9. Space III-V multijunction solar cells on Ge/Si virtual substrates
10. Sustainable production of ultrathin Ge freestanding membranes10.3390/su16041444 ↗
11. Theoretical and experimental assessment of thinned germanium substrates for III–V multijunction solar cells10.1002/pip.3281 ↗
12. Manufacturing process for III–V multijunction solar cells on germanium substrates with a total thickness below 60 microns10.1002/pip.3547 ↗
13. Designing of lightweight and ultrathin III‐V/Ge solar cells for flexible space and terrestrial photovoltaic blankets10.1002/pssa.202300709 ↗
14. High-efficiency thin-film InGaP/InGaAs/Ge tandem solar cells enabled by controlled spalling technology10.1063/1.3681397 ↗
15. The handling of thin substrates and its potential for new architectures in multi-junction solar cells technology
16. Passivated, highly reflecting, laser contacted Ge rear side for III-V multi-junction solar cells10.1109/JPHOTOV.2021.3087727 ↗
17. Advances in flexible and lightweight 3J space solar cells for high power density applications
18. P. F. P. Carlos Algora, ‘Using Bayesian Optimization to Increase the Efficiency of III-V Multijunction Solar Cells’, Adv. Theory Simul., under review.
19. Meusel
20. Optimization of the structure of a GaInP/GaAs/Ge triple-junction solar cell with an Al0.1Ga0.9As/Al0.8Ga0.2As integrated bragg reflector10.3103/S8756699014040165 ↗
21. Experimental optical and structural properties of ZnS, MgF2, Ta2O5, Al2O3 and TiO2 deposited by electron beam evaporation for optimum anti-reflective coating designs10.1016/j.solener.2022.08.006 ↗
22. Degradation of Ge subcells by thermal load during the growth of multijunction solar cells10.1002/pip.2948 ↗
23. ‘Development of the Lattice Matched GaInP/GaInAs/Ge Triple Junction Solar Cell with an Efficiency Over 40%’
24. Gras · 2008 · vol. 661 · 92
25. Casolba: balloon calibration of solar cells10.1051/e3sconf/20171602001 ↗
26. 2019
27. IEC 60904-1-1:2017 - Photovoltaic Devices - Part 1-1: Measurement of current-voltage Characteristics of multi-junction Photovoltaic (PV) Devices.’.
28. Atlas User’s Manual; Silvaco Inc.: Santa Clara, CA, USA.’.
29. Tunnel diode modeling, including nonlocal trap-assisted tunneling: a focus on III–V multijunction solar cell simulation10.1109/TED.2010.2061771 ↗
30. Eriksson · 2020
31. 10MeV proton irradiation effects on GaInP/GaAs/Ge concentrator solar cells and their component subcells10.1016/j.solmat.2016.09.042 ↗