Computational simulation of perovskite and silicon solar panel operating temperatures in varying ambient conditions
Source abstract
Abstract
In this study, the thermal behavior of perovskite panels is modeled in different ambient conditions, and simulated operation temperatures are compared with those of more commonly studied silicon solar panels. One specific need is for temperature model parameters for perovskite panels, to make, for instance, photovoltaic power prediction models that are more consistent with those of silicon solar panels. While the operating temperature of perovskite panels has gained less attention, it impacts their stability more compared with silicon devices . The applied 3D model allows studying the effects of varying ambient conditions on the heat distribution and temperature of commercial-sized panels. The results show that replacing the standard crystalline silicon with a typical perovskite absorber of ca. 1 . 6 eV band gap as the active material may significantly reduce the module temperature in normal operation: the modeled average cell temperature of the perovskite module was ca. 7 ° C less than that of the silicon module under reference conditions (ambient temperature 20 ° C , wind speed 1 m/s , and solar irradiance 800 W/m 2 ). The novelty of the study is the predicted set of perovskite-module-specific model parameters for the Sandia ( a = − 3 . 77 , b = − 0 . 129 ), Faiman ( U L0 = 37 . 93 W/m 2 K , U L1 = 10 . 47 Ws/m 3 K ), PVsyst ( U 0 = 19 . 29 W/m 2 K , U 1 = 5 . 27 Ws/m 3 K ), Mattei ( U PV = 4 . 49 v + 16 . 65 , v is the wind speed), and TRNSYS ( U Loss = 4 . 54 v + 16 . 38 ) models that were determined by fitting these models to the simulated temperature data in the varying ambient conditions. These parameters enable estimation of perovskite panel temperature in varying outdoor conditions with existing PV system models.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Photovoltaic System Optimization Techniques · Solar Thermal and Photovoltaic Systems · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Advances and challenges to the commercialization of organic–inorganic halide perovskite solar cell technology10.1016/j.mtener.2017.09.008 ↗
2. Solar cell efficiency tables (Version 63)10.1002/pip.3750 ↗
3. Toward the commercialization of perovskite solar modules10.1002/adma.202307357 ↗
4. PVsyst · 2025
5. King · 2004
6. Assessing the outdoor operating temperature of photovoltaic modules10.1002/pip.813 ↗
7. Sandia National Laboratories · 2025
8. Calculation of the polycrystalline PV module temperature using a simple method of energy balance10.1016/j.renene.2005.03.010 ↗
9. A simple correlation for the operating temperature of photovoltaic modules of arbitrary mounting10.1016/j.solmat.2008.05.016 ↗
10. Operating temperature of photovoltaic modules: A survey of pertinent correlations10.1016/j.renene.2008.04.009 ↗
11. Townsend · 1989
12. M.A. Green, General temperature dependence of solar cell performance and implications for device modelling, Prog. Photovolt., Res. Appl. 11 (5) 333–340, http://dx.doi.org/10.1002/pip.496.10.1002/pip.496 ↗
13. On the temperature dependence of photovoltaic module electrical performance: A review of efficiency/power correlations10.1016/j.solener.2008.10.008 ↗
14. Impact of perovskite/silicon tandem module design on hot-spot temperature10.1021/acsaem.8b00480 ↗
15. The influence of perovskite layer and hole transport material on the temperature stability about perovskite solar cells10.1016/j.solener.2017.09.039 ↗
16. Model for the prediction of the lifetime and energy yield of methyl ammonium lead iodide perovskite solar cells at elevated temperatures10.1021/acsami.9b00923 ↗
17. An effective method of predicting perovskite solar cell lifetime–Case study on planar CH3NH3PbI3 and HC(NH2)2PbI3 perovskite solar cells and hole transfer materials of spiro-OMeTAD and PTAA10.1016/j.solmat.2016.12.043 ↗
18. A thermal model for photovoltaic panels under varying atmospheric conditions10.1016/j.applthermaleng.2010.03.012 ↗
19. Temperature distribution of photovoltaic module based on finite element simulation10.1016/j.solener.2014.10.040 ↗
20. Self-heating of planar perovskite solar cells depending on active material properties10.1021/acsaem.4c00077 ↗
21. Experimental investigation and modeling of the thermal behavior of a solar PV module10.1016/j.solmat.2017.06.052 ↗
22. Three-dimensional thermal modeling of a photovoltaic module under varying conditions10.1016/j.solener.2012.05.034 ↗
23. Heat transfer modeling and temperature experiments of crystalline silicon photovoltaic modules10.1016/j.solener.2017.02.049 ↗
24. A thermal model for photovoltaic systems10.1016/S0038-092X(00)00149-3 ↗
25. D.L. King, Photovoltaic module and array performance characterization methods for all system operating conditions, in: Proceedings of the NREL/SNL Photovoltaic Program Review Meeting, 1997, pp. 1–22.10.1063/1.52852 ↗
26. Tselepis · 2002
27. Comparison of measured and predicted long term performance of grid a connected photovoltaic system10.1016/j.enconman.2006.10.021 ↗
28. Photovoltaic modules operating temperature estimation using a simple correlation
29. P. Mora Segado, J. Carretero, M. Sidrach-de Cardona, Models to predict the operating temperature of different photovoltaic modules in outdoor conditions, Prog. Photovolt., Res. Appl. 23 (10) 1267–1282, http://dx.doi.org/10.1002/pip.2549.10.1002/pip.2549 ↗
30. Prediction model of photovoltaic module temperature for power performance of floating PVs10.3390/en11020447 ↗
31. Modeling of the nominal operating cell temperature based on outdoor weathering10.1016/j.solmat.2011.01.020 ↗
32. Numerical simulation of heat distribution in RGO-contacted perovskite solar cells using COMSOL10.1016/j.solener.2019.12.050 ↗
33. COMSOL simulation of heat distribution in perovskite solar cells: Coupled optical–electrical–thermal 3-D analysis10.1109/JPHOTOV.2019.2940886 ↗
34. Enhancement of the thermal properties of heterojunction perovskite solar cells by nanostructured contacts design10.1016/j.solener.2020.04.002 ↗
35. Dynamic temperature effects in perovskite solar cells and energy yield10.1039/D1SE01381E ↗
36. Outdoor measurement and modeling of perovskite module temperatures
37. Performance analysis of perovskite and dye-sensitized solar cells under varying operating conditions and comparison with monocrystalline silicon cell10.1016/j.applthermaleng.2017.08.030 ↗
38. Varjopuro · 2025
39. Modelling of a double-glass photovoltaic module using finite differences10.1016/j.applthermaleng.2005.02.008 ↗
40. COMSOL, Heat Transfer Module User’s Guide, https://doc.comsol.com/6.2/doc/com.comsol.help.heat/HeatTransferModuleUsersGuide.pdf. (Accessed 8 March 2025).
41. Solar and wind induced external coefficients - Solar collectors
42. Finite element thermal analysis of a solar photovoltaic module10.1016/j.egypro.2012.02.050 ↗
43. Experimental research on the convective heat transfer coefficient of photovoltaic panel10.1016/j.renene.2021.12.090 ↗
44. Full-scale measurements of wind-induced convective heat transfer from a roof-mounted flat plate solar collector10.1016/S0038-092X(97)00119-9 ↗
45. The AM1.5 absorption factor of thin-film solar cells10.1016/j.solmat.2009.12.010 ↗
46. L.C. Hirst, N.J. Ekins-Daukes, Fundamental losses in solar cells, Prog. Photovolt., Res. Appl. 19 (3) 286–293, http://dx.doi.org/10.1002/pip.1024.10.1002/pip.1024 ↗
47. Y. An, T. Ma, X. Li, Energy tracing of photovoltaic cells, Sol. RRL 5 (7) 2100199, http://dx.doi.org/10.1002/solr.202100199.10.1002/solr.202100199 ↗
48. Intrinsic concentration, effective densities of states, and effective mass in silicon10.1063/1.345414 ↗
49. Effect of Thermal and structural disorder on the electronic structure of hybrid perovskite semiconductor CH3NH3PbI310.1021/acs.jpclett.6b01207 ↗
50. PERC silicon PV infrared to ultraviolet optical model10.1016/j.solmat.2020.110655 ↗
51. Optical properties and limiting photocurrent of thin-film perovskite solar cells10.1039/C4EE03224A ↗
52. Detailed balance limit of efficiency of p–n junction solar cells10.1063/1.1736034 ↗
53. Green · 1982
54. Temperature dependence of photovoltaic cells, modules and systems
55. Crystalline silicon cell performance at low light intensities10.1016/j.solmat.2009.03.018 ↗
56. On the variability of the temperature coefficients of mc-si solar cells with irradiance10.1016/j.egypro.2016.07.002 ↗
57. A simple and efficient determination of the ideality factor of solar cells and modules from the knee point of the shunt resistance curve10.1007/s13369-023-07860-3 ↗
58. The impact of silicon solar cell architecture and cell interconnection on energy yield in hot & sunny climates10.1039/C7EE00286F ↗
59. Dual-site synergistic passivation for highly efficient and stable perovskite solar cells10.1002/aenm.202202189 ↗
60. Perovskite solar cells go outdoors: Field testing and temperature effects on energy yield10.1002/aenm.202000454 ↗
61. J.A. Karhu, A.V. Lindfors, W. Wandji Nyamsi, T. Salola, A. Poikonen, M. Pitkänen, T. Mielonen, O. Mantikka, Outdoor Solar Power Laboratories at the Finnish Meteorological Institute, Submitted for publication.
62. Photovoltaic system modeling: A validation study at high latitudes with implementation of a novel DNI quality control method10.1016/j.solener.2020.04.068 ↗
63. Analysis on the features of NOCT and NMOT tests with photovoltaic module10.1109/ACCESS.2020.3017372 ↗
64. W. Herrmann, C. Monokroussos, K. Lee, Comparison of different approaches to determine the Nominal PV Module Operating Temperature (NMOT), in: 38th European Photovoltaic Solar Energy Conference and Exhibition, 2021.
65. International Electrotechnical Commission · 2021
66. Comparing methods for the long-term performance assessment of bifacial photovoltaic modules in nordic conditions10.1016/j.renene.2023.119473 ↗
67. Outdoor testing of PV module temperature and performance under different mounting and operational conditions10.1016/j.solmat.2010.04.022 ↗