Effect of methylammonium chloride concentration on crystallinity, photovoltaic performance, and stability of air-processed perovskite solar cells
Source abstract
Abstract
Dopants in hybrid perovskite significantly influence the photovoltaic properties of air-processed perovskite solar cells (a-p PSCs). Chlorine (Cl) is a doping element that substantially increases the crystal and grain sizes and modifies surface morphology as well as perovskite thin films. However, the effect of methylammonium chloride (MACl) as a doping agent has not been systematically studied over a notable range of concentrations. In this study, Cl wt% (or MACl mol) in perovskite precursor solutions (MAI + PbI 2 ) has been varied from 0 to 20 wt% (or MACl from 0 to 0.324 mol). It is found that the perovskite thin films prepared from stoichiometric precursor solutions under an air ambient with 0 or 0.023 mol of MACl contain PbI 2 impurity, probably due to the loss of MA + ions during thermal annealing and/or to the moisture attachment on perovskite compounds. This causes a lower photocurrent density at short circuit (J SC ) and poorer conversion efficiency (PCE) of the corresponding a-p PSCs. The addition of MACl helps to reduce PbI 2 content and increase perovskite crystal and grain sizes as well. However, an excess amount of MACl leads to a rough and porous surface of perovskite with methylammonium species that deteriorate the photovoltaic performance and stability of a-p PSCs. With an optimal concentration of MACl around like 5 wt% (or 0.107 mol), unencapsulated a-p PSCs can hold their original PCE of 18.1 % after a continuous illumination for 30 min under ambient conditions. The enhanced stability of air-processed perovskite thin films should come from the presence of a more electronegative chlorine compared to moisture.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26%10.1038/nenergy.2017.32 ↗
2. Solar cell efficiency tables (Version 63)10.1002/pip.3750 ↗
3. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
4. Efficient perovskite solar cells via improved carrier management10.1038/s41586-021-03285-w ↗
5. S. Min Park, M. Wei, J. Xu, H.R. Atapattu, F.T. Eickemeyer, K. Darabi, L. Grater, Y. Yang, C. Liu, S. Teale, B. Chen, H. Chen, T. Wang, L. Zeng, A. Maxwell, Z. Wang, K.R. Rao, Z. Cai, S.M. Zakeeruddin, J.T. Pham, C.M. Risko, A. Amassian, M.G. Kanatzidis, K.R. Graham, M. Grätzel, E.H. Sargent, Engineering ligand reactivity enables high-temperature operation of stable perovskite solar cells, n.d. https://www.science.org/doi/10.1126/science.adi4107 (accessed July 13, 2023).10.1126/science.adi4107 ↗
6. W. Peng, K. Mao, F. Cai, H. Meng, Z. Zhu, T. Li, S. Yuan, Z. Xu, X. Feng, J. Xu, M.D. McGehee, J. Xu, Reducing nonradiative recombination in perovskite solar cells with a porous insulator contact, n.d. https://www.science.org/doi/10.1126/science.ade3126 (accessed February 13, 2025).
7. Advances in modelling and simulation of halide perovskites for solar cell applications
8. Controlling CH3NH3PbI3- xClx film morphology with two-step annealing method for efficient hybrid perovskite solar cells10.1021/acsami.5b03324 ↗
9. Direct evidence of chlorine-induced preferential crystalline orientation in methylammonium lead iodide perovskites grown on TiO210.1021/acs.jpcc.6b11529 ↗
10. Role of chloride in the morphological evolution of organo-lead halide perovskite thin films10.1021/nn5041922 ↗
11. MAPbI3-xClx mixed halide perovskite for hybrid solar cells: the role of chloride as dopant on the transport and structural properties10.1021/cm402919x ↗
12. Unravelling the effects of cl addition in single step CH3NH3PbI3 perovskite solar cells10.1021/cm502710r ↗
13. The optoelectronic role of chlorine in CH3NH3PbI3 (Cl)-based perovskite solar cells
14. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
15. Long-range balanced electron-and hole-transport lengths in organic-inorganic CH3NH3PbI310.1126/science.1243167 ↗
16. Absorbance studies of perovskite CH3NH3PbI(3-x)Clx as light harvester in solar cell10.4028/www.scientific.net/AMR.1112.282 ↗
17. Research update: physical and electrical characteristics of lead halide perovskites for solar cell applications10.1063/1.4871795 ↗
18. Chemical state of chlorine in perovskite solar cell and its effect on the photovoltaic performance10.1007/s10853-018-2571-2 ↗
19. Stable FAPbI3 perovskite solar cells via alkylammonium chloride-mediated crystallization control10.1021/acsami.4c01881 ↗
20. Doping mechanism of perovskite films with PbCl2Prepared by magnetron sputtering for enhanced efficiency of solar cells10.1021/acsami.2c11929 ↗
21. Formation of a nanoporous PbI2 layer framework via 4-tBP additive to improve the performance and stability of two-step prepared hybrid perovskite solar cells under ambient conditions10.1002/er.8615 ↗
22. Unraveling its intrinsic role of CH3NH3Cl doping for efficient enhancement of perovskite solar cells from fine insight by ultrafast charge-transfer dynamics10.1002/solr.202201039 ↗
23. Ambient fabrication of organic–inorganic hybrid perovskite solar cells
24. Defect healing in FAPb(I1-xBrx)3 perovskites: multifunctional fluorinated sulfonate surfactant anchoring enables >21% modules with improved operation stability
25. Green antisolvent additive engineering to improve the performance of perovskite solar cells10.1016/j.jechem.2021.06.023 ↗
26. Μethylammonium chloride: a key additive for highly efficient, stable, and Up-Scalable perovskite solar cells10.1002/eem2.12040 ↗
27. Efficient and stable hybrid perovskite prepared at 60% relative humidity with a hydrophobic additive in anti-solvent10.1016/j.solmat.2020.110625 ↗
28. Ionic surfactants of different dipole moments as anti-solvent additives for air-processing MAPbI3−xClx perovskite thin films10.1007/s10854-023-11670-6 ↗
29. X-Ray line broadening in metals10.1088/0370-1298/62/11/110 ↗
30. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray Debye-Scherrer spectrum10.1080/14786435608238074 ↗
31. Characterization of mechanically alloyed nanocrystalline Fe(Al): crystallite size and dislocation density
32. Estimation of crystallite size, lattice strain and dislocation density of nanocrystalline carbonate substituted hydroxyapatite by X-ray peak variance analysis10.1016/j.mspro.2014.07.260 ↗
33. Warren · 1968
34. X-ray diffraction line profile analysis of undoped and Se-Doped SnS thin films using scherrer's, Williamson–hall and size–strain plot methods10.1007/s11664-018-6791-7 ↗
35. A direct correlation between structural and morphological defects of TiO2 thin films on FTO substrates and photovoltaic performance of planar perovskite solar cells10.1016/j.mssp.2023.107452 ↗
36. X-ray diffraction line profile analysis of KBr thin films10.1007/s00339-016-0293-3 ↗
37. Additive engineering by tetrabutylammonium iodide for antimony selenosulfide solar cells10.1088/1361-6463/acf507 ↗
38. Gwyddion: an open-source software for SPM data analysis
39. Study on the correlations between the structure and photoelectric properties of CH3NH3PbI3 perovskite light-harvesting material10.1016/j.jpowsour.2015.03.114 ↗
40. Voltage scanning speed determination and current-voltage curves of different types of perovskite solar cells10.1109/JPHOTOV.2022.3143459 ↗
41. Determination of minority carrier diffusion length of sprayed-Cu2ZnSnS4 thin films10.1016/j.sse.2015.12.003 ↗
42. Minority carrier diffusion length extraction in Cu2ZnSn(Se,S) 4 solar cells10.1063/1.4821841 ↗
43. Determination of the minority carrier diffusion length of SnS using electro-optical measurements10.1007/s13391-013-2194-3 ↗
44. Spectral response of CdS/CdTe solar cells obtained with different S/Cd ratios for the CdS chemical bath10.1016/j.solmat.2006.02.020 ↗
45. Performance boost by dark electro treatment in MACl-Added FAPbI3 perovskite solar cells10.1002/adom.202401902 ↗
46. Stranks
47. Surface engineering of perovskite films for efficient solar cells
48. Roughness and structural modification of PbI2 thin films by isopropanol treatment to improve methylammonium lead halide formation and solar cell efficiency10.1007/s10854-019-02100-7 ↗
49. Interpretation of the recombination lifetime in halide perovskite devices by correlated techniques10.1021/acs.jpclett.2c01776 ↗