Rheology and fine-line screen printing of solar cell front-side metallization pastes – What really matters
Source abstract
Abstract
Current solar research focuses on reducing silver consumption in order to enable the large-scale increase in PV installations needed to address climate change and the growing global energy demand. This study explores how rheological properties of metallization pastes, such as yield stress, high shear viscosity , slip stress, and slip velocity , affect fine-line screen printing outcomes, including line width , height, uniformity, and interruptions. A model system based on capillary suspensions using Texanol as bulk liquid and employing four secondary liquids with varying interfacial tension was developed for systematic paste property variations. The resulting capillary suspensions exhibited a yield stress and pronounced wall slip below the yield stress, with the slip layer consisting of the bulk liquid. Particle volume fraction, secondary liquid to particle ratio, and type of secondary liquid were varied to systematically modify yield stress, high shear viscosity , and slip velocity of the pastes. Printing experiments revealed that higher yield stress reduced spreading but maintained similar paste laydown. High shear viscosity was identified as critical for controlling paste transfer and achieving narrow line widths. Excessive slip caused inhomogeneous line morphology and reduced paste transfer, indicating an optimal slip range for high-quality printing. These findings were applied to develop a metallization paste achieving a 24 μm line width and 0.48 aspect ratio, achieving an efficiency of 23.53 % for PERC cells with 16 % lower laydown than commercial pastes. This study highlights the importance of yield stress, viscosity, and slip in screen printing, aiding future paste development to reduce silver consumption in photovoltaics .
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Nanomaterials and Printing Technologies · Rheology and Fluid Dynamics Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Feldman · 2024
2. Fischer · 2024
3. Silver Supply and Demand | The Silver Institute, The Silver Institute (n.d.). https://silverinstitute.org/silver-supply-demand/#silver_demand (accessed March 11, 2025).
4. Advancements in shingle matrix technology for high volume production
5. Design considerations for multi-terawatt scale manufacturing of existing and future photovoltaic technologies: challenges and opportunities related to silver, indium and bismuth consumption10.1039/D1EE01814K ↗
6. Hornbogen · 2019
7. Review of light-induced degradation in crystalline silicon solar cells10.1016/j.solmat.2015.11.047 ↗
8. Screen printing metallization of boron emitters10.1002/pip.933 ↗
9. Double screen printed metallization of crystalline silicon solar cells as low as 30μm metal line width for mass production10.1016/j.solmat.2012.01.018 ↗
10. Analysis of fine-line screen and stencil-printed metal contacts for silicon wafer solar cells10.1109/JPHOTOV.2014.2388073 ↗
11. Shading losses of solar-cell metal grids10.1063/1.350580 ↗
12. Wang · 2015
13. Optimization of lead- and cadmium-free front contact silver paste formulation to achieve high fill factors for industrial screen-printed Si solar cells10.1016/j.solmat.2009.01.003 ↗
14. Laudisio · 2010
15. Conductive metal paste and use thereof
16. Non-volatile free silver paste formulation for front-side metallization of silicon solar cells10.1016/j.solmat.2019.110040 ↗
17. The importance of paste rheology in improving fine line
18. Paste rheology correlating with dispensed finger geometry10.1109/JPHOTOV.2013.2278657 ↗
19. Influence of silver paste rheology and screen parameters on the front side metallization of silicon solar cell10.1016/j.mssp.2014.08.023 ↗
20. How rheological properties affect fine-line screen printing of pastes: a combined rheological and high-speed video imaging study10.1007/s11998-018-0091-2 ↗
21. Effect of polymer binders in screen printing technique of silver pastes10.1007/s10965-013-0277-3 ↗
22. Silver content effect on rheological and electrical properties of silver pastes10.1007/s10854-011-0607-3 ↗
23. The link between Ag‐paste rheology and screen‐printed solar cell metallization10.1002/admt.202000654 ↗
24. Rheology and screen-printing performance of model silver pastes for metallization of Si-solar cells10.3390/coatings8110406 ↗
25. A review of the slip (wall depletion) of polymer solutions, emulsions and particle suspensions in viscometers: its cause, character, and cure10.1016/0377-0257(94)01282-M ↗
26. A review on wall slip in high solid dispersions10.1007/s00397-017-1002-7 ↗
27. Factors affecting the rheology and processability of highly filled suspensions10.1146/annurev-chembioeng-060713-040211 ↗
28. Slip effects in capillary and parallel disk torsional flows of highly filled suspensions10.1122/1.550049 ↗
29. Apparent slip and viscoplasticity of concentrated suspensions10.1122/1.1879043 ↗
30. Impact of wall slip on screen printing of front-side silver pastes for silicon solar cells10.1109/JPHOTOV.2016.2626147 ↗
31. Improving wall slip behavior of silver pastes on screen emulsions for fine line screen printing10.1016/j.solmat.2019.109969 ↗
32. Slip velocity and slip layer thickness in flow of concentrated suspensions10.1002/(SICI)1097-4628(19981017)70:3<515::AID-APP13>3.0.CO;2-# ↗
33. Apparent wall slip velocity coefficients in concentrated suspensions of noncolloidal particles10.1122/1.550631 ↗
34. Bingham · 1922
35. Explicit formulas for slip and fluidity10.1122/1.2116364 ↗
36. Wall slip corrections for Couette and parallel disk viscometers10.1122/1.549963 ↗
37. The theoretical fundamentals of the screen printing process10.1108/eb044350 ↗
38. Front side metallization of silicon solar cells – a high-speed video imaging analysis of the screen printing process10.1016/j.solmat.2020.110721 ↗
39. Capillary forces in suspension rheology10.1126/science.1199243 ↗
40. Capillary suspensions: particle networks formed through the capillary force10.1016/j.cocis.2014.10.004 ↗
41. Highly conductive, printable pastes from capillary suspensions
42. Tuning suspension rheology using capillary forces10.1039/c2sm25681a ↗
43. Mewis · 2012
44. Influence of particle shape on the rheological behavior of three-phase non-brownian suspensions10.1016/j.colsurfa.2016.03.006 ↗
45. Challenges in rheological characterization of highly concentrated suspensions - a case study for screen-printing silver pastes
46. Effects of temperature and surface roughness on time-dependent development of wall slip in steady torsional flow of concentrated suspensions10.1122/1.550537 ↗
47. The separation of elastic and viscous effects in polymer flow10.1122/1.548905 ↗
48. End corrections in the capillary flow of polyethylene10.1063/1.1722814 ↗
49. Structure of particle networks in capillary suspensions with wetting and nonwetting fluids10.1021/acs.langmuir.5b04246 ↗
50. Using capillary bridges to tune stability and flow behavior of food suspensions10.1016/j.foodhyd.2014.01.027 ↗
51. Studying knotless screen patterns for fine-line screen printing of Si-solar cells10.1109/JPHOTOV.2019.2959939 ↗
52. Progress with screen printed metallization of silicon solar cells - towards 20 μm line width and 20 mg silver laydown for PERC front side contacts10.1016/j.solmat.2022.111804 ↗