journal article·2025-06

Using binary-eutectic phase change materials and ZnO/aluminum nitride nanofillers to improve photovoltaic efficiency

Neda Azimi, Esmail Sharifzadeh

Publisher page

Abstract

This study examines the effectiveness of binary-eutectic phase change materials (BE-PCMs) for controlling the surface heat of PV panels. Comprising petroleum jelly, beeswax, and ZnO/aluminum nitride (AlN) nanoparticles, five PCMs are synthesized—PCM#a through PCM#e—with beeswax to petroleum jelly volume ratios of 5 %/95 %, 10 %/90 %, 15 %/85 %, 20 %/80 %, and 25 %/75 %. The primary objective is to enhance temperature regulation and electric efficiency of PV panel by BE-PCMs, which its performance optimized using Response Surface Methodology. The effects of beeswax volume fraction in petroleum jelly (x 1 = 5–25 %), weight ratio of ZnO to AlN (x 2 = 0.2–1), and ZnO/AlN nanoparticle weight fraction (x 3 = 0–10%wt) are evaluated. Results indicated that BE-PCMs lowered the PV panel`s maximum temperature from 61.84 °C to 47.65 °C, compared to a reduction to 53.97 °C with BE-PCM alone. The optimal volume fractions of beeswax and petroleum jelly were found to be 13.86 % and 86.14 %, respectively; when beeswax exceeded 13.86 %, PV temperature increased. Furthermore, x 3 values of 8–10 % yielded the lowest temperature and highest electrical efficiency. Specifically, BE-PCMs with x 3 = 8.77%wt and x 2 = 0.574 achieved a peak electrical efficiency of 12.98 % and a power output of 7.79 W.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Potential of solar energy in developing countries for reducing energy-related emissions10.1016/j.rser.2018.03.065 ↗
2. Environmental impacts of solar photovoltaic systems: a critical review of recent progress and future outlook10.1016/j.scitotenv.2020.143528 ↗
3. Effects of cooling on performance of photovoltaic/thermal (PV/T) solar panels: a comprehensive review10.1016/j.solener.2023.111829 ↗
4. Experimental study on PVT − PCM system performance using bubble-driven flow10.1016/j.icheatmasstransfer.2023.106919 ↗
5. Performance investigation of metal foam coupled to phase change material as coolant of photovoltaic concentrator systems: optimization and electrical efficiency analysis10.1016/j.jer.2024.07.022 ↗
6. Innovations in phase change materials for diverse industrial applications: a comprehensive review10.1016/j.rechem.2024.101552 ↗
7. Thermal performance and flash point analyses of concentrator photovoltaic (CPV) system using multiple types of PCMs and various panel inclination angles under the effect of a constant heat flux10.1016/j.jer.2024.09.018 ↗
8. Thermal management and electrical efficiency for concentrator photovoltaic systems using multiple phase change materials10.1016/j.applthermaleng.2023.122207 ↗
9. Role of phase change materials in thermal energy storage: potential, recent progress and technical challenges
10. Performance analysis of a low concentrated photovoltaic system thermal management by hybrid phase change materials10.1016/j.icheatmasstransfer.2024.108025 ↗
11. Numerical simulation and analysis of heat transfer and melting rate of nano-enhanced PCM composite embedded in a concentrator photovoltaic system10.1016/j.est.2023.109247 ↗
12. Thermal management of photovoltaic panel by honeycomb-like metal structure filled with phase change material10.1016/j.icheatmasstransfer.2024.107649 ↗
13. Investigation and optimization of PCM melting with nanoparticle in a multi-tube thermal energy storage system10.1016/j.csite.2021.101643 ↗
14. Using composite of phase change materials and aluminum wires to optimize thermal and electrical efficiencies of photovoltaic module10.1007/s10973-023-12624-0 ↗
15. Optimization of thermal and electrical efficiencies of a photovoltaic module using combined PCMs with a thermo-conductive filler10.1016/j.solener.2021.11.066 ↗
16. Impact of building integrated photovoltaic-phase change material panels on building energy efficiency improvement: a case study
17. Experimental investigation on using a novel phase change material (PCM) in micro structure photovoltaic cooling system10.1016/j.icheatmasstransfer.2018.12.020 ↗
18. Energy, exergy, economic, and enviroeconomic assessment of a photovoltaic module incorporated with a paraffin-metal foam composite: an experimental study10.1016/j.energy.2021.121807 ↗
19. Novel multi-layer nano-modified PCM configuration for efficient thermal management of photovoltaic-thermal systems10.1016/j.est.2024.114352 ↗
20. Evaluation of nanostructured GNP and CuO compositions in PCM-based heat sinks for photovoltaic systems10.1016/j.est.2022.105240 ↗
21. Enhancement of photovoltaic module performance by thermal management using shape-stabilized PCM composites10.1016/j.solmat.2024.112948 ↗
22. Hierarchical core–shell structure of ZnO nanotube/MnO2 nanosheet arrays on a 3D graphene network as a high performance biosensing platform10.1039/C6RA07197J ↗
23. Microwave induced synthesis of ZnO nanorods and their efficacy as a drug carrier with profound anticancer and antibacterial properties10.1016/j.toxrep.2019.01.006 ↗
24. Porous ZnO nanorod for targeted delivery of doxorubicin: in vitro and in vivo response for therapeutic applications10.1039/c2jm35013k ↗