journal article·2025-04Open access

Silver reduction through direct wire bonding for Silicon Heterojunction solar cells

Yanxin Liu, Ian Marius Peters, Kaining Ding, Bart Pieters, Karsten Bittkau, Uwe Rau, Mohamed Issifi Yacouba, Henrike Gattermann, Volker Lauterbach, Andreas Lambertz

Abstract

This study introduces Direct Wire Bonding (DWB) as a low-temperature method for interconnecting finger-free Silicon Heterojunction (SHJ) solar cells using low-cost, highly conductive copper wires. The wires are attached to the SHJ cells via discrete pads of conductive paste, enabling direct current extraction from the indium tin oxide (ITO) layer and facilitating transport to sequentially connected cells. We describe the DWB fabrication process and demonstrate its potential by comparing its performance to that of traditional SHJ modules. Our test devices show that DWB modules achieve competitive efficiencies, 0.03 % abs. higher in experiments than the 0BB and multi-wire solutions—while significantly reducing material consumption. In the study we give an outlook on the possible improvement in efficiency. The economic analysis further demonstrates that DWB can reduce production costs to as low as 18 % of the cost of other SHJ metallization and interconnection techniques. These initial results suggest that DWB is a cost-effective solution that addresses both economic and material scarcity challenges in the photovoltaic industry. • Introduced an innovative method to substitute traditional silver-finger-and-ribbon designs by utilizing 30 μm copper wires to directly transport current of metallization-free SHJ solar cells, enhancing cost efficiency. • The initial prototype exhibits higher efficiency to 0BB and multi-wire configurations. • Performed numerical simulations to analyze power dissipation in the device using the new approach, comparing the results with those of traditional SHJ techniques. • The economic analysis revealed the potential of the new method to decrease consumption of SHJ on silver and other limited resources, achieving a total cost that is merely 18 % of that associated with standard SHJ solutions.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. ITRPV 15th Edition Presentation, n.d. https://www.vdma.org/international-technology-roadmap-photovoltaic (accessed July 12, 2024).
2. Design considerations for multi-terawatt scale manufacturing of existing and future photovoltaic technologies: challenges and opportunities related to silver, indium and bismuth consumption10.1039/D1EE01814K ↗
3. U. National Minerals Information Center, Bismuth Data Sheet - Mineral Commodity Summaries 2020, n.d.
4. Silver-lean metallization and hybrid contacts via plating on screen-printed metal for silicon solar cells manufacturing
5. A free and open source finite-difference simulation tool for solar modules
6. Modeling and measurement of contact resistances10.1109/T-ED.1987.22957 ↗
7. Cell/module integration technology withwire-embedded EVA sheet
8. A. Lachowicz, A. Descoeudres, J. Champliaud, A. Faes, J. Geissbühler, M. Despeisse, S. Nicolay, C. Ballif, COPPER PLATING PROCESSES FOR SILICON HETEROJUNCTION SOLAR CELLS: AN OVERVIEW, n.d.