Ambient-air fabrication of bar-coated ionic liquid-assisted perovskite films with micrometer-scale grain sizes for stable solar cells
Source abstract
Abstract
Fabricating perovskite solar cells (PSCs) in ambient air may lower production costs and enhance the feasibility of commercialization of this cutting-edge technology. However, ambient-air fabrication of perovskite films often results in rough surfaces, pinholes, and non-uniform coverage, which increase non-radiative recombination in PSCs. In this work, we fabricated uniform pinhole-free perovskite films with large crystal domains of several tens of micrometers under ambient conditions (40 % relative humidity) by bar coating using 1-hexyl-3-methylimidazolium chloride as an ionic liquid (IL). The IL molecules in the perovskite solution protected the perovskite from interacting with moisture, facilitating the fabrication of high-quality perovskite films under ambient conditions. PSCs with bar-coated IL-assisted perovskite films exhibited over 90 % of their initial solar output after storage for 1000 h in the dark under ambient conditions (relative humidity of 40 %–50 %), illustrating their higher long-term moisture stability than that of devices with conventional spin-coated perovskite films. This high moisture stability is attributed to the dense perovskite grains with sizes of one to several tens of micrometers obtained by bar coating rather than spin coating.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. The benefits of ionic liquids for the fabrication of efficient and stable perovskite photovoltaics10.1016/j.cej.2021.128461 ↗
2. Metal oxide compact electron transport layer modification for efficient and stable perovskite solar cells10.3390/ma13092207 ↗
3. Unleashing the potential of industry viable roll-to-roll compatible technologies for perovskite solar cells: challenges and prospects10.1016/j.mattod.2024.06.013 ↗
4. Band gap tuning of perovskite solar cells for enhancing the efficiency and stability: issues and prospects10.1039/D4RA01640H ↗
5. Recent advances in wide-bandgap perovskite solar cells10.1002/adma.202418622 ↗
6. A comprehensive review on potential of diffusion length enhancement to upraise perovskite solar cell performance10.1088/1402-4896/ad3a26 ↗
7. Buried interface molecular hybrid for inverted perovskite solar cells10.1038/s41586-024-07723-3 ↗
8. A promising scalable bar coating approach using a single crystal-derived precursor ink for high-performance large-area perovskite solar cells, Mater
9. Efficient perovskite solar mini-modules fabricated via bar-coating using 2-methoxyethanol-based formamidinium lead tri-iodide precursor solution10.1016/j.joule.2021.08.005 ↗
10. Perovskite solar cell fabrication via scalable thermal-assisted and meniscus-guided bar-coating method in open air10.1002/jccs.202300190 ↗
11. Hot gas-blowing assisted crystallinity management of bar-coated perovskite solar cells and modules10.1002/smsc.202300069 ↗
12. Ink engineering in blade-coating large-area perovskite solar cells
13. Efficient blade-coated wide-bandgap and tandem perovskite solar cells via a three-step restraining strategy10.1002/adma.202414790 ↗
14. Fabrication and morphological characterization of high-efficiency blade-coated perovskite solar modules10.1021/acsami.9b05730 ↗
15. Current spray-coating approaches to manufacture perovskite solar cells10.1016/j.rinp.2022.106144 ↗
16. Perovskite ink with an ultrawide processing window for efficient and scalable perovskite solar cells in ambient air10.1021/acsami.9b17141 ↗
17. Advances in spray-cast perovskite solar cells10.1021/acs.jpclett.8b00311 ↗
18. Slot-die coating for scalable fabrication of perovskite solar cells and modules10.1002/admt.202302082 ↗
19. Recent advancements on slot-die coating of perovskite solar cells: the Lab-to-Fab optimisation process10.3390/en17163896 ↗
20. Roll-to-roll gravure-printed flexible perovskite solar cells using eco-friendly antisolvent bathing with wide processing window10.1038/s41467-020-18940-5 ↗
21. One-step polymer assisted roll-to-roll gravure-printed perovskite solar cells without using anti-solvent bathing
22. Perovskite solar cells with atomically coherent interlayers on SnO(2) electrodes10.1038/s41586-021-03964-8 ↗
23. Efficient perovskite solar cells via improved carrier management10.1038/s41586-021-03285-w ↗
24. Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells10.1038/s41586-021-03406-5 ↗
25. Effect of relative humidity during the preparation of perovskite solar cells: performance and stability10.1016/j.solener.2020.02.052 ↗
26. Stabilizing the efficiency beyond 20% with a mixed cation perovskite solar cell fabricated in ambient air under controlled humidity10.1002/aenm.201700677 ↗
27. Humidity resistant fabrication of CH3NH3PbI3 perovskite solar cells and modules10.1016/j.nanoen.2017.06.039 ↗
28. Fully-ambient-processed mesoscopic semitransparent perovskite solar cells by islands-structure-MAPbI3-xClx-NiO composite and Al2O3/NiO interface engineering10.1016/j.nanoen.2018.04.036 ↗
29. Impact of humidity in triple cation perovskite solar cells: surface analysis10.1016/j.mssp.2022.107100 ↗
30. The impact of moisture on the stability and degradation of perovskites in solar cells10.1039/D3MA00828B ↗
31. Ambient-air fabrication of stable mixed cation perovskite planar solar cells with efficiencies exceeding 22% using a synergistic mixed antisolvent with complementary properties10.1016/j.nanoen.2021.106387 ↗
32. Thermal-radiation-driven ultrafast crystallization of perovskite films under heavy humidity for efficient inverted solar cells
33. Over 20% efficiency in printable mesoscopic perovskite solar cells with enhanced open-circuit voltage via a multifunctional ionic liquid
34. Optimized crystallization via ionic liquid engineering for air-fabricated perovskite solar cells with efficiency of 25.11%10.1002/solr.202500104 ↗
35. Enhanced chemical interaction between ionic liquid and halide perovskite to improve performance of perovskite solar cells, mater
36. Imidazole-based ionic liquid engineering for perovskite solar cells with high efficiency and excellent stability10.1021/acsami.4c05923 ↗
37. Fabrication of perovskite solar cells in ambient air by blocking perovskite hydration with guanabenz acetate salt10.1038/s41560-023-01358-w ↗
38. The synergistic effect of dry air and surfactants enables water to be a promising green solvent for stable and efficient perovskite solar cells10.1039/D3EE02459H ↗
39. Ambient air processed highly oriented perovskite solar cells with efficiency exceeding 23% via amorphous intermediate
40. Xia
41. Compact TiO2/Anatase TiO2 single-crystalline nanoparticle electron-transport bilayer for efficient planar perovskite solar cells10.1021/acssuschemeng.8b02406 ↗
42. Oblique electrostatic inkjet-deposited TiO2 electron transport layers for efficient planar perovskite solar cells10.1038/s41598-019-56164-w ↗
43. Control of crystal growth toward scalable fabrication of perovskite solar cells
44. Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications10.1039/C8CS00656C ↗
45. Regulating surface defects to achieve more positive light soaking effect in perovskite solar cells10.1021/acsami.3c16908 ↗
46. Recombination in perovskite solar cells: significance of grain boundaries, interface traps, and defect ions10.1021/acsenergylett.7b00236 ↗
47. Effect of density of surface defects on photoluminescence properties in MAPbI3 perovskite films10.1039/C8TC05998E ↗
48. Amphoteric imidazole doping induced large-grained perovskite with reduced defect density for high performance inverted solar cells10.1016/j.solmat.2020.110553 ↗
49. Enhanced efficiency of planar perovskite solar cells via a two-step deposition using DMF as an additive to optimize the crystal growth behavior10.1039/C7TA01517H ↗
50. Analytical modeling and numerical investigation of grain size effects on polycrystalline perovskite based thin-film solar cells: performance insights and implications10.1016/j.solener.2025.113313 ↗
51. Enhanced long-term stability of perovskite solar cells by 3-hydroxypyridine dipping10.1039/C6CC09492A ↗
52. Enhancing the humidity resistance of perovskite photovoltaics: comprehensive PbI2 management utilizing long-chain ionic liquid10.1016/j.nanoen.2025.110716 ↗
53. Reevaluation of photoluminescence intensity as an indicator of efficiency in perovskite solar cells10.1002/solr.202200049 ↗
54. Phenylhydrazinium iodide for surface passivation and defects suppression in perovskite solar cell10.1002/adfm.202000778 ↗
55. Impedance spectroscopy analysis of perovskite solar cell stability10.3390/en16134951 ↗
56. MgO nanoparticle modified anode for highly efficient SnO2-Based planar perovskite solar cells10.1002/advs.201700031 ↗
57. High-performance photodiode-type photodetectors based on polycrystalline formamidinium lead iodide perovskite thin films
58. Jena · 2016 · 255
59. Scaling behavior of moisture-induced grain degradation in polycrystalline hybrid perovskite thin films10.1039/C6EE02941H ↗
60. Trapped charge-driven degradation of perovskite solar cells10.1038/ncomms13422 ↗
61. The role of grain boundaries in organic–inorganic hybrid perovskite solar cells and its current enhancement strategies: a review10.1002/eem2.12696 ↗
62. The role of grain boundaries in perovskite solar cells, mater