journal article·2026-01Open access

Early degradation of silicon heterojunction PV modules installed on horizontal single-axis trackers in desert climate

A.A. Abdallah, M. Kivambe, M. Abdelrahim, M. Elgaili, A. Ahmed, K. Mroue, O. Stroyuk, O. Mashkov, I.M. Peters, C. Buerhop-Lutz

Abstract

We present our latest findings on the early degradation of photovoltaic (PV) silicon heterojunction (HJT) modules installed in harsh desert climates for about two and half years. The results are compared with the benchmark modules with monofacial and bifacial passivated emitter rear contact (PERC) and passivated emitter rear totally diffused (PERT) technologies installed on a horizontal single-axis tracker (HSAT). These findings showed an early degradation of 62 % of the inspected PV modules induced by their field exposure to a desert climate. Ultraviolet fluorescence (UVF) imaging showed signatures of early degradation of encapsulant materials, while near-infrared absorption spectroscopy (NIRA) identified PV module materials in the field. We found evidence of the use of different encapsulant materials and different variants of the same encapsulant materials by the module manufacturer. In contrast to the PERC PV modules with thermoplastic polyolefin (TPO) and polyolefin elastomer (POE) encapsulants, HJT modules with TPO encapsulants showed distinct UVF patterns indicating early degradation. Similarly, all the HJT PV modules with POE and ethylene vinyl acetate (EVA) encapsulant showed UVF degradation patterns. The PERC-2 PV modules exhibited UVF degradation patterns as well but with no significant change in the maximum power P max . While the P max of the HJT-1, HJT-2a, and HJT-2b dropped by −5.9 %, −3.0 %, and −7.3 %, respectively. The study showed that harsh desert climate induces early encapsulant aging, particularly, glass-glass modules showing the importance of encapsulant material selection.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques · Photovoltaic Systems and Sustainability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. International Technology Roadmap for Photovoltaics ITRPV fifteenth ed., (n.d.).
2. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
3. Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses10.1038/s41560-021-00805-w ↗
4. Tube‐type plasma‐enhanced atomic layer deposition of aluminum oxide: enabling record lab performance for the industry with demonstrated cell efficiencies >2410.1002/pip.3607 ↗
5. Buyer aware: three new failure modes in TOPCon modules absent from PERC technology10.1016/j.solmat.2024.112877 ↗
6. Four failure modes in silicon heterojunction glass-back sheet modules10.1016/j.solmat.2023.112358 ↗
7. Corrosion effects in bifacial crystalline silicon PV modules; interactions between metallization and encapsulation10.1016/j.solmat.2023.112321 ↗
8. Damp heat-induced degradation of silicon heterojunction solar cells with Cu-plated contacts10.1109/JPHOTOV.2019.2941693 ↗
9. IEA PVPS Task 13 Report, (n.d.).
10. Properties and degradation behaviour of polyolefin encapsulants for photovoltaic modules10.1002/pip.3323 ↗
11. Enhancing the reliability of TOPCon technology by laser-enhanced contact firing10.1016/j.solmat.2024.112846 ↗
12. Accelerated damp-heat testing at the cell-level of bifacial silicon HJT, PERC and TOPCon solar cells using sodium chloride10.1016/j.solmat.2023.112554 ↗
13. Effects of SiOx barrier layer prepared by plasma-enhanced chemical vapor deposition on improvement of long-term reliability and production cost for Cu-plated amorphous Si/crystalline Si heterojunction solar cells10.1016/j.solmat.2016.12.029 ↗
14. A reliability study of silicon heterojunction photovoltaic modules exposed to damp heat testing10.1016/j.mee.2019.111081 ↗
15. Comparative investigation and analysis of encapsulant degradation and glass abrasion in desert exposed photovoltaic modules
16. UV-fluorescence imaging of silicon PV modules after outdoor aging and accelerated stress testing
17. Global techno-economic performance of bifacial and tracking photovoltaic systems10.1016/j.joule.2020.05.005 ↗
18. Dittmann · 2019