journal article·2025-06Open access

Recoverable degradation of FAPbBr3 perovskite solar cells under reverse-bias: A combined electro-optical investigation

Noah Tormena, Alessandro Caria, Matteo Buffolo, Carlo De Santi, Andrea Cester, Gaudenzio Meneghesso, Enrico Zanoni, Fabio Matteocci, Aldo Di Carlo, Nicola Trivellin, Matteo Meneghini

Abstract

Reverse-bias stability in PV devices is critical to guarantee adequate reliability during sporadic shading instances or when deliberately applying reverse-bias in photodetection applications. Testing reverse-bias stability on PSCs is crucial in providing characterizing insights both into the current state and performance of such devices and also towards their iterative improvement. This paper describes reverse-bias stability testing of semi-transparent FAPbBr 3 perovskite solar cells. Stability against reverse-bias was extensively evaluated through both reverse-bias step-stress (RBSS) tests and constant-bias stress (CBS) tests at different voltage bias intensities. During a series of 10 ks tests, cells were revealed to be stable when operated down to −1.5 V (corresponding to approximately 20 % of the breakdown voltage threshold), whereas at −3 V the observed degradation mainly consists in a decrease in open-circuit voltage (from ∼1.5 ÷ 1.6 V to as low as 0.3 V) and parallel resistance (from ∼10 8 Ω to as low as ∼10 2 Ω), occurring after ∼100 s; a complete recovery is observed, if cells are left in resting conditions after removing the reverse-bias. The observed degradation is ascribed to a temporary shunt-like mechanism, triggered by ion and vacancy displacement and relocation, which causes a drastic energy-band distortion and internal potential compensation. Additional open-circuit voltage decay (OCVD) testing before and after stress reinforces this hypothesis. Reverse-bias step-stress testing until failure confirms that the mechanism occurs across the whole cell, leading to reverse-current magnitudes of over 300 mA/cm 2 . • Reverse-bias on Perovskite Solar Cells can cause temporary/reversible degradation. • Degradation is caused by ionic dynamics and mainly affects open-circuit voltage. • Reverse-bias intensity and duration determine degradation occurrence and extent. • Degradation is non-localized, affecting the entire surface area of the cell. • Recovery occurs by leaving the cell in dark and open-circuit conditions.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Perovskite Materials and Applications · Solid-state spectroscopy and crystallography · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Radiation and nanoparticle interaction for enhanced light absorption and heat conversion10.1016/j.molliq.2024.125702 ↗
2. Optically functional bio-based phase change material nanocapsules for highly efficient conversion of sunlight to heat and thermal storage10.1016/j.energy.2024.132290 ↗
3. The emergence of perovskite solar cells10.1038/nphoton.2014.134 ↗
4. High-efficiency perovskite solar cells10.1021/acs.chemrev.0c00107 ↗
5. Flexible perovskite solar cells10.1016/j.joule.2019.07.023 ↗
6. (Frank) recent advances in flexible perovskite solar cells: fabrication and applications10.1002/anie.201809781 ↗
7. Semitransparent perovskite solar cells: from materials and devices to applications10.1002/adma.201806474 ↗
8. Review of technological design options for building integrated photovoltaics (BIPV)10.1016/j.enbuild.2020.110381 ↗
9. Perovskite solar cells for bipv application: a review10.3390/buildings10070129 ↗
10. Metal halide perovskite tandem and multiple-junction photovoltaics10.1038/s41570-017-0095 ↗
11. A review of research on agrivoltaic systems10.1016/j.rser.2022.112351 ↗
12. Promises and challenges of perovskite solar cells10.1126/science.aam6323 ↗
13. Challenges for commercializing perovskite solar cells
14. A review of perovskites solar cell stability
15. Stability of perovskite solar cells: degradation mechanisms and remedies10.3389/felec.2021.712785 ↗
16. Perovskite solar cells in the shadow: understanding the mechanism of reverse‐bias behavior toward suppressed reverse‐bias breakdown and reverse‐bias induced degradation
17. Metal halide perovskites for X-ray detection and imaging10.1016/j.matt.2020.11.015 ↗
18. Photovoltaic hot spot analysis for cells with various reverse-bias characteristics through electrical and thermal simulation
19. Ion migration in organic–inorganic hybrid perovskite solar cells: current understanding and perspectives
20. Effects of ion migration and improvement strategies for the operational stability of perovskite solar cells10.1039/D0CP04418K ↗
21. Lateral ion migration accelerates degradation in halide perovskite devices10.1039/D2EE02330J ↗
22. Evolution of defects during the degradation of metal halide perovskite solar cells under reverse bias and illumination10.1038/s41560-021-00949-9 ↗
23. Stability of perovskite thin films under working condition: bias‐dependent degradation and grain boundary effects10.1002/adfm.202103894 ↗
24. Incorporating electrochemical halide oxidation into drift-diffusion models to explain performance losses in perovskite solar cells under prolonged reverse bias10.1002/aenm.202002614 ↗
25. Instability of p–i–n perovskite solar cells under reverse bias10.1039/C9TA12032G ↗
26. Improved reverse bias stability in p–i–n perovskite solar cells with optimized hole transport materials and less reactive electrodes10.1038/s41560-024-01600-z ↗
27. Double layer composite electrode strategy for efficient perovskite solar cells with excellent reverse-bias stability10.1007/s40820-022-00985-4 ↗
28. Mobile iodides capture for highly photolysis- and reverse-bias-stable perovskite solar cells10.1038/s41563-024-01876-2 ↗
29. Inhibition of ion migration for reliable operation of organolead halide perovskite‐based metal/semiconductor/metal broadband photodetectors10.1002/adfm.201600405 ↗
30. Methods for passivating defects of perovskite for inverted perovskite solar cells and modules
31. International Electrotechnical Commission (IEC) Standard 60904-7:2019, Edition 4.0, “Photovoltaic Devices - Part 7: Computation of the Spectral Mismatch Correction for Measurements of Photovoltaic Devices”, 2019, pp. 6–7.
32. Origin of hysteresis in perovskite solar cells
33. Unraveling the intrinsic color of chlorophyll10.1002/anie.201410899 ↗
34. Best practices in perovskite solar cell efficiency measurements. Avoiding the error of making bad cells look good10.1021/acs.jpclett.5b00289 ↗
35. Slow dynamic processes in lead halide perovskite solar cells. Characteristic times and hysteresis10.1021/jz5011187 ↗
36. S-shaped current–voltage characteristics in solar cells: a review10.1109/JPHOTOV.2019.2930409 ↗
37. Reverse bias behavior of halide perovskite solar cells10.1002/aenm.201702365 ↗
38. Hysteresis analysis based on the ferroelectric effect in hybrid perovskite solar cells10.1021/jz502111u ↗
39. Ion migration in organometal trihalide perovskite and its impact on photovoltaic efficiency and stability10.1021/acs.accounts.5b00420 ↗
40. On the current–voltage hysteresis in perovskite solar cells: dependence on perovskite composition and methods to remove hysteresis10.1002/adma.201805214 ↗
41. Trap-limited charge recombination in intrinsic perovskite film and meso-superstructured perovskite solar cells and the passivation effect of the hole-transport material on trap states10.1039/C5CP04360C ↗
42. Coupled ionic-electronic equivalent circuit to describe asymmetric rise and decay of photovoltage profile in perovskite solar cells10.1038/s41598-019-48505-6 ↗
43. Ion migration in halide perovskite solar cells: mechanism, characterization, impact and suppression10.1016/j.jechem.2021.08.006 ↗
44. Ionic mobility and charge carriers recombination analyzed in triple cation perovskite solar cells10.3390/coatings13101673 ↗
45. Migration of cations induces reversible performance losses over day/night cycling in perovskite solar cells10.1039/C6EE03352K ↗
46. Silicon/perovskite tandem solar cells with reverse bias stability down to −40 V. Unveiling the role of electrical and optical design10.1002/advs.202401175 ↗