journal article·2025-06Open access

Interconnection of low-temperature metallization on silicon solar cells - The role of silver in tin-bismuth-based solder alloys

Derya Güldali, Angela De Rose, Max Mittag, Benjamin Grübel, Holger Neuhaus, Ulrich Tetzlaff

Abstract

This study investigates the potential of tin-bismuth (SnBi) alloys micro-alloyed with silver (Ag) to enhance low-temperature (LT) soldering for photovoltaic (PV) modules. The primary focus is on addressing challenges such as intermetallic compound (IMC) formation, which can compromise mechanical strength and durability under thermal cycling, thereby improving the long-term stability of solder joints. A systematic investigation of the influence of the Ag amount is being conducted with the intention to find the optimal alloy composition for SnBi solder joints on LT metallization contacts. The objective is to provide a cost-effective, lead-free alternative for the interconnection of temperature-sensitive solar cells like silicon heterojunction (SHJ) cells. The findings illustrate that the addition of 0.4 % wt. Ag notably enhances the wettability and initial mechanical strength of the solder. An increase in the Ag content to 1.0 % wt. results in an excessive growth of IMC, which in turn leads to increased brittleness and potential long-term stability issues of the solder joint. Thermal cycling tests demonstrate that modules soldered with SnBiAg0.4 exhibited less than -5 % loss in power. This composition represents an optimal balance between performance and cost. These findings show the potential of SnBiAg0.4 as a suitable solder alloy regarding long-term stability and electrical performance for interconnection of LT metallization contacts of solar cells in PV module manufacturing. • Investigates silver additions in SnBi solder to enhance low-temperature PV module reliability. • Demonstrates 0.4 % silver improves wettability and solder joint performance under stress. • Addresses intermetallic compound growth and Bi agglomeration under thermal cycling. • Proposes a cost-effective, lead-free solder for silicon heterojunction solar cells.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Semiconductor materials and interfaces · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. 2023
2. Evaluation of bismuth-based solder alloys for low-stress interconnection of industrial crystalline silicon PV cells
3. Material joint analysis of lead-free interconnection technologies for silicon photovoltaics10.1109/ISSE54558.2022.9812798 ↗
4. Possibilities and limits of bismuth solders
5. Influence of annealing on performance for hetero-junction a-Si/c-Si devices
6. Photovoltaic module performance and durability following long-term field exposure10.1002/(SICI)1099-159X(200003/04)8:2<241::AID-PIP290>3.0.CO;2-D ↗
7. Solder joint reliability
8. Intermetallic phase growth and reliability of Sn-Ag-soldered solar cell joints10.1016/j.egypro.2012.07.126 ↗
9. Interface reaction and intermetallic compound growth behavior of Sn-Ag-Cu lead-free solder joints on different substrates in electronic packaging10.1007/s10853-018-2907-y ↗
10. Effect of durability testing on solder joint adhesion and failure mode of front side metallizations
11. Intermetallic phase growth and reliability of Sn-Ag-soldered solar cell joints10.1016/j.egypro.2012.07.126 ↗
12. Field failure mechanism study of solder interconnection for crystalline silicon photovoltaic module10.1016/j.microrel.2012.06.027 ↗
13. Intermetallic compounds in solar cell interconnections: microstructure and growth kinetics10.1016/j.solmat.2016.08.039 ↗
14. Güldali
15. A comprehensive study of intermetallic compounds in solar cell interconnections and their growth kinetics10.1016/j.egypro.2016.10.084 ↗
16. Recent advances on SnBi low-temperature solder for electronic interconnections10.1007/s10854-021-06820-7 ↗
17. Faes · 2014
18. Progress in shingle interconnection based on electrically conductive adhesives at Fraunhofer ISE10.1063/5.0127455 ↗
19. Low-temperature metallization & interconnection for silicon heterojunction and perovskite silicon tandem solar cells10.1016/j.solmat.2023.112515 ↗
20. Interconnection of silicon heterojunction solar cells by infrared soldering - solder joint analysis and temperature study
21. Comparison of NiV and polymer paste metallization as low temperature interconnection of high efficiency heterojunction solar cells
22. Low-temperature soldering for the interconnection of silicon heterojunction solar cells
23. Challenges for the interconnection of crystalline silicon heterojunction solar cells
24. 2007
25. 2006
26. Eutectic Sn-Bi as an alternative to Pb-free solders
27. Roadmap for lead-free soldering
28. Lead-free solders in microelectronics10.1016/S0927-796X(00)00010-3 ↗
29. Advances in lead-free electronics soldering10.1016/S1359-0286(00)00036-X ↗
30. Influences of Ag and in alloying on microstructure and mechanical properties of Sn-58Bi solder10.1007/s11664-020-08595-9 ↗
31. Influences of Ag and in alloying on Sn-Bi eutectic solder and SnBi/Cu solder joints10.1007/s10854-019-02206-y ↗
32. Ribas · 2017
33. Influences of Ag addition to Sn-58Bi solder on SnBi/Cu interfacial reaction10.1016/j.matlet.2017.11.127 ↗
34. Low melting temperature Sn-Bi solder: effect of alloying and nanoparticle addition on the microstructural, thermal, interfacial bonding, and mechanical characteristics10.3390/met11020364 ↗
35. Contact angle and wetting properties10.1007/978-3-642-34243-1_1 ↗
36. 2008
37. 2007
38. N. Bowler, "Four-point Potential Drop Measurements for Materials Characterization," in p. 12001.
39. Analysis of electrical properties using the four point probe method10.1051/e3sconf/20187313019 ↗
40. Lovato Franco · 2024
41. 2016
42. Photovoltaic devices: Part 3: measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
43. Effects of Ag on the microstructure and shear strength of rapidly solidified Sn–58Bi solder10.1007/s10854-019-00981-2 ↗
44. Correlation between microhardness and microstructure of low-temperature Sn-xBi-M(Ag, Sb) solders10.1016/j.jmrt.2024.06.063 ↗
45. Borg · 1988
46. Printing technologies for silicon solar cell metallization: a comprehensive review10.1002/pip.3674 ↗
47. Low‐temperature‐processed stable perovskite solar cells and modules: a comprehensive review10.1002/aenm.202103534 ↗
48. Electrical transport properties of Ag3Sn compound10.1016/j.ssc.2011.06.031 ↗
49. Economic feasibility of bifacial silicon solar cells10.1002/pip.2730 ↗
50. Techno-ökonomische Bewertung neuer Produktionstechnologien entlang der Photovoltaik-Wertschöpfungskette.: Modell zur Analyse der Total Cost of Ownership von Photovoltaik-Technologien
51. Cost modelling of silicon solar cell production innovation along the PV value chain
52. 2023