journal article·2023-09

Study on the influence of micro-alkali texturing and micro-alkali polishing process on the passivation and contact performance of n-TOPCon solar cells

Chunlin Guo, Rui Jia, Xiaorang Tian, Jiawang Chen, Jiwu Zhu, Huiwei Huang, Zhaobin Liu, Chun Xu, Xing Li

Publisher page

Abstract

The matching between the morphology of the backside of n-TOPCon solar cells and the tunnel oxide/n + polysilicon structure is the key to achieving high efficiency. In this work, based on the requirement of edge isolation, micro-alkali polishing and micro-alkali texturing were performed on the acid-polishing back surface. Their effects on surface morphology, passivation effect, contact resistance, and photoelectric conversion efficiency were investigated. Adding a short-time micro-alkali texturing process after acid polishing can form a surface morphology with both regional polishing and local microtexture. This can improve the contact characteristics without significantly affecting the passivation characteristics, enabling solar cells to achieve higher FF (83.30%) and average efficiency (24.15%). Compared with the acid polishing sample, the efficiency of the micro-alkali texturing sample is increased by 0.12%. The deterioration of ohmic contact caused by alkali polishing has not been eliminated by optimizing the reaction process of alkali polishing. The study of different surface morphologies-modified samples under different tunnel oxide layer growth time, also reveals the difference in the influence of tunnel oxide layer characteristics on samples with different morphologies. The acid-polishing samples show more stable FF and conversion efficiency at different thermal oxidation time, and the micro-alkali texturing samples have a significant FF advantage at shorter thermal oxidation time. These studies can be applied and validated in the photovoltaic industry.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
2. Tunnel oxide passivated contacts as an alternative to partial rear contacts10.1016/j.solmat.2014.06.015 ↗
3. Efficient carrier-selective p- and n-contacts for Si solar cells10.1016/j.solmat.2014.05.039 ↗
4. Passivating contacts for crystalline silicon solar cells: from concepts and materials to prospects10.1109/JPHOTOV.2018.2797106 ↗
5. Surface passivation of crystalline silicon solar cells: present and future10.1016/j.solmat.2018.06.047 ↗
6. Passivating contacts for crystalline silicon solar cells10.1038/s41560-019-0463-6 ↗
7. Excellent surface passivation quality on crystalline silicon using industrial-scale direct-plasma TOPCon deposition technology10.1002/solr.201800068 ↗
8. Screen-printed n-type industry solar cells with tunnel oxide passivated contact doped by phosphorus diffusion
9. Phosphorus-doped polycrystalline silicon passivating contacts via spin-on doping
10. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
11. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
12. Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses10.1038/s41560-021-00805-w ↗
13. Mass production of industrial tunnel oxide passivated contacts (i‐TOPCon) silicon solar cells with average efficiency over 23% and modules over 345 W10.1002/pip.3180 ↗
14. Industrial TOPCon solar cells on n-type quasi-mono Si wafers with efficiencies above 23%
15. 24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design
16. TOPCon – technology options for cost efficient industrial manufacturing
17. Comprehensive analysis of advanced solar cell contacts consisting of printed fine-line seed layers thickened by silver plating10.1002/pip.855 ↗
18. Effects of surface morphology on Ag crystallite formation in screen-printed multi-crystalline Si solar cells10.1016/j.mssp.2021.105759 ↗
19. Influence of silicon substrate surface finish on the screen‐printed silver metallization of polysilicon‐based passivating contacts
20. Experimental evidence of direct contact formation for the current transport in silver thick film metallized silicon emitters10.1063/1.3665718 ↗
21. Microstructural comparison of silicon solar cells' front-side Ag contact and the evolution of current conduction mechanisms10.1063/1.3642956 ↗
22. Role of phosphorus in contact formation on silicon solar cells10.1002/pssr.201206298 ↗
23. Influence of SiOx film thickness on electrical performance and efficiency of TOPCon solar cells
24. Study on the interfacial oxide in passivating contacts
25. Effect of silicon oxide thickness on polysilicon based passivated contacts for high-efficiency crystalline silicon solar cells10.1016/j.solmat.2018.05.011 ↗
26. Understanding the charge transport mechanisms through ultrathin SiOx layers in passivated contacts for high-efficiency silicon solar cells10.1063/1.5081832 ↗
27. Effect of crystallographic orientation and nanoscale surface morphology on poly-Si/SiOx contacts for silicon solar cells10.1021/acsami.9b11889 ↗
28. Modifications of textured silicon surface morphology and its effect on poly-Si/SiOx contact passivation for silicon solar cells10.1109/JPHOTOV.2019.2937230 ↗
29. Effect of surface texture on pinhole formation in SiOx-based passivated contacts for high-performance silicon solar cells10.1021/acsami.0c12795 ↗
30. Integration of inline single-side wet emitter etch in PERC cell manufacturing10.1016/j.egypro.2012.07.120 ↗
31. Porous silicon/NaOH texturization surface treatment of crystalline silicon for solar cells10.1016/j.solener.2013.04.026 ↗
32. Wet chemical polishing for industrial type PERC solar cells10.1016/j.egypro.2013.07.273 ↗
33. Influence of rear surface pyramid base microstructure on industrial n-TOPCon solar cell performances10.1016/j.solener.2022.10.017 ↗
34. Large-area bifacial n-TOPCon solar cells with in situ phosphorus-doped LPCVD poly-Si passivating contacts
35. In situ phosphorus-doped polycrystalline silicon films by low pressure chemical vapor deposition for contact passivation of silicon solar cells10.1016/j.solener.2021.11.045 ↗
36. Fabrication of inverted pyramid structure for high-efficiency silicon solar cells using metal assisted chemical etching method with CuSO4 etchant
37. A novel additive for rapid and uniform texturing on high-efficiency monocrystalline silicon solar cells
38. Texture engineering of mono-crystalline silicon via alcohol-free alkali solution for efficient PERC solar cells10.1016/j.jechem.2022.03.016 ↗
39. Study on the cleaning process of n+-poly-Si wraparound removal of TOPCon solar cells10.1016/j.solener.2020.09.028 ↗
40. The impacts of LPCVD wrap-around on the performance of n-type tunnel oxide passivated contact c-Si solar cell10.1016/j.cap.2020.03.021 ↗
41. Recombination at metal-emitter interfaces of front contact technologies for highly efficient silicon solar cells10.1016/j.egypro.2011.06.111 ↗
42. Detailed investigation of TLM contact resistance measurements on crystalline silicon solar cells10.1016/j.solener.2017.05.015 ↗
43. Progress with passivation and screen-printed metallization of Boron-doped monoPoly™ layers10.1016/j.solener.2021.11.015 ↗
44. Development of thin polysilicon layers for application in monoPoly™ cells with screen-printed and fired metallization
45. Optoelectrical properties of high-performance low-pressure chemical vapor deposited phosphorus-doped polysilicon layers for passivating contact solar cells
46. Study of the properties of SiOx layers prepared by different techniques for rear side passivation in TOPCon solar cells10.1016/j.mssp.2020.105163 ↗
47. Temperature-induced stoichiometric changes in thermally grown interfacial oxide in tunnel-oxide passivating contacts
48. Janssen · 2018
49. Parameterization of free carrier absorption in highly doped silicon for solar cells10.1109/TED.2013.2262526 ↗
50. Near-infrared free carrier absorption in heavily doped silicon10.1063/1.4893176 ↗
51. n-Type polysilicon passivating contact for industrial bifacial n-type solar cells10.1016/j.solmat.2016.06.034 ↗
52. Characterization of absorption losses in rear side n-type polycrystalline silicon passivating contacts
53. Parasitic photon process versus productive photon process: a theoretical study of free-carrier absorption in conventional and hot-carrier solar cells10.1088/1361-6463/abb1e6 ↗