journal article·2025-05

Damage-free sputtering of a transparent conductive oxide using a triode plasma configuration

Jeong-Ho An, Ji-Eun Hong, Sung-In Mo, Yimhyun Jo, Sinho Choi, Tae-Hee Kim, Soong Ju Oh, Kyung Taek Jeong, Hee-eun Song, Joon-Ho Oh, Ka-Hyun Kim

Publisher page

Abstract

Transparent conductive oxides (TCOs) are crucial in modern electronics, including displays, smart windows, antistatic coatings, and optoelectronic devices. Their simultaneous transparency and electrical conductivity make them especially useful in solar cells. TCOs are deposited using conventional diode-configured magnetron sputtering, which often leads to sputter damage and degrades the surface passivation of silicon heterojunction solar cells. The bombardment of highly energetic O − ions induces sputter damage, which can be partially recovered by thermal annealing but is partially irreversible. To mitigate this irreversible damage, we propose a triode plasma configuration incorporating a mesh electrode into the conventional diode-configured magnetron sputtering reactor. In contrast with the conventional diode-configured magnetron sputtering of Sn-doped indium oxide (ITO), triode-configured ITO sputtering with the negatively biased mesh electrode successfully alleviates the effect of O − ion bombardment, minimizing sputter damage. The benefits of negatively biased mesh electrode are confirmed through the material properties of the as-deposited ITO films, which exhibit higher carrier mobilities, higher refractive indices, and lower extinction coefficients than conventional diode-deposited films. Additionally, mitigating the effect of O − ion bombardment changes the preferred orientation of the ITO films from the (400) plane to (222). Because the triode configuration is compatible with conventional magnetron sputtering, it can also be applied in diverse electronics technologies, including optoelectronic devices.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Thin-Film Transistor Technologies · Ion-surface interactions and analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Characterization of physical and mechanical properties of Al2O3-doped ZnO (AZO) thin films deposited on transparent polyimide supports with various ALD process parameters10.1016/j.apsusc.2020.147731 ↗
2. Preparation of low-resistance and residue-free ITO films for large-scale 3D displays10.1021/acsami.9b16782 ↗
3. Highly conductive and transparent ITO films deposited at low temperatures by pulsed DC magnetron sputtering from ceramic and metallic rotary targets10.1016/j.surfcoat.2016.09.022 ↗
4. Flexible electrochromic and thermochromic hybrid smart window based on a highly durable ITO/graphene transparent electrode10.1016/j.cej.2021.129028 ↗
5. Structural and optoelectrical properties of Nb-TiO2 films fabricated by low-energy magnetron sputtering and post-annealing10.1016/j.surfcoat.2018.05.092 ↗
6. Synthesis of antistatic hybrid nanocomposite coatings using surface modified indium tin oxide (ITO) nanoparticles10.1007/s11998-013-9555-6 ↗
7. Optimal of black anti-static AZO/Al2O3-SiO2-VxOy coatings for spacecraft stray light on high silicon aluminum alloys10.1016/j.cap.2023.06.006 ↗
8. Highly conductive and flexible transparent hybrid superlattices with gas-barrier properties: implications in optoelectronics10.1016/j.apsusc.2024.159850 ↗
9. High-concentration F-incorporated ZnO thin films doped via femtosecond-laser hyperdoping
10. Nano-patterned dual-layer ITO electrode of high brightness blue light emitting diodes using maskless wet etching10.1364/OE.21.00A970 ↗
11. All-metal oxide transparent photodetector for broad responses10.1016/j.sna.2020.111835 ↗
12. One-step synthesis of porous transparent conductive oxides by hierarchical self-assembly of aluminum-doped ZnO nanoparticles10.1021/acsami.9b19423 ↗
13. A silicon carbide-based highly transparent passivating contact for crystalline silicon solar cells approaching efficiencies of 24%10.1038/s41560-021-00806-9 ↗
14. Fully bottom-up waste-free growth of ultrathin silicon wafer via self-releasing seed layer
15. Silicon–hydrogen bonding configuration modified by layer stacking sequence in silicon heterojunction solar cells10.1021/acsaem.2c02668 ↗
16. Status and perspectives of transparent conductive oxide films for silicon heterojunction solar cells
17. Sputtered transparent electrodes for optoelectronic devices: induced damage and mitigation strategies10.1016/j.matt.2021.09.021 ↗
18. Enhancing the selectivity and transparency of the electron contact in silicon heterojunction solar cells by phosphorus catalytic doping10.1002/adfm.202310552 ↗
19. Effect of front TCO on the performance of rear-junction silicon heterojunction solar cells: insights from simulations and experiments10.1016/j.solmat.2019.01.047 ↗
20. Livingston · 1999 · 31
21. Damage at hydrogenated amorphous/crystalline silicon interfaces by indium tin oxide overlayer sputtering10.1063/1.4764529 ↗
22. Silicon heterojunction solar cells with up to 26.81% efficiency achieved by electrically optimized nanocrystalline-silicon hole contact layers10.1038/s41560-023-01255-2 ↗
23. Strategies for realizing high-efficiency silicon heterojunction solar cells10.1016/j.solmat.2023.112413 ↗
24. Damage to passivation contact in silicon heterojunction solar cells by ITO sputtering under various plasma excitation modes10.1016/j.solmat.2018.12.001 ↗
25. Transparent conductive oxide sputtering damage on contact passivation in silicon heterojunction solar cells with hydrogenated nanocrystalline silicon10.1002/solr.202200651 ↗
26. Reactive magnetron sputtering of transparent conductive oxide thin films: role of energetic particle (ion) bombardment10.1557/jmr.2011.428 ↗
27. In situ analyses on negative ions in the indium-gallium-zinc oxide sputtering process10.1063/1.4812668 ↗
28. Improvement of the homogeneity of high mobility In2O3:H films by sputtering through a mesh electrode studied by Monte Carlo simulation and thin film analysis10.1002/pssa.201532819 ↗
29. Impact of deposition of indium tin oxide double layers on hydrogenated amorphous silicon/crystalline silicon heterojunction10.1063/5.0009994 ↗
30. Reducing sputter damage-induced recombination losses during deposition of the transparent front-electrode for monolithic perovskite/silicon tandem solar cells10.1016/j.solmat.2023.112180 ↗
31. Effect of oxygen and hydrogen flow ratio on indium tin oxide films in rear-junction silicon heterojunction solar cells10.1016/j.solener.2021.12.007 ↗
32. The sputter deposition of broadband transparent and highly conductive cerium and hydrogen co-doped indium oxide and its transfer to silicon heterojunction solar cells10.1002/pip.3388 ↗
33. Reducing sputter induced stress and damage for efficient perovskite/silicon tandem solar cells10.1039/D1TA09143C ↗
34. Innovative wide-spectrum Mg and Ga-codoped ZnO transparent conductive films grown via reactive plasma deposition for Si heterojunction solar cells10.1021/acsaem.9b02064 ↗
35. Plasma damage-free deposition of transparent Sn-doped In2O3 top cathode using isolated plasma soft deposition for perovskite solar cells10.1016/j.nanoen.2023.108431 ↗
36. The capital intensity of photovoltaics manufacturing: barrier to scale and opportunity for innovation10.1039/C5EE01509J ↗
37. Silicon heterojunction solar cells: techno-economic assessment and opportunities10.1016/j.joule.2022.02.009 ↗
38. High aspect ratio silicon ring-shape micropillars fabricated by deep reactive ion etching with sacrificial structures10.1016/j.mne.2023.100234 ↗
39. Progress in nanoscale dry processes for fabrication of high-aspect-ratio features: how can we control critical dimension uniformity at the bottom?10.7567/JJAP.57.06JA01 ↗
40. Faraday cage angled-etching of nanostructures in bulk dielectrics10.1116/1.4944854 ↗
41. The evolution of silicon wafer cleaning technology10.1149/1.2086825 ↗
42. Dynamics of plasma-assisted epitaxial silicon growth driven by a hydrogen-incorporated nanostructure for novel applications10.1002/sstr.202300218 ↗
43. Design rule of electron- and hole-selective contacts for polycrystalline silicon-based passivating contact solar cells10.1021/acsami.3c08957 ↗
44. Effects of carrier concentration on the dielectric function of ZnO:Ga and In2O3:Sn studied by spectroscopic ellipsometry: analysis of free-carrier and band-edge absorption10.1103/PhysRevB.71.075109 ↗
45. Optimum electrical and optical properties of transparent conducting oxide for Cu(In,Ga)Se2 photovoltaic module applications10.1002/pssa.202300641 ↗
46. Ohring · 2002 · 147
47. Negative ions in reactive magnetron sputtering: detecting the cause of damages in sensitive TCO films with energy resolved mass spectrometry10.1002/vipr.201300518 ↗
48. Impact of plasma electron flux on plasma damage-free sputtering of ultrathin tin-doped indium oxide contact layer on p-GaN for InGaN/GaN light-emitting diodes10.1002/advs.201700637 ↗
49. Effect of plasma induced surface damages on the organic thin films by using metal mesh10.1149/2.0051610jss ↗
50. Deeper insight into the mechanisms behind sputter damage in silicon solar cells based on the example of nanocrystalline silicon carbide10.1002/apxr.202400036 ↗
51. Study on crystallinity of tin-doped indium oxide films deposited by DC magnetron sputtering10.1143/JJAP.37.1870 ↗
52. Comparative study on the thickness-dependent properties of ITO and GZO thin films grown on glass and PET substrates10.3938/jkps.61.1467 ↗
53. The physical properties of Al-doped zinc oxide films prepared by RF magnetron sputtering10.1016/S0040-6090(97)00215-0 ↗
54. Spectroscopic ellipsometry characterization of indium tin oxide film microstructure and optical constants10.1016/S0040-6090(97)00853-5 ↗
55. Relationship between density and refractive index of inorganic solids10.1088/0022-3727/20/4/019 ↗
56. Spectroscopic ellipsometry study of the optoelectrical properties of In2O3:Sn–ZnO:Al thin films deposited through alternating sputtering10.2109/jcersj2.15242 ↗
57. Comparison of methods to determine bandgaps of ultrathin HfO2 films using spectroscopic ellipsometry10.1116/1.3597838 ↗
58. Properties of indium tin oxide thin films grown by Ar ion beam sputter deposition10.1116/6.0000917 ↗
59. Influences of sputtering power and substrate temperature on the properties of RF magnetron sputtered indium tin oxide thin films10.1143/JJAP.38.3448 ↗
60. Effects of cumulative ion bombardment on ITO films deposited on PET and Si substrates by DC magnetron sputtering10.1364/OME.4.000764 ↗
61. A microstructural study of low resistivity tin-doped indium oxide prepared by d.c. magnetron sputtering10.1016/0040-6090(94)90646-7 ↗
62. ITO films with different preferred orientations prepared by DC magnetron sputtering10.1016/j.optmat.2022.113040 ↗
63. Schubert · 2006 · 83
64. Transparent conducting materials: overview and recent results
65. Transparent conducting indium zinc tin oxide anode for highly efficient phosphorescent organic light emitting diodes10.1149/1.2799745 ↗