journal article·2025-04

High-performance ultra-thin CdTe solar cells with CuxByO back-buffer layer by a low-temperature solution processing

Xin Zhang, Xiutao Yang, Yunpu Tai, Bing Li, Jingquan Zhang, Lianghuan Feng, Xia Hao, Smagul Karazhanov, Komiljon Yakubov, Guanggen Zeng

Publisher page

Abstract

In recent years, the development of building integrated photovoltaics (BIPV) has brought new research hotspots and challenges to ultra-thin cadmium telluride (CdTe) solar cells. In this work, we report the first application of solution-synthesized and air-stable Cu xB yO film for high-performance ultra-thin CdTe solar cells and characterize the properties of materials and devices by SEM, KPFM, TOF-SIMS, J-V, C-V, EQE, etc. The results show that the Cu xB yO layer exhibited a 5.4 eV work function and the carrier concentration of ultra-thin devices exceeded 10 15 cm −3. Finally, the devices with a 0.8 μm CdTe absorber layer achieve a conversion efficiency of 12.79 % with the open-circuit voltage of 810 mV, and a fill factor of 75.5 %, which was the best conversion efficiency for ultra-thin CdTe solar cells with no more than 1 μm absorber layer. Furthermore, we use transparent electrodes instead of Au electrodes to achieve bifacialization, and the bifacial devices with the same thickness of absorber layer obtain an efficiency of 10.27 % under front illumination, and an efficiency of 4.28 % under back illumination. Our approach has demonstrated the Cu xB yO buffer layer by a low-temperature solution processing holds great potential for the advancement of high-performance ultra-thin mono- and bifacial CdTe solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Status and potential of CdTe solar-cell efficiency10.1109/JPHOTOV.2015.2434594 ↗
2. 20%-efficient polycrystalline Cd(Se,Te) thin-film solar cells with compositional gradient near the front junction10.1038/s41467-022-35442-8 ↗
3. Thin-film solar cells with 19% efficiency by thermal evaporation of CdSe and CdTe10.1021/acsenergylett.9b02836 ↗
4. CdTe-based thin film photovoltaics: recent advances, current challenges and future prospects10.1016/j.solmat.2023.112289 ↗
5. Photovoltaic device innovation for a solar future10.1016/j.device.2023.100013 ↗
6. Probing the significance of RF magnetron sputtering conditions on the physical properties of CdS thin films for ultra-thin CdTe photovoltaic applications10.1016/j.apsusc.2021.151640 ↗
7. Towards ultra-thin CdTe solar cells using MOCVD10.1016/j.tsf.2008.10.093 ↗
8. Technical and economic evaluation of thin-film CdTe building-integrated photovoltaics (BIPV) replacing façade and rooftop materials in office buildings in a warm and sunny climate10.1016/j.renene.2017.10.091 ↗
9. High efficiency ultra-thin sputtered CdTe solar cells10.1016/j.solmat.2006.02.029 ↗
10. Highly efficient 1μm thick CdTe solar cells with textured TCOs10.1016/S0927-0248(00)00281-6 ↗
11. Ultrathin CdS/CdTe solar cells by sputtering10.1016/j.solmat.2012.05.035 ↗
12. Ultra-thin bifacial CdTe solar cell10.1016/j.solmat.2007.04.025 ↗
13. Bifacial configurations for CdTe solar cells10.1016/j.solmat.2007.03.010 ↗
14. Nanometer-scale electrical potential imaging on absorber of CdSeTe solar cells10.1016/j.solmat.2023.112465 ↗
15. Enabling bifacial thin film devices by developing a back surface field using CuxAlOy10.1016/j.nanoen.2021.105827 ↗
16. 3D/2D passivation as a secret to success for polycrystalline thin-film solar cells10.1016/j.joule.2021.03.015 ↗
17. Enhanced performance of p-type dye-sensitized solar cells based on ultrasmall Mg-doped CuCrO2 nanocrystals10.1002/cssc.201300265 ↗
18. Remarkable photocurrent of p-type dye-sensitized solar cell achieved by size controlled CuGaO2 nanoplates10.1039/C3TA14072E ↗
19. Band alignment analysis of CuGaO2/β-Ga2O3 heterojunction and application to deep-UV photodetector10.1016/j.apsusc.2021.151010 ↗
20. Enhanced performance of self-powered ultraviolet photodetectors coupled with the photovoltaic-pyroelectric effect based on ZnO/CuBO2 core-shell nanorod arrays10.1016/j.jallcom.2022.165066 ↗
21. Cracked film lithography with CuGaOx buffers for bifacial CdTe photovoltaics10.1002/smll.202301939 ↗
22. Bifacial CdTe solar cells with copper chromium oxide back-buffer layer10.1002/solr.202200501 ↗
23. ZnO/CuCrO2 core–shell nanowire heterostructures for self-powered UV photodetectors with fast response10.1002/adfm.201803142 ↗
24. Hierarchical transparent back contacts for bifacial CdTe PV10.1021/acsenergylett.4c00156 ↗
25. The role of back buffer layers and absorber properties for >25% efficient CdTe solar cells10.1021/acsaem.9b00367 ↗
26. Sputtered p-type CuxZn1-xS back contact to CdTe solar cells10.1021/acsaem.0c00413 ↗
27. Impact of nanoscale Cu (I) precursors prepared by solution process on large-area CdTe solar cells10.1016/j.mssp.2024.108652 ↗
28. Preparation of CuSe nanoparticles by antisolvent process for doping and passivation of absorber layer in CdTe solar cells10.1016/j.nanoen.2024.109810 ↗
29. Impurity doping and compensation mechanisms in CdTe10.1016/S0040-6090(00)01717-X ↗
30. Low-temperature and effective ex situ group V doping for efficient polycrystalline CdSeTe solar cells10.1038/s41560-021-00848-z ↗
31. CuSCN as the back contact for efficient ZMO/CdTe solar cells10.3390/ma13081991 ↗
32. Understanding and advancing bifacial thin film solar cells10.1021/acsaem.0c00851 ↗
33. Oxygen management to avoid photo-inactive Cd(S,Se) for efficient Cd(Se,Te) solar cells10.1021/acsenergylett.3c00141 ↗
34. Effect of back-contact barrier on thin-film CdTe solar cells10.1016/j.tsf.2006.01.004 ↗
35. Strategies to increase CdTe solar-cell voltage10.1016/j.tsf.2006.12.147 ↗
36. Correlative impurity distribution analysis in cadmium telluride (CdTe) thin-film solar cells by ToF-SIMS 2D imaging10.1016/j.solmat.2016.05.019 ↗
37. Maximize CdTe solar cell performance through copper activation engineering10.1016/j.nanoen.2020.104835 ↗
38. Properties of boron doped ZnO films prepared by reactive sputtering method: application to amorphous silicon thin film solar cells10.1016/j.jmst.2019.12.004 ↗
39. Electrical and optical properties of boron doped CdS thin films prepared by chemical bath deposition10.1016/S0040-6090(03)00153-6 ↗
40. Band alignment for rectification and tunneling effects in Al2O3 atomic-layer-deposited on back contact for CdTe solar cell10.1021/acsami.6b07421 ↗
41. Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries10.1038/nphoton.2015.78 ↗
42. Physics and chemistry of CdTe/CdS thin film heterojunction photovoltaic devices: fundamental and critical aspects10.1039/C3EE41981A ↗
43. Imaging hole-density inhomogeneity in arsenic-doped CdTe thin films by scanning capacitance microscopy10.1016/j.solmat.2020.110468 ↗
44. Exceeding 20% efficiency with in situ group V doping in polycrystalline CdTe solar cells10.1038/s41560-019-0446-7 ↗
45. Ultrasensitive photodetectors exploiting electrostatic trapping and percolation transport
46. The impact of charged grain boundaries on thin-film solar cells and characterization10.1063/1.2042530 ↗
47. Tungsten doped indium oxide (IWO) transparent electrode used in air-annealed perovskite solar cells10.1016/j.jallcom.2023.169394 ↗
48. Approach to determining the limiting recombination mechanism in CdTe-based solar cells10.1016/j.solmat.2023.112689 ↗