A holistic approach for a large area (>1 cm2) mechanically stacked two terminal tandem perovskite/silicon heterojunction with efficiencies above 30 %
Source abstract
Abstract
Among the various architectures proposed to produce both four-terminal and two-terminal Perovskite/silicon tandem solar cells, the two-terminal (2T) mechanically stacked tandem configuration combines the simplicity of an independent fabrication and optimization of perovskite and silicon sub cells with a reduced system complexity associated with the 2T architecture. To improve the performance of the 2T mechanically stacked tandem several material and fabrication aspects need to be addressed and combined in a synergetic way. A holistic approach able to improve the photovoltaic performance working on the energy gap tunability, the perovskite thickness and composition, the defect passivation and the device architecture is demonstrated. This technique allows to raise the achievable Power Conversion Efficiency reaching in the best case 31 % (30 % stabilized and 28.32 % on average) on active areas larger than 1 cm2.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Thermal Expansion and Ionic Conductivity · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Organic–inorganic halide perovskites: perspectives for silicon-based tandem solar cells10.1109/JPHOTOV.2014.2355421 ↗
2. Supercharging silicon solar cell performance by means of multijunction concept10.1109/JPHOTOV.2015.2395140 ↗
3. Fraunhofer
4. Solar cell efficiency tables (Version 60)10.1002/pip.3595 ↗
5. Development of the PERC solar cell10.1109/JPHOTOV.2019.2899460 ↗
6. Review—development history of high efficiency silicon heterojunction solar cell: from discovery to practical use10.1149/2162-8777/abdfb6 ↗
7. 7000 high-eficiency cells for a dream10.1002/pip.4670020209 ↗
8. Silicon heterojunction back-contact solar cells by laser patterning10.1038/s41586-024-08110-8 ↗
9. Organometallic halide perovskites: sharp optical absorption edge and its relation to photovoltaic performance10.1021/jz500279b ↗
10. Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells10.1039/c3ee43822h ↗
11. Selecting tandem partners for silicon solar cells10.1038/nenergy.2016.137 ↗
12. Monolithic perovskite tandem solar cells: a review of the present status and advanced characterization methods toward 30% efficiency10.1002/aenm.201904102 ↗
13. Vapor-deposited perovskites: the route to high-performance solar cell production?10.1016/j.joule.2017.07.014 ↗
14. Fully textured monolithic perovskite/silicon tandem solar cells with 25.2% power conversion efficiency10.1038/s41563-018-0115-4 ↗
15. Blade-coated perovskites on textured silicon for 26%-efficient monolithic perovskite/silicon tandem solar cells10.1016/j.joule.2020.01.008 ↗
16. Dual role of Cu‐chalcogenide as hole‐transporting layer and interface passivator for p–i–n architecture perovskite solar cell (adv. Funct. Mater. 38/2021)
17. Perovskite/silicon tandem solar cells: marriage of convenience or true love story? – An overview10.1002/admi.201700731 ↗
18. Design guides for artificial photosynthetic devices consisting of voltage-matched perovskite/silicon tandem solar-cell modules and electrochemical reactor modules10.35848/1347-4065/acc3a5 ↗
19. Impact of carrier recombination on fill factor for large area heterojunction crystalline silicon solar cell with 25.1% efficiency10.1063/1.4937224 ↗
20. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26%10.1038/nenergy.2017.32 ↗
21. Emiliano
22. Over 30% efficiency bifacial 4-terminal perovskite-heterojunction silicon tandem solar cells with spectral albedo
23. Mechanically stacked, two-terminal graphene-based perovskite/silicon tandem solar cell with efficiency over 26%10.1016/j.joule.2020.01.015 ↗
24. 2T mechanically stacked perovskite/Si tandem cells beyond 28%: the role of 2D materials in perovskite top cells coupled with a commercially available bifacial c-Si heterojunction cell
25. Perovskite tandem solar cells: from fundamentals to commercial deployment10.1021/acs.chemrev.9b00780 ↗
26. Perovskite—a perfect top cell for tandem devices to break the S–Q limit
27. Light-stable methylammonium-free inverted flexible perovskite solar modules on PET exceeding 10.5% on a 15.7 cm 2 active area10.1021/acsami.1c05506 ↗
28. It's a trap! On the nature of localised states and charge trapping in lead halide perovskites10.1039/C9MH00500E ↗
29. Shift happens. How halide ion defects influence photoinduced segregation in mixed halide perovskites10.1021/acsenergylett.7b00357 ↗
30. Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics10.1039/C4SC03141E ↗
31. Compositional engineering for efficient wide band gap perovskites with improved stability to photoinduced phase segregation10.1021/acsenergylett.7b01255 ↗
32. Realizing full-color perovskite quantum dots light-emitting diodes via contemporary surface ligand/anion engineering
33. Direct surface passivation of perovskite film by 4-fluorophenethylammonium iodide toward stable and efficient perovskite solar cells10.1021/acsami.0c17773 ↗
34. Surface passivation of perovskite film for efficient solar cells10.1038/s41566-019-0398-2 ↗
35. Device performance of emerging photovoltaic materials (version 3)10.1002/aenm.202203313 ↗
36. Photoluminescence‐based characterization of halide perovskites for photovoltaics10.1002/aenm.201904134 ↗
37. Interpreting time-resolved photoluminescence of perovskite materials10.1039/D0CP04950F ↗
38. Enhanced stability of α-phase FAPbI 3 perovskite solar cells by insertion of 2D (PEA) 2 PbI 4 nanosheets10.1039/C9TA14207J ↗
39. Pin-hole free perovskite film for solar cells application prepared by controlled two-step spin-coating method10.1088/1757-899X/196/1/012037 ↗
40. Growth of perovskite nanorods from PbS quantum dots10.1557/adv.2018.188 ↗
41. Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures10.1038/s41560-019-0529-5 ↗
42. Significant stability enhancement of perovskite solar cells by facile adhesive encapsulation10.1021/acs.jpcc.8b09595 ↗
43. Encapsulation for long-term stability enhancement of perovskite solar cells10.1016/j.nanoen.2016.09.041 ↗
44. Strategy of enhancing built‐in field to promote the application of C‐TiO 2/SnO 2 bilayer Electron transport layer in high‐efficiency perovskite solar cells (24.3%)10.1002/smll.202204446 ↗
45. TiO2/SnO2 bilayer Electron transport layer for high efficiency perovskite solar cells10.3390/nano13020249 ↗
46. Surface engineering of TiO 2 ETL for highly efficient and hysteresis‐less planar perovskite solar cell (21.4%) with enhanced open‐circuit voltage and stability10.1002/aenm.201800794 ↗
47. Enhanced charge collection with passivation of the tin oxide layer in planar perovskite solar cells10.1039/C7TA04128D ↗
48. A comparative study of the crystallinity of polyetheretherketone by using density, DSC, XRD, and Raman spectroscopy techniques10.1016/j.polymertesting.2020.106878 ↗
49. Ferromagnetic iron oxide–cellulose nanocomposites prepared by ultrasonication10.1039/C7PY01587A ↗
50. Doped hole transport layer for efficiency enhancement in planar heterojunction organolead trihalide perovskite solar cells10.1016/j.nanoen.2015.04.029 ↗
51. High-work-function molybdenum oxide hole extraction contacts in hybrid organic–inorganic perovskite solar cells10.1021/acsami.6b10898 ↗
52. Utilizing n-type vanadium oxide films as hole-extracting layers for small molecule organic photovoltaics10.1063/1.3607478 ↗
53. Highly efficient organic photovoltaic cells with molybdenum oxide buffer layer
54. Performance improvement of inverted polymer solar cells using V2O5 as an anode buffer layer10.4028/www.scientific.net/MSF.663-665.865 ↗
55. Semitransparent perovskite solar cells with ultrathin protective buffer layers10.1021/acsaem.3c00735 ↗
56. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
57. Analysis of sputtering damage on I – V curves for perovskite solar cells and simulation with reversed diode model10.1021/acs.jpcc.6b09219 ↗
58. Methylamine gas treatment affords improving semitransparency, efficiency, and stability of CH 3 NH 3 PbBr 3 ‐based perovskite solar cells10.1002/solr.202100277 ↗
59. Upscaling inverted perovskite solar cells: optimization of laser scribing for highly efficient mini-modules10.3390/mi11121127 ↗
60. Open circuit voltage reduction due to recombination at the heterojunction solar cell edge10.1016/j.solener.2023.04.027 ↗
61. Slow shallow energy states as the origin of hysteresis in perovskite solar cells10.3389/fphot.2022.889837 ↗