A versatile optical-electrical-thermal simulation framework for photovoltaic devices integrating ray tracing and conversion losses
Source abstract
Abstract
Investigating the photoelectrical conversion principles of photovoltaic devices in-depth for efficiency improvement has always been a subject under intense heat discussions. Numerical simulation, serving as a rapid, cost-efficient, and effective method, holds the potential to disclose the entire intricate physical process. Numerous diverse mathematical models have been proposed in the literature for investigation, while the actual circumstances are highly complicated, and comprehensive analysis remains arduously challenging due to various impediments. Herein, we present a versatile simulation framework for photovoltaic (PV) devices. By integrating Monte Carlo ray tracing, equivalent circuit and layered thermal resistance models, it aims to realize optical-electrical-thermal coupling simulation, and meanwhile the conversion loss mechanism is also considered, facilitating an in-depth investigation into the comprehensive performances of PV devices. The findings of this study reveal that, for a typical HJT PV module, the photogenerated current density can attain 32.97 mA/cm 2 under normal incidence, and the conversion efficiency peaks at 23.8 % with a fill factor of 82.2 % under standard test condition (STC). Moreover, when the module operates under nominal operating cell temperature (NOCT) conditions, the operating temperature will ascend to 41.1 °C and the efficiency will decline to 21.75 %. The module absorbs 683.02 W/m 2 incident energy with one-third contributed by the inactive materials, and about 64 % of the total incident irradiance is converted into heat, thus only approximately a quarter of the total absorbed energy is the effective output (174 W/m 2), with the thermalization and angle-mismatch being the two dominant energy losses in the photoelectrical conversion process, accounting for 23 % and 10.8 % respectively.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: solar cell performance optimization · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Achieving carbon neutrality through green technological progress: evidence from China10.1016/j.enpol.2022.113397 ↗
2. Technologies and perspectives for achieving carbon neutrality
3. Achieving sustainable development goals: predicaments and strategies10.1080/13504509.2019.1692316 ↗
4. Perovskite/silicon tandem solar cells with bilayer interface passivation10.1038/s41586-024-07997-7 ↗
5. Solar cell efficiency tables (Version 64)10.1002/pip.3831 ↗
6. Effects of different environmental and operational factors on the PV performance: a comprehensive review10.1002/ese3.1043 ↗
7. Fundamental losses in solar cells10.1002/pip.1024 ↗
8. A detailed study on loss processes in solar cells10.1016/j.energy.2017.12.058 ↗
9. Main degradation mechanisms of silicon solar cells in Algerian desert climates10.1016/j.solener.2021.06.033 ↗
10. Performance of silicon heterojunction solar cells under low illumination conditions
11. Study of ash deposition characteristics of photovoltaic arrays taking into account the effect of photovoltaic module spacing and its effect on output characteristics: indoor experiment10.1016/j.energy.2024.133138 ↗
12. Innovative design and field performance evaluation of a desert-adapted PV module for enhanced solar energy harvesting and reliability in harsh arid environments10.1016/j.apenergy.2024.123359 ↗
13. Temperature-dependent performance of amorphous silicon photovoltaic/thermal systems in the long term operation10.1016/j.apenergy.2020.115156 ↗
14. A new photovoltaic module efficiency model for energy prediction and rating10.1109/JPHOTOV.2020.3045677 ↗
15. H. Goverde, B. Herteleer, D. Anagnostos, G. Köse, D. Goossens, B. Aldaladi, et al., Energy Yield Prediction Model for PV Modules Including Spatial and Temporal Effects, in: European Photovoltaic Solar Energy Conference and Exhibition - EUPVSEC, 2014.
16. A novel method for performance estimation of photovoltaic module without setting reference condition10.1016/j.ijepes.2021.107439 ↗
17. Coupled electrical-thermal modelling of photovoltaic modules under dynamic conditions10.1016/j.energy.2019.116043 ↗
18. Coupled optical-electrical-thermal loss modelling and energy distributions of a photovoltaic module10.1016/j.enconman.2022.116476 ↗
19. Heat generation and mitigation in silicon solar cells and modules10.1016/j.joule.2021.01.012 ↗
20. Parasitic heating of perovskite‐ and silicon‐based photovoltaics
21. Analysis of the power loss and quantification of the energy distribution in PV module10.1016/j.apenergy.2019.114333 ↗
22. A practical optical and electrical model to estimate the power losses and quantification of different heat sources in silicon based PV modules10.1016/j.renene.2018.04.060 ↗
23. Finite element simulation of perovskite solar cell: a study on efficiency improvement based on structural and material modification10.1016/j.solener.2018.12.032 ↗
24. Towards nanostructured perovskite solar cells with enhanced efficiency: coupled optical and electrical modeling10.1016/j.solener.2016.08.039 ↗
25. Influence of perovskite interface morphology on the photon management in perovskite/silicon tandem solar cells10.1021/acsami.9b21985 ↗
26. Using photonic glasses as colored covers for solar energy harvesting
27. Optical modelling of tandem solar cells using hybrid organic-inorganic tin perovskite bottom sub-cell10.1016/j.solener.2021.01.054 ↗
28. Effect of an incoherent glass substrate on the absorption efficiency of organic solar cells at oblique incidence analyzed by the transfer matrix method with a glass factor10.7567/JJAP.52.052301 ↗
29. Optical properties and modeling of 2D perovskite solar cells10.1002/solr.201700062 ↗
30. Chain pyramid texturization for better light trapping and efficiency of silicon solar cells10.1016/j.solmat.2022.112137 ↗
31. Comprehensive cell to module optical loss analysis of metal assisted chemically etched inverted pyramid textured multi-crystalline silicon solar cells and modules by ray-tracing method10.1016/j.solener.2022.08.025 ↗
32. Design and optical characterisation of an efficient light trapping structure for dye-sensitized solar cell integrated windows10.1007/s12273-018-0485-1 ↗
33. A simplified mathematical model for power output predicting of Building Integrated Photovoltaic under partial shading conditions10.1016/j.enconman.2018.11.036 ↗
34. Analyses of I-V curve hysteresis in perovskite solar cells using circuit simulator10.1016/j.solener.2023.112087 ↗
35. Synergy of the ray tracing+carrier transport approach: on efficiency of perovskite solar cells with a back reflector10.1016/j.solmat.2019.110050 ↗
36. On the efficiency of perovskite solar cells with a back reflector: effect of a hole transport material10.1039/D1CP03313A ↗
37. Combining ray tracing with device modeling to evaluate experiments for an optical analysis of crystalline Si solar cells and modules10.1016/j.egypro.2017.09.269 ↗
38. Determination of electrical characteristics and temperature of PV modules by means of a coupled electrical-thermal model10.1063/5.0001599 ↗
39. Colored optic filters on c‐Si IBC solar cells for building integrated photovoltaic applications10.1002/pip.3504 ↗
40. Development of thermo–electrical loss model for photovoltaic module with inhomogeneous temperature10.1016/j.energy.2022.123542 ↗
41. Electrical-thermal analysis of III–V triple-junction solar cells under variable spectra and ambient temperatures10.1016/j.solener.2015.06.003 ↗
42. A coupled optical-electrical-thermal model of the bifacial photovoltaic module10.1016/j.apenergy.2019.114075 ↗
43. Optical modeling and characterization of bifacial SiNx/AlOx dielectric layers for surface passivation and antireflection in PERC10.1002/pip.3745 ↗
44. Photovoltaic devices: Opto‐electro‐thermal physics and modeling
45. Enhanced electro‐optical properties of nanocone/nanopillar dual‐structured arrays for ultrathin silicon/organic hybrid solar cell applications10.1002/aenm.201501793 ↗
46. A comparative study on thermal performance of a 3-D model based solar photovoltaic panel through finite element analysis
47. Smarti - an open source matlab ray tracing tool for solar cell and module optics
48. Combining structures on different length scales in ray tracing: analysis of optical losses in solar cell modules10.1007/s11082-014-0078-x ↗
49. Optical simulations in perovskite devices: a critical analysis10.1021/acsphotonics.2c00484 ↗
50. Optical model for thin-film photovoltaic devices with large surface textures at the front side
51. Application of a new ray tracing framework to the analysis of extended regions in Si solar cell modules10.1016/j.egypro.2013.07.253 ↗
52. Absorption in each layer of a silicon heterojunction solar cell
53. McIntosh KR, Baker-Finch SC. Opal 2: rapid optical simulation of silicon solar cells. 2012 38th IEEE Photovoltaic Specialists Conference 2012. p. 265-271.10.1109/PVSC.2012.6317616 ↗
54. Abbott · 2016 · 976
55. Performance modelling of photovoltaic modules under actual operating conditions considering loss mechanism and energy distribution10.1016/j.apenergy.2021.117205 ↗
56. Olivier Dupré · 2016
57. - comments on the optical constants of metals and an introduction to the data for several metals
58. The optical properties of metallic aluminum
59. Measurement of the optical constants of soda-lime glasses in dependence of iron content and modeling of iron-related power losses in crystalline Si solar cell modules10.1109/JPHOTOV.2015.2498043 ↗
60. Optical constants of UV transparent EVA and the impact on the PV module output power under realistic irradiation10.1016/j.egypro.2016.07.136 ↗
61. Vogt · 2015
62. Infrared light management in high-efficiency silicon heterojunction and rear-passivated solar cells10.1063/1.4772975 ↗
63. Current losses at the front of silicon heterojunction solar cells10.1109/JPHOTOV.2011.2174967 ↗
64. Mathematical modelling and performance evaluation of a hybrid photovoltaic-thermoelectric system10.1016/j.enconman.2019.111800 ↗
65. Spectrally selective approaches for passive cooling of solar cells: a review10.1016/j.apenergy.2020.114548 ↗
66. Investigating the effect of radiative cooling on the operating temperature of photovoltaic modules
67. A review on the integration of radiative cooling and solar energy harvesting
68. Thermal management of building-integrated photovoltaic/thermal systems: a comprehensive review10.1016/j.solener.2021.01.005 ↗
69. Solar energy harvesting from the photovoltaic/thermal (PV/T) pavement: energy performance analyses and comparison considering ground influence10.1016/j.scs.2023.104895 ↗
70. Parametric investigation of photovoltaic-thermal systems integrated with porous phase change material10.1016/j.applthermaleng.2021.117727 ↗
71. A hygroscopic composite backplate enabling passive cooling of photovoltaic panels10.1021/acsenergylett.3c00196 ↗