Thermal effect of VIPV modules in refrigerated trucks
Source abstract
Abstract
The integration of Photovoltaic (PV) modules within the outer structure of commercial transporters offers a great potential as an additional source of energy that can be utilized, for example, directly by the drive train of the vehicle, or by accessory equipment. However, to understand the benefits of such a system, the effect and relevance of some thermodynamic variables introduced by the Vehicle Integrated Photovoltaic (VIPV) system must be assessed. Particularly, the share of the solar irradiance that cannot be converted into electricity by the solar cell and is instead transformed into heat must be considered for certain applications such as the transportation of goods that require a controlled temperature. A one-dimensional thermal simulation model based on a Resistance-Capacitance methodology was created and validated experimentally. The model was used to predict the thermal behavior of the box-body of a truck for a representative year in three cities in Europe (Stockholm, Freiburg, and Seville), with a known Bill of Materials (BOM), and a set of given assumptions and constraints. It was found that, under the simulated conditions laid in this study, the additional heat generated by the PV modules that manages to go through the insulation material and reach the refrigerated cargo area, may raise the temperature of the contained air by an average of 0.36 °C, 0.5 °C, and 0.67 °C, respectively for the observed cities, and as much as 3.12 °C, 2.98 °C and 2.61 °C. When forced convection caused by the movement of the truck was applied into the model (with a constant wind speed of 50 km/h), the temperature of the solar cell dropped significantly, which, for the case of Freiburg, meant an increase in the contained air temperature of a maximum of 0.6 °C. A refrigeration system was subsequently considered for a target air temperature of 2 °C and −18 °C, and it was found that for the simulated scenarios, the harvested solar energy could easily offset the additional energetic demand caused by the PV system, and, in most cases, completely balance out the total annual demand of the chiller.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · solar cell performance optimization · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. A feasibility study of solar PV‐powered electric cars using an interdisciplinary modeling approach for the electricity balance, CO 2 emissions, and economic aspects: the cases of The Netherlands, Norway, Brazil, and Australia10.1002/pip.3202 ↗
2. M. Heinrich, C. Kutter, F. Basler, M. Mittag, D. Eberlein, A. Schmid, C. Reise, and T. Kroyer, “Potential and challenges of vehicle integrated photovoltaics for passenger cars,” in EUPVSEC.
3. Analysis for the potential of high‐efficiency and low‐cost vehicle‐integrated photovoltaics10.1002/solr.202200556 ↗
4. Carr · 2020
5. Environmental impacts of integrated photovoltaic modules in light utility electric vehicles10.3390/en13195120 ↗
6. Kutter · 2021
7. Mittag · 2019
8. The possibilities of application of radiant wall cooling in existing buildings as a part of their retrofit10.1051/e3sconf/201911103008 ↗
9. Temperature dependence of I–V characteristics and performance parameters of silicon solar cell10.1016/j.solmat.2008.07.010 ↗
10. Integrated lightweight, glass-free PV module technology for box bodies of commercial trucks
11. M. A. Schüler, C. Kutter, L. E. Alanis, L. Saroch, C. Barz, J. Bornwasser, S. Reichert, H. Neuhaus, M. Heinrich, High-voltage vehicle integrated photovoltaic system concept and demonstrator truck: presented at WCPEC-8, 8th world conference on photovoltaic Energy Convers., 26-30 September 2022, Milan, Italy.
12. Thermal modelling for permanent magnet synchronous machine (PMSM)10.11591/ijpeds.v8.i4.pp1903-1912 ↗
13. Grünbauer · 2004
14. Three-dimensional thermal modeling of a photovoltaic module under varying conditions10.1016/j.solener.2012.05.034 ↗
15. The thermal and electrical yield of a PV-thermal collector10.1016/S0038-092X(01)00094-9 ↗
16. Blum · 2021
17. Mcadams · 1954
18. Measurement of the convective heat transfer coefficient and temperature of vehicle-integrated photovoltaic modules10.3390/en15134818 ↗
19. Solar potential on commerical trucks: results of an irradiance measurement campaign on 6 trucks in Europe and USA
20. Dehli · 2023
21. Wind velocity and forced heat transfer model for photovoltaic module10.3390/fluids9010017 ↗