journal article·2025-01Open access

Enhancing efficiency of dense array CPV receivers with controlled DC-DC converters and adaptive microfluidic cooling under non-uniform solar irradiance

Desideri Regany, Francesc Majós Palau, Alicia Crespo, Jérôme Barrau, Montse Vilarrubí, Joan Rosell-Urrutia

Abstract

Concentrating solar technologies offer substantial potential for optimizing solar energy for heat and power generation, particularly in green hydrogen production. This study investigates the use of commercial high efficiency concentrated photovoltaic (CPV) cells in a central tower concentrating solar system to enhance energy conversion efficiency. By integrating DC-DC converters with self-adaptive microfluidic cooling systems, we address current mismatches and temperature variations that affect CPV performance. The novel receiver design ensures scalability for large-scale implementations by implementing the electrical connections between DC-DC converters and each CPV cell without creating shaded areas. We numerically model and simulate the thermodynamic and electrical characteristics of a dense array CPV receiver, evaluating six illumination profiles. Our results indicate a significant improvement in receiver efficiency compared to the traditional configuration with bypass diodes, demonstrating an increase from 23.4 % to 30.3 % under a central Gaussian illumination profile, and reaching up to 38 % relative efficiency improvement depending on the applied profile. Power transfer losses decrease from 26 % to 10 % when 200 kW/m 2 of illumination non-uniformity occurs. The proposed solution enhances reliability and energy conversion efficiency, presenting a viable path forward for large-scale CPV applications. • Enhanced high-density CPV receiver efficiency using DC-DC converters and adaptive cooling under non-uniform irradiance. • Achieved significant relative efficiency increases of up to 38 % across various illumination profiles. • Power transfer losses reduced from 26 % to 10 % under 200 kW/m 2 of illumination non-uniformity. • Reduced current mismatch with controlled external DC-DC converters. • Scalable receiver design supports large-scale implementation without shading interconnections.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: solar cell performance optimization · Advanced DC-DC Converters · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Hydrogen and fuel cell systems
2. Hydrogen production by coupling pressurized high temperature electrolyser with solar tower technology10.1016/j.ijhydene.2016.11.034 ↗
3. Techno-economic modeling and optimization of solar-driven high-temperature electrolysis systems10.1016/j.solener.2017.07.077 ↗
4. Configuration design and performance optimum analysis of a solar-driven high temperature steam electrolysis system for hydrogen production10.1016/j.ijhydene.2013.01.199 ↗
5. Design and optimization of a combined solar thermophotovoltaic power generation and solid oxide electrolyser for hydrogen production10.1016/j.enconman.2018.09.033 ↗
6. Hydrogen production: fundamentals and case study summaries
7. Advanced concepts in concentrating photovoltaics (CPV)
8. Central receiver photovoltaics - a new generation of solar power10.1063/1.5053495 ↗
9. Focal region measurements of the 20 m2 tiled dish at the Australian National University10.1016/S0038-092X(98)00041-3 ↗
10. Assessment of the impact of non-uniform illumination and temperature profiles on a dense array CPV receiver performance10.1016/j.solener.2018.07.001 ↗
11. Measurements of power transfer efficiency in CPV cell-array models using individual DC-DC converters10.1016/j.apenergy.2014.12.038 ↗
12. Impact of DC-DC converters on the energy performance of a dense concentrator PV array under nonuniform irradiance and temperature profiles
13. A systematic method of interconnection optimization for dense-array concentrator photovoltaic system
14. Impact of via hole integration on multijunction solar cells for through cell via contacts and associated passivation treatment10.1109/JPHOTOV.2017.2711423 ↗
15. Simulation of a through cell via contacts architecture for HCPV multi-junction solar cells10.1016/j.solmat.2015.08.032 ↗
16. Silicon back contact solar cell configuration: a pathway towards higher efficiency10.1016/j.rser.2016.03.004 ↗
17. Reassessment of the limiting efficiency for crystalline silicon solar cells10.1109/JPHOTOV.2013.2270351 ↗
18. Dimroth
19. Azurspace Solar Power GMBH, “Concentrator Triple Junction Solar Cell. Cell Type: 3C44 – 5,5 x 5,5mm2. Application: Concentrating Photovoltaic (CPV) Modules” Accessed: May 14, 2024. [Online]. Available: https://www.azurspace.com/.
20. Cooling of photovoltaic cells under concentrated illumination: a critical review10.1016/j.solmat.2004.09.003 ↗
21. Solar cooling with concentrating photovoltaic/thermal (CPVT) systems10.1016/j.enconman.2007.04.004 ↗
22. The PV-FIBRE concentrator: a system for indoor operation of 1000X MJ solar cells10.1002/pip.745 ↗
23. Experimental demonstration of a tailored-width microchannel heat exchanger configuration for uniform wall temperature
24. Performance, limits, and thermal stress analysis of high concentrator multijunction solar cell under passive cooling conditions10.1016/j.applthermaleng.2019.114497 ↗
25. Distributed and self-adaptive microfluidic cell cooling for CPV dense array receivers
26. Dense array CPV receivers: impact of the cooling device on the net PV output for different illumination profiles10.1063/1.5053536 ↗
27. Self-adaptive microvalve array for energy efficient fluidic cooling in microelectronic systems
28. Microfluidic cell cooling system for electronics
29. Dickson · 1960 · 1956
30. On-sun testing of a 100-shingled-cell dense receiver array at ∼50 W/cm2 using overlapped single-axis foci10.1063/1.5053497 ↗
31. 2011 · 11
32. Temperature-regulated nonlinear microvalves for self-adaptive MEMS cooling10.1109/JMEMS.2008.927742 ↗
33. OmniOn Power, “Data Sheet for non-isolated DC-DC power modules, Naos Raptor 40A.” Accessed: Oct. 31, 2024. [Online]. Available: https://www.mouser.ec/datasheet/2/167/NSR040A0X_DS-1920160.pdf.
34. Assessment of the impact of non-uniform illumination and temperature profiles on a dense array CPV receiver performance10.1016/j.solener.2018.07.001 ↗
35. Microfluidic cell cooling system for electronics
36. Katche · 2023
37. Review of maximum power point tracking algorithms of PV system