journal article·2024-10

Advancing nickel seed layer electroplating for enhanced contact and passivation performance in TOPCon solar cells

Mengchao Xing, Taiqing Wang, Fangfang Cao, Haojiang Du, Mingdun Liao, Wei Liu, Feng Li, Chuanxiao Xiao, Wenrui Zhang, Zhenhai Yang, Zeng Yuheng, Jichun Ye

Publisher page

Abstract

Electroplating copper technology offers advantages such as low cost, good conductivity, and a simple process, making it a promising solution in the photovoltaics (PV) field. However, despite its effectiveness in reducing silver consumption, a significant challenge arises from suboptimal electrical contact between metal electrodes and the polycrystalline silicon films, limiting the application of electroplating techniques in tunnel oxide passivated contact (TOPCon) solar cells (SCs). In this study, we propose a simple method to enhance the quality of electrodeposited metals and improve contact performance with polycrystalline silicon films by lowering the electrodepositing temperature for nickel seed layer. Additionally, we optimize contact properties by modulating nickel deposition time and annealing temperature. This process results in excellent physical and electrical contact performance, achieving the lowest contact resistivity of 0.19 mΩ cm 2 and the improved adhesion strength. Ultimately, TOPCon SCs using low-temperature plated seed nickel and copper metal electrodes achieve an efficiency of 23.90%, which is attributed to advance the application of optimal nickel seed layer electroplating.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Photovoltaic System Optimization Techniques · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Passivating contacts for crystalline silicon solar cells10.1038/s41560-019-0463-6 ↗
2. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
3. Tunnel oxide passivated contacts as an alternative to partial rear contacts10.1016/j.solmat.2014.06.015 ↗
4. 24.4% industrial tunnel oxide passivated contact solar cells with ozone-gas oxidation Nano SiOx and tube PECVD prepared in-situ doped polysilicon10.1016/j.solmat.2022.111803 ↗
5. Mass production of industrial tunnel oxide passivated contacts (i‐TOPCon) silicon solar cells with average efficiency over 23% and modules over 345 W10.1002/pip.3180 ↗
6. Printing technologies for silicon solar cell metallization: a comprehensive review10.1002/pip.3674 ↗
7. Design considerations for multi-terawatt scale manufacturing of existing and future photovoltaic technologies: challenges and opportunities related to silver, indium and bismuth consumption10.1039/D1EE01814K ↗
8. Metal contact recombination in monoPolyTM solar cells with screen-printed & fire-through contacts10.1016/j.solmat.2018.12.026 ↗
9. Influence of polysilicon thickness on properties of screen‐printed silver paste metallized silicon oxide/polysilicon passivated contacts
10. Development of thin polysilicon layers for application in monoPolyTM cells with screen-printed and fired metallization10.1016/j.solmat.2019.110358 ↗
11. Review of the potential of the Ni/Cu plating technique for crystalline silicon solar cells10.3390/ma7021318 ↗
12. Progress of plated metallization for industrial bifacial TOPCon silicon solar cells10.1002/pip.3528 ↗
13. Laser ablation and Ni/Cu plating approach for tunnel oxide passivated contacts solar cells with variate polysilicon layer thickness: gains and possibilities in comparison to screen printing
14. “Direct contact electroplating sequence without initial seed layer for bifacial TOPCon solar cell metallization10.1109/JPHOTOV.2021.3051636 ↗
15. Interface oxides in femtosecond laser structured plated Ni-Cu-Ag contacts for silicon solar cells10.1016/j.solmat.2017.03.016 ↗
16. Enabling savings in silver consumption and poly-Si thickness by integration of plated Ni/Cu/Ag contacts for bifacial TOPCon solar cells10.1016/j.solmat.2022.111889 ↗
17. 24.18% efficiency TOPCon solar cells enabled by super hydrophilic carbon-doped polysilicon films combined with plated metal fingers10.1016/j.solmat.2023.112393 ↗
18. Challenges facing copper‐plated metallisation for silicon photovoltaics: insights from integrated circuit technology development10.1002/pip.3062 ↗
19. Effects of current density, coating thickness, temperature, pH and particle concentration on internal stress during Ni–MoS2 electrocodeposition10.1179/1743294413Y.0000000223 ↗
20. A strong-oxidizing mixed acid derived high-quality silicon oxide tunneling layer for polysilicon passivated contact silicon solar cell10.1016/j.solmat.2018.09.001 ↗
21. Detailed investigation of TLM contact resistance measurements on crystalline silicon solar cells10.1016/j.solener.2017.05.015 ↗