Investigation of the stability of metallic grids for large-area perovskite solar cells
Source abstract
Abstract
Metal contacts are an extremely important part of photovoltaic devices, since they might decrease device stability, or underperform in their function of current extraction. In the case of perovskite solar cells , the metallic component has been less investigated than other cell components, either in the back (rear) contact, or in the form of grid collectors in the front contact. The interaction between the perovskite layer and the metal contact is of utmost importance, since it has been demonstrated for gold and silver (most used metals in perovskite cells) that degradation processes might derive from unwanted contacts between the metal and the perovskite components. Herein, we present a systematic investigation of a series of metals typically used in the electronic or photovoltaic industries (Ag, Al, Au, Cu, Mo, Ni, Pd, Pt, and Ta) in order to assess their stability towards the processing steps of a typical perovskite cell assembly, and also when direct contact between the perovskite and the metal layer takes place. By assessing the morphological and electrical properties of the metal layer after performing a variety of tests, we observed that only four of those metals maintained their integrity. Based on the results, we point out which metal is expected to be most suitable one, from an industrial point of view, and to enable long-term device operation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Solid-state spectroscopy and crystallography
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. A comprehensive theoretical study of halide perovskites ABX310.1016/j.orgel.2016.05.046 ↗
2. Compositional and interface engineering of organic-inorganic lead halide perovskite solar cells10.1016/j.isci.2020.101359 ↗
3. Stability of perovskite materials and devices10.1016/j.mattod.2022.06.020 ↗
4. Development and challenges of metal halide perovskite solar modules10.1002/solr.202100545 ↗
5. Lead metal halide perovskite solar cells: fabrication, advancement strategies, alternatives, and future perspectives
6. Band gap tuning of CH₃NH₃Pb(Br(1-x)Clx)₃ hybrid perovskite for blue electroluminescence10.1021/acsami.5b02159 ↗
7. CH3NH3PbCl3 single crystals: inverse temperature crystallization and visible-blind UV-photodetector10.1021/acs.jpclett.5b01666 ↗
8. Frontiers, opportunities, and challenges in perovskite solar cells: a critical review10.1016/j.jphotochemrev.2017.11.002 ↗
9. Organometallic halide perovskites: sharp optical absorption edge and its relation to photovoltaic performance10.1021/jz500279b ↗
10. Defect tolerance in methylammonium lead triiodide perovskite10.1021/acsenergylett.6b00196 ↗
11. High defect tolerance in lead halide perovskite cspbbr310.1021/acs.jpclett.6b02800 ↗
12. Lead halide perovskite nanocrystals in the research spotlight: stability and defect tolerance10.1021/acsenergylett.7b00547 ↗
13. Iodine chemistry determines the defect tolerance of lead-halide perovskites10.1039/C8EE00124C ↗
14. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
15. NREL, Best Research-Cell Efficiencies, n.d.
16. 2D/3D heterojunction engineering at the buried interface towards high-performance inverted methylammonium-free perovskite solar cells10.1038/s41560-023-01295-8 ↗
17. Buried interface passivation: a key strategy to breakthrough the efficiency of perovskite photovoltaics10.1002/smll.202302585 ↗
18. Bilayer 2D-3D perovskite heterostructures for efficient and stable solar cells10.1021/acsnano.3c09176 ↗
19. Synergistic modification of 2D perovskite with alternating cations in the interlayer space and multisite ligand toward high-performance inverted solar cells10.1002/adma.202303275 ↗
20. Crystallization manipulation and holistic defect passivation toward stable and efficient inverted perovskite solar cells10.1039/D3EE00413A ↗
21. Defects and defect passivation in perovskite solar cells
22. Defect management and ion infiltration barrier enable high-performance perovskite solar cells10.1021/acsenergylett.4c00059 ↗
23. Overcoming the challenges of large-area high-efficiency perovskite solar cells10.1021/acsenergylett.7b00573 ↗
24. Large-area perovskite solar cells – a review of recent progress and issues10.1039/C8RA00384J ↗
25. Scalable deposition methods for large‐area production of perovskite thin films10.1002/eem2.12043 ↗
26. Research progress in large-area perovskite solar cells10.1364/PRJ.392996 ↗
27. Scalable fabrication and coating methods for perovskite solar cells and solar modules10.1038/s41578-019-0176-2 ↗
28. Toward large scale roll-to-roll production of fully printed perovskite solar cells10.1002/adma.201404598 ↗
29. Perovskite photovoltaics on roll-to-roll coated ultra-thin glass as flexible high-efficiency indoor power generators10.1016/j.xcrp.2020.100045 ↗
30. Roll‐to‐Roll processes for the fabrication of perovskite solar cells under ambient conditions10.1002/solr.202100341 ↗
31. Negligible‐pb‐waste and upscalable perovskite deposition technology for high‐operational‐stability perovskite solar modules10.1002/aenm.201803047 ↗
32. Highly uniform large-area (100 cm2) perovskite CH3NH3PbI3 thin-films prepared by single-source thermal evaporation10.3390/coatings8080256 ↗
33. Hybrid perovskite films deposited by thermal evaporation from a single source10.1007/s10854-021-05844-3 ↗
34. Lead iodide thin films via rf sputtering10.1021/acs.cgd.9b01250 ↗
35. Novel physical vapor deposition approach to hybrid perovskites: growth of MAPbI 3 thin films by RF-magnetron sputtering10.1038/s41598-018-33760-w ↗
36. Scalable fabrication of perovskite solar cells10.1038/natrevmats.2018.17 ↗
37. Scalable fabrication of metal halide perovskite solar cells and modules10.1021/acsenergylett.9b01396 ↗
38. Series and parallel module design for large-area perovskite solar cells10.1021/acsaem.9b00531 ↗
39. Laser-based series interconnection of chalcopyrite und perovskite solar cells: Analysis of material modifications and implications for achieving small dead area widths
40. Next-generation applications for integrated perovskite solar cells10.1038/s43246-022-00325-4 ↗
41. Reducing losses in perovskite large area solar technology: laser design optimization for highly efficient modules and minipanels10.1002/aenm.202103420 ↗
42. Upscaling inverted perovskite solar cells: optimization of laser scribing for highly efficient mini-modules10.3390/mi11121127 ↗
43. Learning from existing photovoltaic technologies to identify alternative perovskite module designs10.1039/D0EE01923B ↗
44. A review on the development of metal grids for the upscaling of perovskite solar cells and modules
45. Large area efficient interface layer free monolithic perovskite/homo-junction-silicon tandem solar cell with over 20% efficiency10.1039/C8EE00689J ↗
46. Highly conductive and transparent silver grid/metal oxide hybrid electrodes for low-temperature planar perovskite solar cells10.1016/j.jpowsour.2016.10.101 ↗
47. Embedded current collectors for efficient large area perovskite solar cells10.1002/er.7476 ↗
48. Electrochemical corrosion of Ag electrode in the silver grid electrode-based flexible perovskite solar cells and the suppression method
49. Low-temperature screen-printed metallization for the scale-up of two-terminal perovskite–silicon tandems10.1021/acsaem.9b00502 ↗
50. Efficient Ni/Au mesh transparent electrodes for ITO-free planar perovskite solar cells10.3390/nano9070932 ↗
51. Embossed transparent electrodes assembled by bubble templates for efficient flexible perovskite solar cells10.1016/j.nanoen.2021.106384 ↗
52. Efficient, monolithic large area organohalide perovskite solar cells10.1039/C6TA04973G ↗
53. Efficient flexible perovskite solar cells using low-cost Cu top and bottom electrodes10.1021/acsami.0c06461 ↗
54. Low temperature screen-print metallization for the scale up of 2-terminal perovskite- silicon Tandems_Supporting information
55. Addition of N-(2-Aminoethyl)naphthalimide and mercaptopropionic acid to increase the stability of CsFAMA perovskite solar cells10.21577/0103-5053.20220072 ↗
56. How to make over 20% efficient perovskite solar cells in regular (n–i–p) and inverted (p–i–n) architectures10.1021/acs.chemmater.8b00136 ↗
57. Assembly considerations for dye-sensitized solar modules with polymer gel electrolyte10.1021/acs.iecr.6b02181 ↗
58. Scaling limits to large area perovskite solar cell efficiency10.1002/pip.3035 ↗
59. Photoinduced degradation of methylammonium lead triiodide perovskite semiconductors10.1039/C6TA06497C ↗
60. In situ XPS study of the surface chemistry of MAPI solar cells under operating conditions in vacuum10.1039/C8CP01259H ↗
61. In situ studies of the degradation mechanisms of perovskite solar cells10.1002/eom2.12025 ↗
62. Mechanics-coupled stability of metal-halide perovskites10.1016/j.matt.2021.06.028 ↗
63. Degradation pathways in perovskite solar cells and how to meet international standards10.1038/s43246-022-00281-z ↗
64. First-principles study of ion diffusion in perovskite solar cell sensitizers10.1021/jacs.5b03615 ↗
65. Relationship between ion migration and interfacial degradation of CH3NH3PbI3 perovskite solar cells under thermal conditions10.1038/s41598-017-00866-6 ↗
66. Oxidized spiro-OMeTAD: investigation of stability in contact with various perovskite compositions10.1021/acsaem.1c02375 ↗
67. Temperature behaviour of mixed-cation mixed-halide perovskite solar cells. Analysis of recombination mechanisms and ion migration10.1016/j.orgel.2023.106843 ↗
68. Silver iodide formation in methyl ammonium lead iodide perovskite solar cells with silver top electrodes10.1002/admi.201500195 ↗
69. Degradation mechanism of silver metal deposited on lead halide perovskites10.1021/acsami.9b20315 ↗
70. Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures10.1038/s41560-019-0529-5 ↗