Low-temperature influence on the properties and efficiency of thin-film perovskite solar cells fabricated by the PVco-D technique
Source abstract
Abstract
The study discussed in this publication aimed to develop a perovskite solar cell adapted to operating conditions at reduced temperature and pressure and less than 1 μm thick. The physical vapor co-deposition technique was proposed and successfully used to create a solar cell structure with a thin layer of hybrid perovskite as an energy-collecting material. A comprehensive analysis of methylammonium lead iodide behavior in a wide temperature range from 10 K to 320 K was carried out to implement this project. The initial phase included assessing the degradation of the perovskite material layer after cooling to the temperature of liquid helium and then re-heating it to room temperature. Then, using spectroscopic techniques, the characteristics of the layers` optical and electrical properties were determined. The obtained results allowed the design of the complete structure of a thin-film perovskite cell, which was made using only the vacuum sublimation process. Simulations using the SCAPS-1D program and experimental results showed high agreement and allowed for obtaining an efficiency of approximately 18.5 % in the interested temperature range. Perovskite solar cell stability tests over six months confirmed the positive impact of the proposed technique for depositing the complete cell structure on its temporal stability. The research results are optimistic for the applications of perovskite cells in space.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange10.1126/science.aaa9272 ↗
2. Promises and challenges of perovskite solar cells10.1126/science.aam6323 ↗
3. High efficiency methylammonium lead triiodide perovskite solar cells: the relevance of non-stoichiometric precursors10.1039/C5EE02555A ↗
4. The dynamics of methylammonium ions in hybrid organic–inorganic perovskite solar cells10.1038/ncomms8124 ↗
5. Cation rotation in methylammonium lead halides10.1016/0038-1098(85)90959-7 ↗
6. Fully inkjet-printed photodetector using a graphene/perovskite/graphene heterostructure10.1109/TED.2019.2911715 ↗
7. Zero-dimensional (CH3NH3)3Bi2I9 perovskite for optoelectronic applications
8. Slot-die coated methylammonium-free perovskite solar cells with 18% efficiency10.1016/j.solmat.2021.111189 ↗
9. Optoelectronic studies of methylammonium lead iodide perovskite solar cells with mesoporous TiO2: separation of electronic and chemical charge storage, understanding two recombination lifetimes, and the evolution of band offsets during J–V hysteresis10.1021/jacs.5b00761 ↗
10. Third order nonlinear optical properties of organometal halide perovskite by means of the Z-scan technique10.1016/j.cplett.2016.01.041 ↗
11. Iodide and charge migration at defective surfaces of methylammonium lead triiodide perovskites: the role of hydrogen bonding10.1016/j.apsusc.2022.154501 ↗
12. Conversion efficiency enhancement of methylammonium lead triiodide perovskite solar cells converted from thermally deposited lead iodide via thin methylammonium iodide interlayer10.1016/j.orgel.2020.105713 ↗
13. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
14. High-pressure single-crystal structures of 3D lead-halide hybrid perovskites and pressure effects on their electronic and optical properties10.1021/acscentsci.6b00055 ↗
15. 2023
16. Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes10.1038/s41586-021-03964-8 ↗
17. Efficient bifacial monolithic perovskite/silicon tandem solar cells via bandgap engineering10.1038/s41560-020-00756-8 ↗
18. Insight into the effect of halogen X in methylammonium lead halide (MAPbX3) spin-coated on zinc oxide film10.1016/j.optmat.2022.113238 ↗
19. Stability improvement of methylammonium lead iodide perovskite thin films by bismuth doping10.1007/s11837-022-05347-4 ↗
20. Properties and applications of hybrid organic-inorganic halide perovskites thin films
21. Generation of red light with intense photoluminescence assisted by Forster resonance energy transfer from Znq2 and DCM thin films10.1007/s11356-022-23217-z ↗
22. Perovskite thin films for optoelectronic devices: study of their stability
23. Diagnostic and control of linear and nonlinear optical effects in selected self-assembled metallophthalocyanine chlorides nanostructures10.1016/j.dyepig.2018.04.048 ↗
24. Linear and nonlinear optical properties of Manganese bis-(8- hydroxyquinoline) thin films for optoelectronic devices: experimental and computational studies10.1016/j.molstruc.2021.131558 ↗
25. Optical and electronic properties of the natural Alizarin dye: theoretical and experimental investigations for DSSCs application10.1016/j.optmat.2022.112113 ↗
26. Experimental and computational analysis of the Linear and Nonlinear optical properties of Magnesium bis-(8-hydroxyquinoline) thin film10.1016/j.jallcom.2022.165947 ↗
27. CH3NH3PbX3, ein Pb(II)-System mit kubischer Perowskitstruktur/CH3NH3PbX3, a Pb(II)-System with Cubic Perovskite Structure10.1515/znb-1978-1214 ↗
28. Structures, phase transitions and tricritical behavior of the hybrid perovskite methyl ammonium lead iodide10.1038/srep35685 ↗
29. Structural and optical properties of methylammonium lead iodide across the tetragonal to cubic phase transition: implications for perovskite solar cells10.1039/C5EE02925B ↗
30. Lattice dynamics and vibrational spectra of the orthorhombic, tetragonal, and cubic phases of methylammonium lead iodide10.1103/PhysRevB.92.144308 ↗
31. Structural study on cubic–tetragonal transition of CH3NH3PbI310.1143/JPSJ.71.1694 ↗
32. Structural evolution in methylammonium lead iodide CH3NH3PbI310.1021/acs.jpca.5b09884 ↗
33. Optical and morphological properties of Curcuma longa dye for dye-sensitized solar cells10.1007/s11356-021-14551-9 ↗
34. Optical and morphological properties of DCM thin films co-doped of Znq2 by PVD: theoretical and experimental investigations10.1016/j.vacuum.2024.112997 ↗
35. electronic source: http://gwyddion.net/documentation/user-guide-en/statistical-analysis.html.
36. AFM methods for studying the morphology and micromechanical properties of the membrane of human buccal epithelium cell10.1038/s41598-023-33881-x ↗
37. Heavens · 1991
38. Simulation study of optical transmission properties of ZnO thin film deposited on different substrates
39. Macleod · 2010
40. Estimation of the optical constants and the thickness of thin films using unconstrained optimization10.1006/jcph.1999.6224 ↗
41. Topography and nonlinear optical properties of thin films containing iodide-based hybrid perovskites10.3390/nano14010050 ↗
42. Reversible hydration of CH3NH3PbI3 in films, single crystals, and solar cells10.1021/acs.chemmater.5b00660 ↗
43. Optical properties of photovoltaic organic–inorganic lead halide perovskites10.1021/acs.jpclett.5b01865 ↗
44. Optical properties of chiral single-walled carbon nanotubes thin films10.1016/j.optmat.2019.109295 ↗
45. High-pressure single-crystal structures of 3D lead-halide hybrid perovskites and pressure effects on their electronic and optical properties10.1021/acscentsci.6b00055 ↗
46. M Burgelman, et al., University of Gent Department of Electronics and Information Systems (ELIS); https://scaps.elis.ugent.be/SCAPS/20manual/20most/20recent.pdf.
47. Radiation tolerance of perovskite solar cells under gamma ray10.1016/j.orgel.2019.05.008 ↗