journal article·2024-08Open access

Detailed-balance assessment of radiative cooling for multi-junction solar cells under unconcentrated and low-concentrated light

Pietro Testa, Matteo Cagnoni, Federica Cappelluti

Abstract

Multi-junction solar cells are the best technology to achieve high-efficiency photovoltaics. Yet, their thermal management is crucial to ensure high performance and reliability, particularly in concentrating photovoltaic systems. Recent studies have proposed radiative cooling as an innovative, passive, cost-effective, and scalable technique to cool down solar cells. In this study, we analyze its impact on multi-junction solar cells under different illumination conditions by means of a detailed-balance model. First, we demonstrate that radiative cooling can provide greater efficiency gain in multi-junction devices than in single-junction ones despite the fact that the former heat up less than the latter. In fact, in multi-junction cells, the lower heating is more than compensated for by the stronger efficiency degradation with increasing temperature, due to their wider radiative recombination spectrum. Then, we explore two possible strategies to effectively use radiative cooling in low-concentration photovoltaic systems, such as building integrated concentrating photovoltaics. The first one is to combine the radiative cooler with a nonradiative cooling system, which then has relaxed performance requirements. The second one is to increase the radiative cooler area relative to that of the solar cell. Both approaches can provide significant performance benefits, whose magnitude depends on the selected design and application. For an optimal triple-junction cell under 10-sun concentration, we find that a radiative cooler having 5 × the area of the solar cell reduces by 90% the nonradiative cooling power required to maintain the cell temperature at 60 o C and achieves +2% absolute efficiency gain over 1-sun operation. • Radiative cooling of MJ solar cells is studied by a detailed balance model. • Radiative coolers can reduce the temperature of MJ solar cells by up to ∼ 20 K. • Radiative coolers need a large area or coupling with a nonradiative cooler for CPVs.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Thermal Radiation and Cooling Technologies · solar cell performance optimization · Optical properties and cooling technologies in crystalline materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Best research-cell effficiency chart. URL: https://www.nrel.gov/pv/cell-efficiency.html.
2. Detailed balance limit of efficiency of p-n junction solar cells10.1063/1.1736034 ↗
3. Analysis of temperature coefficients for III–V multi-junction concentrator cells10.1002/pip.2285 ↗
4. Dupré · 2017
5. Advanced cooling techniques of P.V. modules: A state of art10.1016/j.csite.2020.100674 ↗
6. Cooling of photovoltaic cells under concentrated illumination: a critical review10.1016/j.solmat.2004.09.003 ↗
7. Review of photovoltaic module cooling methods and performance evaluation of the radiative cooling method10.1016/j.rser.2018.12.051 ↗
8. Passive radiative cooling below ambient air temperature under direct sunlight10.1038/nature13883 ↗
9. Balaji · 2021
10. Radiative cooling of solar cells10.1364/OPTICA.1.000032 ↗
11. Improving photovoltaic performance through radiative cooling in both terrestrial and extraterrestrial environments10.1364/OE.23.0A1120 ↗
12. Passive radiative cooling and other photonic approaches for the temperature control of photovoltaics: A comparative study for crystalline silicon-based architectures10.1364/OE.388208 ↗
13. Radiative sky cooling of solar cells: fundamental modelling and cooling potential of single-junction devices10.1039/D0SE01536A ↗
14. Cementitious materials as promising radiative coolers for solar cells10.1016/j.isci.2022.105320 ↗
15. Radiative cooling of solar absorbers using a visibly transparent photonic crystal thermal blackbody10.1073/pnas.1509453112 ↗
16. Is enhanced radiative cooling of solar cell modules worth pursuing?10.1016/j.solmat.2016.01.039 ↗
17. A comprehensive photonic approach for solar cell cooling10.1021/acsphotonics.7b00089 ↗
18. Performance analysis of enhanced radiative cooling of solar cells based on a commercial silicon photovoltaic module10.1016/j.solener.2018.10.043 ↗
19. Silver ants-inspired flexible photonic architectures with improved transparency and heat radiation for photovoltaic devices10.1016/j.solmat.2019.110135 ↗
20. Lightweight, passive radiative cooling to enhance concentrating photovoltaics10.1016/j.joule.2020.10.004 ↗
21. Determining the effectiveness of radiative cooler-integrated solar cells
22. Radiative cooling for low-bandgap photovoltaics under concentrated sunlight10.1364/OE.27.00A404 ↗
23. Multi-junction solar cells paving the way for super high-efficiency10.1063/5.0048653 ↗
24. Status and challenges of multi-junction solar cell technology10.3389/fenrg.2022.971918 ↗
25. Building integrated concentrating photovoltaics: A review10.1016/j.rser.2010.07.017 ↗
26. Building integrated solar concentrating systems: A review10.1016/j.apenergy.2019.114288 ↗
27. Low concentrating photovoltaics (LCPV) for buildings and their performance analyses10.1016/j.apenergy.2020.115839 ↗
28. Detailed balance limit of the efficiency of tandem solar cells10.1088/0022-3727/13/5/018 ↗
29. Limiting efficiencies for photovoltaic energy conversion in multigap systems10.1016/0927-0248(96)00015-3 ↗
30. Extended detailed balance modeling toward solar cells with cement-based radiative coolers
31. Limiting efficiencies of ideal single and multiple energy gap terrestrial solar cells10.1063/1.328272 ↗
32. Efficiency limit of perovskite/Si tandem solar cells10.1021/acsenergylett.6b00405 ↗
33. Field performance versus standard test condition efficiency of tandem solar cells and the singular case of perovskites/silicon devices10.1021/acs.jpclett.7b02277 ↗
34. The chemical potential of radiation10.1088/0022-3719/15/18/012 ↗
35. Y.-w. Lin, E. Schlenker, Z. Zhou, P. Bermel, RadCool: a web-enabled simulation tool for radiative cooling, in: The Summer Undergraduate Research Fellowship (SURF) Symposium, 2017.
36. MODTRAN5: 2006 update
37. Energy conversion approaches and materials for high-efficiency photovoltaics10.1038/nmat4676 ↗
38. The influence of solar spectrum and concentration factor on the material choice and the efficiency of multijunction solar cells10.1038/s41598-019-56457-0 ↗
39. Physics of the temperature coefficients of solar cells10.1016/j.solmat.2015.03.025 ↗
40. The effect of concentrated light intensity on temperature coefficient of the InGaP/InGaAs/Ge triple-junction solar cell10.2174/1876973X01508010106 ↗
41. Mid-infrared emissivity of crystalline silicon solar cells10.1016/j.solmat.2017.10.002 ↗
42. Angle-resolved direct emissivity measurements on unencapsulated solar cells for passive thermal control10.1109/JPHOTOV.2024.3372329 ↗
43. Plate micro-fins in natural convection: An opportunity for passive concentrating photovoltaic cooling10.1016/j.egypro.2015.12.037 ↗
44. A review on recent development of cooling technologies for concentrated photovoltaics (CPV) systems