journal article·2024-07

Enhancement in efficiency of solar photovoltaic power generation with the assistance of PVC/TiO2 reflective composite applied for double-sided power generation

Songcheng Han, Han Zhang, Jun Zhang, Yanli Qi

Publisher page

Abstract

Solar photovoltaic power generation is a productive and environmentally friendly technique. The results of objective evaluations show that double-sided power generation is more efficient than single-sided power generation, with a possible increase of 5 %–30 %. Hence, it is necessary to identify a composite that reflects the exact sunlight waveband (300–1100 nm) onto the backside of photovoltaic panels used for double-sided power generation. Herein, two different crystalline types of titanium dioxide (TiO 2), rutile (R–TiO 2 ) and anatase (A-TiO 2 ), were combined with plasticized polyvinyl chloride (PVC) to create composites. A comparative analysis was conducted with other commonly utilized reflective fillers, such as barium sulfate (BaSO 4) and magnesium hydroxide (Mg(OH) 2). As a result, the R–TiO 2 was identified as the most appropriate substance to be blended with PVC for the production of PVC/R–TiO 2 composite. As the quantity of R–TiO 2 increased from 0 to 100 phr, reflectance in the distinctive waveband of 300–1100 nm of the PVC/R–TiO 2 rose from 5.30 % to 82.97 %. Moreover, an improvement in the thermal conductivity of PVC/R–TiO 2 sample was observed, which increased by 59.2 % from 0.179 W m −1 K −1 to 0.285 W m −1 K −1 , indicating a positive effect on heat transfer. The rheological measurement showed that the amount of reflective filler was inversely proportional to the compatibility of the reflective filler with plasticized PVC in the overall composite system, whereas the thermogravimetric analysis indicated that the thermal stability of the composites improved as the number of reflective fillers increased. Substantially, PVC/R–TiO 2 composites exhibit better performance in enhancing the power generation efficiency of solar photovoltaic panels.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Engineering and Technology Innovations · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Fossil fuel dependence and energy insecurity10.1186/s13705-022-00353-5 ↗
2. Unextractable fossil fuels in a 1.5 °C world10.1038/s41586-021-03821-8 ↗
3. Fuzzy decision-making model for solar photovoltaic panel evaluation10.3390/en16135161 ↗
4. Greenhouse gases utilization: a review10.1016/j.fuel.2021.121017 ↗
5. Investment risks in power generation: a comparison of fossil fuel and renewable energy dominated markets10.1016/j.eneco.2016.07.005 ↗
6. Aggregation and allocation of greenhouse gas emissions in oil and gas production: implications for life-cycle greenhouse gas burdens10.1021/acssuschemeng.9b03136 ↗
7. Alternating current photovoltaic effect10.1002/adma.202001532 ↗
8. Development and basic photovoltaic characteristics of a solar generator with double-sided silicon cells10.3103/S0003701X1501003X ↗
9. Analysis of output power change of polycrystalline silicon solar power generation system considering temperature factor10.1007/s12517-020-05886-7 ↗
10. Performance analysis of a solar photovoltaic power generation system with spray cooling10.1016/j.csite.2021.101723 ↗
11. Effect of the temperature difference between land and lake on photovoltaic power generation10.1016/j.renene.2021.12.011 ↗
12. Experimental study of bifacial photovoltaic module with waste polyvinyl chloride flex and acrylonitrile butadiene styrene road side safety sticker as an alternative reflector: optimization using response surface methodology10.1007/s11356-023-28257-7 ↗
13. A comparative analysis of polycrystalline and bifacial photovoltaic module under various partial shading condition10.1016/j.enconman.2022.116223 ↗
14. Performance analysis of n-type PERT bifacial solar PV module under diverse albedo conditions10.1016/j.solener.2023.01.020 ↗
15. Extensive energy, exergy, economic, exergoeconomic, enviroeconomic, and energy payback time analysis and investigation on bifacial solar photovoltaic module with nonbiodegradable waste as reflectors
16. Evaluation of cooling property of high density polyethylene (HDPE)/titanium dioxide (TiO2) composites after accelerated ultraviolet (UV) irradiation10.1016/j.solmat.2015.06.032 ↗
17. CaCO3 as a new member of high solar-reflective filler on the cooling property in polymer composites10.1002/vnl.21801 ↗
18. A new member of solar heat-reflective pigments: BaTiO3 and its effect on the cooling properties of ASA (acrylonitrile-styrene-acrylate copolymer)10.1016/j.solmat.2018.02.027 ↗
19. Development of reflective cooling plasticized polyvinyl chloride/precipitated barium sulfate composites for building roof applications throughout entire solar wavebands
20. Photoelectric effect with a twist10.1038/s41566-020-0669-y ↗
21. Development of a modified route for the preparation of BiVO4/ZrO2 composite with tuned heterojunction in it for efficient near-infrared solar reflectance10.1016/j.matchemphys.2023.128397 ↗
22. Aluminium coated carbon nanotube film for wavelength-selective surface10.1063/1.4822305 ↗
23. Surface topography and cooling effects in poly(vinyl chloride) (PVC)/titanium dioxide (TiO2) composites exposed to UV-irradiation10.1007/s13726-018-0671-0 ↗
24. Effect of titanium dioxide (TiO2) on largely improving solar reflectance and cooling property of high density polyethylene (HDPE) by influencing its crystallization behavior10.1016/j.jallcom.2014.07.191 ↗
25. Improving particle size of BaSO4 with a unique glycerol base method and its impact on the negative active material of the lead-acid battery10.1016/j.est.2018.11.003 ↗
26. Synthesis and surface properties of submicron barium sulfate particles10.1016/j.apsusc.2011.07.137 ↗
27. Investigation of the degradation behavior of cyclophosphamide by catalytic ozonation based on Mg(OH)210.3390/en15062274 ↗
28. Aluminum incorporation in TiO2 rutile at high pressure: an XRD and high-resolution 27Al NMR study10.1021/jp202930r ↗
29. Influence of nanoparticles size on XRD patterns for small monodisperse nanoparticles of Cu0 and TiO2 anatase10.1021/acs.iecr.7b04480 ↗
30. Significant improvement in photocatalytic activity by forming homojunction between anatase TiO2 nanosheets and anatase TiO2 nanoparticles10.1016/j.apsusc.2019.05.351 ↗
31. Novel sonochemical green approach for synthesis of highly crystalline and thermally stable barium sulphate nanoparticles using Azadirachta indica leaf extract10.1007/s12034-018-1724-x ↗
32. Synthesis, characterization, and thermal behavior of nanoparticles of Mg(OH)2 to Be used as flame retardants
33. Fluorine modification on titanium dioxide particles: improving the anti-icing performance through a very hydrophobic surface10.1016/j.apsusc.2019.01.073 ↗
34. Effect of titanium dioxide (TiO2) with different crystal forms and surface modifications on cooling property and surface wettability of cool roofing materials10.1016/j.solmat.2017.07.017 ↗
35. Preparation and properties of 4-aminobenzoic acid-modified polyvinyl chloride/titanium dioxide and PVC/TiO2 based nanocomposites membranes
36. Morphology of PA6 nanocomposites prepared by pressurized insertion of aqueous nanoparticle dispersions10.1179/2055033215Y.0000000002 ↗
37. Rheological behaviors of plasticized polyvinyl chloride thermally conductive composites with oriented flaky fillers: a case study on graphite and mica
38. State-of-the-art review on water-based nanofluids for low temperature solar thermal collector application10.1016/j.solmat.2021.111220 ↗
39. Thermal conductance of randomly oriented composites of thin layers10.1016/S0017-9310(99)00387-7 ↗
40. Catalytic dechlorination and charring reaction of polyvinyl chloride by CuAl layered double hydroxide10.1021/acs.energyfuels.7b03271 ↗
41. Influence of hydration time on the hydration of MgO in water and in a magnesium acetate solution10.1007/s10973-008-9095-y ↗
42. Significant improvement of the low-temperature toughness of PVC/ASA/NBR ternary blends through the concept of mismatched thermal expansion coefficient10.1515/polyeng-2019-0192 ↗
43. Magnesium titanate as a new high solar reflectance pigment to fabricate cooling engineering composites for energy saving areas10.1016/j.jallcom.2020.156527 ↗
44. Prospects for applying BaSO4 powders as pigments for spacecraft thermal control coatings10.1016/j.actaastro.2019.09.009 ↗
45. Tuning the bandgap in Co-doped Mg(OH)2 nanoparticles10.1142/S0217979219501820 ↗
46. Fresnel's laws, &ITceteris paribus&IT10.1016/j.shpsa.2017.07.008 ↗
47. Scattering-angle-dependent Christiansen color spectra data of poly(vinyl chloride) (PVC) suspended in styrene liquid and a comprehensive data list of wavelength-dependent refractive indices of PVC10.1016/j.dib.2018.08.101 ↗
48. Investigation of the optical properties of Mg(OH)2 and MgO nanostructures obtained by microwave-assisted methods10.1016/j.jallcom.2012.01.045 ↗
49. Quantitative analysis of diffraction and infra-red spectra of composite cement/BaSO4/Fe3O4 for determining correlation between attenuation coefficient, structural and optical properties10.1016/j.ceramint.2020.04.170 ↗
50. Q-space analysis of scattering by particles: a review10.1016/j.jqsrt.2012.12.029 ↗
51. The effects of particle size distribution on the optical properties of titanium dioxide rutile pigments and their applications in cool non-white coatings10.1016/j.solmat.2014.06.035 ↗
52. Preparation of anhydrous micron CaSO4 with different morphologies from phosphogypsum and its reinforcing in polyvinyl chloride10.1016/j.conbuildmat.2022.130126 ↗