journal article·2024-03Open access

Approach to determining the limiting recombination mechanism in CdTe-based solar cells

Adam B. Phillips, Jared D. Friedl, Kamala Khanal Subedi, Zhaoning Song, Ramez Hosseinian Ahangharnejhad, Abasi Abudulimu, Ebin Bastola, Indra Subedi, Manoj K. Jamarkattel, Zulkifl Hussain, Deng-Bing Li, Nikolas J. Podraza, Yanfa Yan, Randy J. Ellingson, Michael J. Heben

Abstract

Determining exactly how the performance of a thin-film photovoltaic device is limited by a particular recombination mechanism can be difficult, particularly in the case of CdTe solar cells. As a result, efforts are being made to improve all parts of the device without good knowledge of which improvements are necessary. To understand where the device limitation is, the recombination current densities of at least one on of the interfaces must be known. Here, we present a method to determine which recombination mechanisms is limiting. First, back illuminated quantum efficiency measurements are used to determine the key parameters of the back interface – the back surface recombination velocity and the band bending near the back surface. Once these back interface parameters are determined, the recombination current densities can be calculated for a front illuminated device to determine the limiting mechanism. The validity of the approach is tested using previously reported data.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. CdTe-based thin film photovoltaics: recent advances, current challenges and future prospects10.1016/j.solmat.2023.112289 ↗
2. Enhancing the photo-currents of CdTe thin-film solar cells in both short and long wavelength regions10.1063/1.4901532 ↗
3. Sputter-deposited oxides for interface passivation of CdTe photovoltaics10.1109/JPHOTOV.2017.2787021 ↗
4. Solution-processed copper (I) thiocyanate (CuSCN) for highly efficient CdSe/CdTe thin-film solar cells10.1002/pip.3136 ↗
5. Thin-film solar cells with 19% efficiency by thermal evaporation of CdSe and CdTe10.1021/acsenergylett.9b02836 ↗
6. CuSCN as the back contact for efficient ZMO/CdTe solar cells10.3390/ma13081991 ↗
7. Band alignment of front contact layers for high-efficiency CdTe solar cells10.1016/j.solmat.2016.05.050 ↗
8. Polycrystalline CdSeTe/CdTe absorber cells with 28 mA/cm2 short-circuit current10.1109/JPHOTOV.2017.2775139 ↗
9. Indium gallium oxide emitters for high-efficiency CdTe-based solar cells10.1021/acsaem.2c00153 ↗
10. 20%-efficient polycrystalline Cd(Se,Te) thin-film solar cells with compositional gradient near the front junction10.1038/s41467-022-35442-8 ↗
11. Analysis of a novel CuCl2 back contact process for improved stability in CdTe solar cells10.1002/pip.3148 ↗
12. Understanding the interplay between CdSe thickness and Cu doping temperature in CdSe/CdTe devices
13. Exceeding 20% efficiency with in situ group V doping in polycrystalline CdTe solar cells10.1038/s41560-019-0446-7 ↗
14. Arsenic-doped CdSeTe solar cells achieve world record 22.3% efficiency10.1109/JPHOTOV.2023.3282581 ↗
15. Enabling bifacial thin film devices by developing a back surface field using CuxAlOy10.1016/j.nanoen.2021.105827 ↗
16. Bifacial CdTe solar cells with copper chromium oxide back-buffer layer10.1002/solr.202200501 ↗
17. Cracked film lithography with CuGaOx buffers for bifacial CdTe photovoltaics
18. Detailed balance limit of efficiency of p‐n junction solar cells10.1063/1.1736034 ↗
19. The roles of carrier concentration and interface, bulk, and grain-boundary recombination for 25% efficient CdTe solar cells10.1063/1.4984320 ↗
20. Interface engineering for 25% CdTe solar cells
21. Understanding and advancing bifacial thin film solar cells10.1021/acsaem.0c00851 ↗
22. Emitter/absorber interface of CdTe solar cells10.1063/1.4953820 ↗
23. Impact of carrier concentration and carrier lifetime on MgZnO/CdSeTe/CdTe solar cells10.1109/JPHOTOV.2020.3017741 ↗
24. The role of back buffer layers and absorber properties for >25% efficient CdTe solar cells10.1021/acsaem.9b00367 ↗
25. Understanding CdTe performance with engineered front and back interfaces
26. Very high VOC and FF of CdTe thin-film solar cells with the applications of organo-metallic halide perovskite thin film as a hole transport layer10.1002/pip.3309 ↗
27. Identification of recombination losses in CdSe/CdTe solar cells from spectroscopic and microscopic time-resolved photoluminescence10.1002/solr.202170042 ↗
28. Recombination velocity less than 100 cm/s at polycrystalline Al2O3/CdSeTe interfaces10.1063/1.5030870 ↗
29. Dual-wavelength time-resolved photoluminescence study of CdSexTe1-x surface passivation via MgyZn1-yO and Al2O3}10.1109/JPHOTOV.2021.3124169 ↗
30. Bifacial CdTe/CdS solar cell using transparent Nanocomposite (CuS) x (ZnS) 1-x Thin Film as a Back Contact layer
31. Bifacial CdS/CdTe solar cell using transparent barium copper sulfide as a hole transport layer
32. Se diffusion in CdTe thin films for photovoltaics10.1088/1361-6463/abbb47 ↗
33. Reduced recombination and improved performance of CdSe/CdTe solar cells due to Cu migration induced by light soaking10.1021/acsami.1c23937 ↗
34. Polycrystalline CdSeTe/CdTe absorber cells with 28 mA/cm2 short-circuit current10.1109/JPHOTOV.2017.2775139 ↗
35. Understanding the role of CdTe in polycrystalline CdSe x Te1–x/CdTe-graded bilayer photovoltaic devices10.1002/solr.202100523 ↗
36. Numerical modeling of CIGS and CdTe solar cells: setting the baseline
37. Through-the-glass spectroscopic ellipsometry for analysis of CdTe thin-film solar cells in the superstrate configuration10.1002/pip.2759 ↗
38. The role of drift, diffusion, and recombination in time-resolved photoluminescence of CdTe solar cells determined through numerical simulation10.1002/pip.2369 ↗
39. Solution based Cu-doped aluminum oxide as a back interface layer for CdTe solar cells