The effect of storage conditions on the long-term stability of ethylene-vinyl-acetate (EVA) copolymer used in glass/glass modules
Source abstract
Abstract
We evaluate the effect of storage conditions of uncured encapsulant rolls and the potential consequences on photovoltaic (PV) module performance. We show the impact of residual water trapped inside laminated double glass PV modules after lamination and during UV exposure. We focus on ethylene vinyl acetate (EVA) copolymer and its stability over 630 kWh/m2 UV exposure (equivalent to 10 years of outdoor exposure in a Central European country). Three storage conditions were tested by simulating different moisture contents to mimic relative humidity variations that can occur when polymeric foils are exposed to an uncontrolled environment, such as the PV module production line, next to the laminator machine. The presence of water during lamination had no apparent impact on module quality and performance after the fabrication but only became apparent during the aging test. The module power loss was directly related to the EVA chemical and physical degradation and varied depending on the storage history. Results indicate that when the storage is not too harsh, its effect can be somehow mitigated. Based on our observations, we leave a door open to the adoption of high-quality EVA polymers in the manufacturing of glass-glass modules. However, the storage and handling conditions prescribed by the supplier should be carefully respected.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Photovoltaic System Optimization Techniques · Silicon and Solar Cell Technologies · Photovoltaic Systems and Sustainability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Degradation processes and mechanisms of encapsulants
2. The lamination of (multi) crystalline and thin film based photovoltaic modules10.1002/pip.993 ↗
3. Bifacial photovoltaics 2021: status, opportunities and challenges10.3390/en14082076 ↗
4. Characterization of ethylene vinyl acetate (eva) encapsulant: effects of thermal processing and weathering degradation on its discoloration10.1016/0927-0248(92)90013-F ↗
5. Encapsulation of pv modules using ethylene vinyl acetate copolymer as a pottant: a critical review10.1016/0927-0248(95)00150-6 ↗
6. Factors that affect the eva encapsulant discoloration rate upon accelerated exposure10.1016/0927-0248(95)00128-X ↗
7. The causes and effects of degradation of encapsulant ethylene vinyl acetate copolymer (eva) in crystalline silicon photovoltaic modules: a review10.1016/j.rser.2017.06.039 ↗
8. Acetic acid production and glass transition concerns with ethylene-vinyl acetate used in photovoltaic devices10.1016/j.solmat.2006.10.009 ↗
9. Ketola · 2011
10. Uv aging behaviour of ethylene-vinyl acetate copolymers (EVA) with different vinyl acetate contents10.1016/j.polymdegradstab.2010.02.020 ↗
11. Berlin · 2019
12. History of accelerated and qualifcation testing of terrestrial photovoltaic modules: a literature review10.1002/pip.861 ↗
13. Krauter · 2011
14. Photocap®
15. Pv module encapsulation–materials, process, and reliability
16. Fast and non-destructive determination of the eva cross-linking degree for in-line and off-line application
17. The influence of the eva film aging on the degradation behavior of pv modules under high voltage bias in wet conditions followed by electroluminescence10.1109/JPHOTOV.2018.2875196 ↗
18. Reliability and durability impact of high UV transmission EVA for PV modules
19. Reducing uv induced degradation losses of solar modules with c-si solar cells featuring dielectric passivation layers
20. Assessing uvinduced degradation in bifacial modules of different cell technologies
21. Modeling of rates of moisture ingress into photovoltaic modules10.1016/j.solmat.2006.04.002 ↗
22. One‐type‐fits‐all‐systems: strategies for preventing potential‐induced degradation in crystalline silicon solar photovoltaic modules10.1002/pip.3066 ↗
23. In-situ monitoring of moisture ingress in PV modules using digital humidity sensors10.1109/JPHOTOV.2016.2583779 ↗
24. Aspects of the thermal oxidation of ethylene vinyl acetate copolymer10.1016/S0141-3910(00)00020-3 ↗
25. Highly efficient removal of uranium (vi) from wastewater by polyacrylic acid hydrogels10.1039/C6RA26846C ↗
26. Effect of vinyl acetate content on the photovoltaic-encapsulation performance of ethylene vinyl acetate under accelerated ultra-violet aging10.1002/app.48268 ↗
27. Comparison of different microclimate effects on the aging behavior of encapsulation materials used in photovoltaic modules10.1016/j.polymdegradstab.2017.03.010 ↗
28. Damp heat induced physical aging of pv encapsulation materials
29. Effect of UV aging on degradation of ethylenevinyl acetate (EVA) as encapsulant in photovoltaic (pv) modules
30. Effects of artificial ageing tests on eva degradation: influence of microclimate and methodology approach
31. Ehrenstein · 2012
32. Nondestructive 2d-luminescence detection of EVA in aged pv modules: correlation to calorimetric properties, additive distribution and a clue to aging parameters10.1016/j.solmat.2016.09.011 ↗
33. Comparison of degradation behavior of newly developed encapsulation materials for photovoltaic applications under different artificial ageing tests10.3390/polym13020271 ↗