journal article·2023-08Open access

Evaluation of front and backside performances of a large surface organic photovoltaic module under bifacial illumination

Janis Joplim Bezerra Galdino, Olga de Castro Vilela, Naum Fraidenraich, Luis Arturo Gómez-Malagón

Abstract

Semitransparency is one of the attractive characteristics of thin-film solar modules as it allows electricity generation while providing building illumination. However, enhancing transparency can result in lower energy generation efficiency. An effective way to improve energy production in semitransparent modules is through bifacial illumination. This work aims to evaluate, experimentally, and discuss the optical and electrical properties of a commercial, semitransparent organic photovoltaic (OPV) module under bifacial illumination. With that purpose, current-voltage characteristic curves were obtained under the following conditions: a) front, b) rear illumination and c) simultaneous illumination on both faces. The module was placed inside a V-trough cavity to implement electrical measurements with the module's both faces simultaneously illuminated by natural sunlight. Results show that bifacial illumination is an effective way to enhance energy production in semitransparent OPV devices , and a 46% increase in power generation compared to traditional illumination (frontal illumination) was achieved in the experiments. The backside illumination performance differs by over 40%, compared with the front side, due to electrode shading, optics , and differences in the energy conversion processes taking place in the active layer . The OPV module operation under bifacial illumination is equivalent to a parallel connection between the front and backside illumination performances. Optical modeling shows that the active layer absorbs a large part of the incoming light within the cell spectral response . Nevertheless, in the case of frontal illumination, a significant fraction of solar radiation in the visible region is transmitted and remains available, for instance, for building illumination purposes.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · solar cell performance optimization · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Efficiency limits and color of semitransparent organic solar cells for application in building-integrated photovoltaics10.1002/ente.201500131 ↗
2. Net energy and cost-benefit of transparent organic solar cells in building-integrated applications10.1016/j.apenergy.2019.114429 ↗
3. The future of organic photovoltaic solar cells as a direct power source for consumer electronics10.1016/j.solmat.2012.04.001 ↗
4. Indoor light recycling: a new home for organic photovoltaics10.1039/C6TC03344J ↗
5. Is organic photovoltaics promising for indoor applications?10.1063/1.4954268 ↗
6. Organic photovoltaic cells – promising indoor light harvesters for self-sustainable electronics10.1039/C7TA10875C ↗
7. Emerging organic and organic/inorganic hybrid photovoltaic devices for specialty applications: low-level-lighting energy conversion and biomedical treatment
8. Business, market and intellectual property analysis of polymer solar cells10.1016/j.solmat.2010.04.074 ↗
9. Life cycle analyses of organic photovoltaics: a review10.1039/c3ee42653j ↗
10. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
11. Printed semi-transparent large area organic photovoltaic modules with power conversion efficiencies of close to 510.1016/j.orgel.2017.03.013 ↗
12. Guidelines for closing the efficiency gap between hero solar cells and roll-to-roll printed modules10.1002/ente.201402192 ↗
13. Transparent organic photovoltaics: a strategic niche to advance commercialization10.1016/j.joule.2021.07.004 ↗
14. Light harvesting at oblique incidence decoupled from transmission in organic solar cells exhibiting 9.8% efficiency and 50% visible light transparency
15. All slot-die coated non-fullerene organic solar cells with PCE 1110.1002/adfm.202009996 ↗
16. Semi-transparent polymer solar cells with 6% PCE, 25% average visible transmittance and a color rendering index close to 100 for power generating window applications10.1039/c2ee22623e ↗
17. Highly efficient bifacial transparent organic solar cells with power conversion efficiency greater than 3% and transparency of 5010.1016/j.orgel.2012.05.029 ↗
18. Spray-coated silver nanowires as top electrode layer in semitransparent P3HT:PCBM-based organic solar cell devices10.1002/adfm.201202523 ↗
19. Semitransparent polymer solar cells with 5% power conversion efficiency using photonic crystal reflector10.1021/am405274z ↗
20. Semitransparent organic solar cells with organic wavelength dependent reflectors10.1063/1.3546171 ↗
21. A review of transparent solar photovoltaic technologies10.1016/j.rser.2018.06.031 ↗
22. Spray coated silver nanowires as transparent electrodes in OPVs for Building Integrated Photovoltaics applications10.1016/j.solmat.2016.05.053 ↗
23. Space charge region effects in bidirectional illuminated P3HT:PCBM bulk heterojunction photodetectors10.1016/j.orgel.2015.03.027 ↗
24. Factors affecting the performance of bifacial inverted polymer solar cells with a thick photoactive layer10.1021/jp5002836 ↗
25. Development of bifacial inverted polymer solar cells using a conductivity-controlled transparent PEDOT:PSS and a striped Au electrode on the hole collection side10.7567/JJAP.53.02BE07 ↗
26. On the front and back side quantum efficiency differences in semi-transparent organic solar cells and photodiodes10.1063/1.5017030 ↗
27. Top laminated graphene electrode in a semitransparent polymer solar cell by simultaneous thermal annealing/releasing method10.1021/nn201940j ↗
28. The application of highly doped single-layer graphene as the top electrodes of semitransparent organic solar cells10.1021/nn204675r ↗
29. Tailoring spatial distribution of the optical field intensity in semitransparent inverted organic solar cells10.1021/jp201890q ↗
30. A rational method for developing and testing stable flexible indium- and vacuum-free multilayer tandem polymer solar cells comprising up to twelve roll processed layers10.1016/j.solmat.2013.07.006 ↗
31. A review of crystalline silicon bifacial photovoltaic performance characterisation and simulation10.1039/C8EE02184H ↗
32. Bifacial photovoltaic technology: recent advancements, simulation and performance measurement
33. Characteristics of bifacial solar cells under bifacial illumination with various intensity levels10.1002/pip.336 ↗
34. Approaches to an improved IV and QE characterization of bifacial silicon solar cells and the prediction of their module performance10.1016/j.egypro.2011.06.107 ↗
35. Design of a special set-up for the I-V characterization of bifacial photovoltaic solar cells
36. Comparison of double-side and equivalent single-side illumination methods for measuring the I–V characteristics of bifacial photovoltaic devices10.1109/JPHOTOV.2017.2778226 ↗
37. Investigation of performance of P3HT:PCBM organic photovoltaic module under real operating conditions10.1016/j.solener.2019.08.059 ↗
38. Outdoor organic photovoltaic module characteristics: benchmarking against other PV technologies for performance, calculation of Ross coefficient and outdoor stability monitoring10.1016/j.solmat.2017.10.008 ↗
39. Power performance and thermal operation of organic photovoltaic modules in real operating conditions10.1002/pip.3234 ↗
40. Modeling photocurrent action spectra of photovoltaic devices based on organic thin films10.1063/1.370757 ↗
41. Exploiting optical properties of P3HT:PCBM films for organic solar cells with semitransparent anode10.1016/j.tsf.2010.05.021 ↗
42. Open circuit voltage of organic solar cells: an in-depth review10.1039/C5EE02871J ↗
43. Open-circuit voltage in organic solar cells10.1039/c2jm33719c ↗
44. Understanding the light‐intensity dependence of the short‐circuit current of organic solar cells10.1002/adts.202000116 ↗
45. Organic solar cells10.2115/fiber.39.12_P458 ↗
46. Impact of charge transport on current–voltage characteristics and power-conversion efficiency of organic solar cells10.1038/ncomms7951 ↗
47. Effect of leakage current and shunt resistance on the light intensity dependence of organic solar cells10.1063/1.4913589 ↗
48. Origin of the fill factor loss in bulk-heterojunction organic solar cells, Appl
49. Mechanisms controlling the efficiency of polymer solar cells10.1007/s00339-003-2496-7 ↗
50. Nonideal parasitic resistance effects in bulk heterojunction organic solar cells10.1063/1.3494100 ↗
51. Analytical model for the open-circuit voltage and its associated resistance in organic planar heterojunction solar cells10.1103/PhysRevB.77.165332 ↗