Tailoring protective metals for high-efficient and stable dopant-free crystalline silicon solar cells
Source abstract
Abstract
Dopant-free passivating contacts have the potential to be deposited at low costs while exhibiting excellent electrical performance for photovoltaic devices . However, one significant issue of such a technology is the unsatisfactory environmental stability compared to the conventional doped-silicon contacts. Herein, we propose a strategy for improving the stability and the electrical properties of typical electron-selective contacts (ESCs) with a i -a-Si:H/LiF/Al stack by inserting thermally evaporated thin metal films as protective layers. Particularly, Yb, Mg, Ti and Ni materials are investigated in detail to address their electrical behaviors, including contact and passivation properties, as well as their stability under annealing treatments. Finally, the Ti-modified ESC exhibited the highest device performance and the best thermal stability, enabling the development of front and back contacted silicon heterojunction solar cells with a remarkable power conversion efficiency ( PCE ) of 22.14% and maintaining more than 90% of the initial PCE after annealing at 200 °C. The protective metal layer deposited by a facile approach offers a surplus of opportunity to develop high-efficient and cost-effective dopant-free crystalline silicon solar cells .
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. High efficiency n-type Si solar cells on Al2O3-passivated boron emitters10.1063/1.2945287 ↗
2. A roadmap toward 24% efficient PERC solar cells in industrial mass production10.1109/JPHOTOV.2017.2749007 ↗
3. Passivating contacts for crystalline silicon solar cells10.1038/s41560-019-0463-6 ↗
4. Passivating contacts for crystalline silicon solar cells: from concepts and materials to prospects10.1109/JPHOTOV.2018.2797106 ↗
5. Development of new a-Si/c-Si heterojunction solar cells: ACJ-HIT (artificially constructed junction-heterojunction with intrinsic thin-layer)10.1143/JJAP.31.3518 ↗
6. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
7. Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses10.1038/s41560-021-00805-w ↗
8. 2022
9. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 2610.1038/nenergy.2017.32 ↗
10. Progress and future prospects of wide-bandgap metal-compound-based passivating contacts for silicon solar cells10.1002/adma.202200344 ↗
11. Hole selective MoOx contact for silicon solar cells10.1021/nl404389u ↗
12. Carrier population control and surface passivation in solar cells10.1016/j.solmat.2018.04.026 ↗
13. Carrier‐selective contacts using metal compounds for crystalline silicon solar cells10.1002/pip.3552 ↗
14. Dual functional electron-selective contacts based on silicon oxide/magnesium: tailoring heterointerface band structures while maintaining surface passivation10.1002/aenm.201702921 ↗
15. A low resistance calcium/reduced titania passivated contact for high efficiency crystalline silicon solar cells10.1002/aenm.201602606 ↗
16. High-performance TiO2-based electron-selective contacts for crystalline silicon solar cells10.1002/adma.201600926 ↗
17. Heterojunction solar cells with asymmetrically carrier-selective contact structure of molybdenum-oxide/silicon/magnesium-oxide10.1016/j.solener.2017.11.047 ↗
18. Mitigating plasmonic absorption losses at rear electrodes in high‐efficiency silicon solar cells using dopant‐free contact stacks
19. Tantalum nitride electron-selective contact for crystalline silicon solar cells10.1002/aenm.201800608 ↗
20. Dual-function electron-conductive, hole-blocking titanium nitride contacts for efficient silicon solar cells10.1016/j.joule.2019.03.008 ↗
21. Lithium fluoride based electron contacts for high efficiency n-type crystalline silicon solar cells10.1002/aenm.201600241 ↗
22. Magnesium fluoride electron-selective contacts for crystalline silicon solar cells10.1021/acsami.6b03599 ↗
23. Stable electron‐selective contacts for crystalline silicon solar cells enabling efficiency over 21.610.1002/adfm.202005554 ↗
24. High‐performance and stable dopant‐free silicon solar cells with magnesium acetylacetonate electron‐selective contacts10.1002/pssr.202000103 ↗
25. Transition metal oxides for organic electronics: energetics, device physics and applications10.1002/adma.201201630 ↗
26. Wang · 2022
27. Fourteen percent efficiency ultrathin silicon solar cells with improved infrared light management enabled by hole‐selective transition metal oxide full‐area rear passivating contacts10.1002/pip.3510 ↗
28. Transport mechanisms in silicon heterojunction solar cells with molybdenum oxide as a hole transport layer10.1016/j.solmat.2018.05.019 ↗
29. Graphene-on-silicon Schottky junction solar cells10.1002/adma.200904383 ↗
30. Mxene‐contacted silicon solar cells with 11.5% efficiency
31. Solution processed organic/silicon nanowires hybrid heterojunction solar cells using organosilane incorporated poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate) as hole transport layers10.1021/acsnano.0c10526 ↗
32. Performance-enhancing approaches for PEDOT:PSS-si hybrid solar cells10.1002/anie.201910629 ↗
33. 23.5%-efficient silicon heterojunction silicon solar cell using molybdenum oxide as hole-selective contact10.1016/j.nanoen.2020.104495 ↗
34. Dual functional dopant-free contacts with titanium protecting layer: boosting stability while balancing electron transport and recombination losses
35. Achieving 23.83% conversion efficiency in silicon heterojunction solar cell with ultra‐thin MoOx hole collector layer via tailoring (i)a‐Si:H/moox interface
36. Stable dopant-free asymmetric heterocontact silicon solar cells with efficiencies above 2010.1021/acsenergylett.7b01279 ↗
37. Bilayer MoOx/CrOx passivating contact targeting highly stable silicon heterojunction solar cells10.1021/acsami.0c09877 ↗
38. Low-temperature formation of local Al contacts to a-Si:H-passivated Si wafers10.1002/pip.522 ↗
39. Amorphous silicon passivated contacts for diffused junction silicon solar cells10.1063/1.4872262 ↗
40. Interaction of aluminum with hydrogenated amorphous silicon at low temperatures10.1063/1.356039 ↗
41. Elucidation of the layer exchange mechanism in the formation of polycrystalline silicon by aluminum-induced crystallization10.1063/1.373632 ↗
42. Degradation mechanism and stability improvement of dopant-free ZnO/LiFx/Al electron nanocontacts in silicon heterojunction solar cells10.1021/acsanm.0c02475 ↗
43. Luo · 2007
44. Low work function ytterbium silicide contact for doping-free silicon solar cells10.1021/acsaem.0c00256 ↗
45. Metal silicide Schottky barriers on Si and Ge show weaker fermi level pinning
46. Metal contact induced crystallization in films of amorphous silicon and germanium10.1016/0022-3093(72)90267-0 ↗