Bi-layer in-situ phosphorus doped poly-Si films by PECVD for blistering-free high-efficiency industrial TOPCon solar cells
Source abstract
Abstract
The passivating contact concept stands out as one of the most promising and industrially viable photovoltaic (PV) technologies. Further improving the quality of physical contact has become a focus of ongoing research. The film blistering issue has been identified as one of the major bottlenecks for the polysilicon (poly-Si) films deposited by the PECVD approach. In this study, we investigated how the in-situ phosphorus (P) doping level within the poly-Si films contributes to the occurrence of blistering. Our investigations into the film blistering mechanisms reveal that a high in-situ P-doping suppresses hydrogen release levels and reduces the accumulation of residual stress during annealing, which leads to the blistering-free appearance, especially observed in heavily P-doped poly-Si films. However, as excessive P-doping could weaken the interfacial passivation quality, we propose a bi-layer structure of P-doped poly-Si films which allows the doping profile to be tailored and maintain good quality passivating contacts. Based on the bi-layer structure, we fabricated industrial-sized tunnel oxide passivated contact (TOPCon) solar cells, which attained an average efficiency of 23.84%. Our work not only presents a promising strategy for improving the performance of passivating contacts via the PECVD approach but also underscores the significant potential for its widespread implementation in industrial TOPCon solar cell manufacturing.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Tunnel oxide passivated contacts as an alternative to partial rear contacts10.1016/j.solmat.2014.06.015 ↗
2. A passivated rear contact for high-efficiency n-type Si solar cells enabling high VOC's and FF>82
3. Surface passivation of crystalline silicon solar cells: present and future10.1016/j.solmat.2018.06.047 ↗
4. High-efficiency Silicon solar cell: Si/SiO2 interface parameters and their Impact on Device Performance10.1002/pip.4670020402 ↗
5. Impact of phosphorus diffusion on n-type poly-Si based passivated contact silicon solar cells10.1016/j.solmat.2019.110120 ↗
6. Passivation quality control in poly-Si/SiOx/c-Si passivated contact solar cells with 734 mV implied open circuit voltage10.1016/j.solmat.2018.09.013 ↗
7. n-type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
8. Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses10.1038/s41560-021-00805-w ↗
9. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
10. On the limiting efficiency for silicon heterojunction solar cells
11. Ion implantation into amorphous Si layers to form carrier-selective contacts for Si solar cells10.1002/pssr.201409312 ↗
12. Tunnel oxide passivated contacts formed by ion implantation for applications in silicon solar cells10.1063/1.4936223 ↗
13. Silicon-rich silicon carbide hole-selective rear contacts for crystalline-silicon-based solar cells10.1021/acsami.6b12714 ↗
14. Passivating electron contact based on highly crystalline nanostructured silicon oxide layers for silicon solar cells10.1016/j.solmat.2016.06.040 ↗
15. Intrinsic silicon buffer layer improves hole-collecting poly-Si passivating contact10.1002/admi.202000188 ↗
16. Phosphorus diffused LPCVD polysilicon passivated contacts with in-situ low-pressure oxidation10.1016/j.solmat.2018.06.039 ↗
17. Novel schemes of P+ poly-Si hydrogenation implemented in industrial 600 bifacial front-and-rear passivating contacts solar cells
18. monoPoly™ cells: large-area crystalline silicon solar cells with fire-through screen printed contact to doped polysilicon surfaces10.1016/j.solmat.2018.05.059 ↗
19. Implantation-based passivating contacts for crystalline silicon front/rear contacted solar cells10.1002/pip.3250 ↗
20. Atmospheric pressure chemical vapor deposition of in-situ doped amorphous silicon layers for passivating contacts
21. Poly-Si/SiOx/c-Si passivating contact with 738 MV implied open circuit voltage fabricated by hot-wire chemical vapor deposition10.1063/1.5089650 ↗
22. 23% efficient p-type crystalline silicon solar cells with hole-selective passivating contacts based on physical vapor deposition of doped silicon films10.1063/1.5037610 ↗
23. Sputtering of silicon thin films for passivated contacts
24. Compensation of the sputter damage during A-Si deposition for poly-Si/SiOx passivating contacts by ex-situ P-doping
25. Fired-only passivating poly-Si on oxide contacts with DC-sputtered in-situ phosphorous-doped silicon layers
26. Polysilicon passivated junctions: the next technology for silicon solar cells?10.1016/j.joule.2021.02.013 ↗
27. 24.7% industrial tunnel oxide passivated contact solar cells prepared through tube PECVD integrating with plasma-assisted oxygen oxidation and in-situ doped polysilicon10.1016/j.solmat.2023.112396 ↗
28. In-situ phosphorus-doped polysilicon prepared using rapid-thermal anneal (RTA) and its application for polysilicon passivated-contact solar cells10.1016/j.solmat.2020.110518 ↗
29. Polycrystalline silicon passivated tunneling contacts for high-efficiency silicon solar cells10.1557/jmr.2016.77 ↗
30. Influence of precursor a-Si dehydrogenation on the aluminum-induced crystallization process10.1016/j.matchemphys.2014.03.012 ↗
31. Firing-stable PECVD SiOxNy/n-poly-Si surface passivation for silicon solar cells10.1021/acsaem.1c00265 ↗
32. Formation and suppression of hydrogen blisters in tunnelling oxide passivating contact for crystalline silicon solar cells10.1038/s41598-020-66801-4 ↗
33. Highly passivating and blister-free hole selective poly-silicon based contact for large area crystalline silicon solar cells10.1016/j.solmat.2019.109912 ↗
34. High-efficiency N-type silicon solar cells with passivating contacts based on PECVD silicon films doped by phosphorus diffusion10.1016/j.solmat.2019.01.005 ↗
35. Conductivity and surface passivation properties of boron-doped poly-silicon passivated contacts for c-Si solar cells
36. Dual-functional carbon-doped polysilicon films for passivating contact solar cells: regulating physical contacts while promoting photoelectrical properties10.1039/D1EE02011K ↗
37. Passivating contact with phosphorus-doped polycrystalline silicon-nitride with an excellent implied open-circuit voltage of 745 MV and its application in 23.88% efficiency TOPCon solar cells10.1002/solr.202100644 ↗
38. Approaching 23% efficient n-type crystalline silicon solar cells with a silicon oxide-based highly transparent passivating contact10.1016/j.nanoen.2022.107319 ↗
39. Comparison of C-, N-, and O-incorporated non-blistering PECVD Si films for application in SiOx-based passivating contacts for Si solar cells10.1021/acsaem.2c01631 ↗
40. Contactless determination of current-voltage characteristics and minority-carrier lifetimes in semiconductors from quasi-steady-state photoconductance data10.1063/1.117723 ↗
41. Measurement of the emitter saturation current by a contactless photoconductivity decay method
42. Chemical state analysis of heavily phosphorus-doped epitaxial silicon films grown on Si (100) by X-ray photoelectron spectroscopy10.1016/j.apsusc.2018.02.203 ↗
43. Briggs · 1983
44. Chastain · 1992
45. Elemental binding energies for X-ray photoelectron spectroscopy10.1016/0169-4332(95)00027-5 ↗
46. Calculated spin-orbit splittings of some group IV, III-V, and II-VI semiconductors10.1103/PhysRevB.4.1296 ↗
47. Chemical bonding states and dopant redistribution of heavily phosphorus-doped epitaxial silicon films: effects of millisecond laser annealing and doping concentration10.1016/j.apsusc.2019.144447 ↗
48. Measurement of poly-Si film thickness on textured surfaces by X-ray diffraction in poly-Si/SiOx passivating contacts for monocrystalline Si solar cells10.1016/j.solmat.2021.111510 ↗
49. Effect of crystallographic orientation and nanoscale surface morphology on poly-Si/SiOx contacts for silicon solar cells10.1021/acsami.9b11889 ↗
50. Thermal oxidation effect on structural and optical properties of heavily doped phosphorus polycrystalline silicon films10.1007/s00339-011-6332-1 ↗
51. High-resolution characterization of the forbidden Si 200 and Si 222 reflections (in eng)10.1107/S1600576715004732 ↗
52. Interplay of annealing temperature and doping in hole selective rear contacts based on silicon-rich silicon-carbide thin films10.1016/j.solmat.2017.06.039 ↗
53. Experimental determination of the nanocrystalline volume fraction in silicon thin films from Raman spectroscopy10.1063/1.99054 ↗
54. An application of Raman spectroscopy on the measurement of residual stress in porous silicon10.1016/j.optlaseng.2004.09.005 ↗
55. Molecular hydrogen in a-Si:H10.1103/PhysRevLett.85.401 ↗
56. Infrared absorption strength and hydrogen content of hydrogenated amorphous silicon10.1103/PhysRevB.45.13367 ↗
57. Structural interpretation of the vibrational spectra of a-Si: H alloys10.1103/PhysRevB.19.2064 ↗
58. Evolution of microstructure and incorporation of excess hydrogen during the growth of hydrogenated polymorphous silicon at a high rate10.1166/jnn.2017.14281 ↗
59. Amorphous silicon oxide passivation films for silicon heterojunction solar cells studied by hydrogen evolution10.7567/JJAP.53.04ER13 ↗