Inhibiting hysteresis and optimizing the performance of perovskite solar cells
Source abstract
Abstract
We developed a comprehensive Poisson and drift-diffusion solver coupled with a time-dependent ion migration model in the COMSOL simulation software to analyze hysteresis effects and efficiency in perovskite solar cells (PSCs). Initial simulations on PSCs with the structure ITO/SnO 2/CH 3NH 3PbI 3 /Spiro-OMeTAD/Au revealed suboptimal efficiency of 10.31% due to hysteresis loops near the open-circuit voltage (Voc) caused by interface recombination. Next, we explored the influence of the transport layer`s dielectric constant on PSCs performance and hysteresis. The modeling results emphasized the vital role of the transport layer`s dielectric constant in determining PSCs hysteresis and power conversion efficiency (PCE). To investigate further, we replaced the hole transport layer (HTL) material with NiO, CuSCN, and CuI. Studied four different transport layer combinations for n-i-p PSCs: SnO 2-Spiro-OMeTAD, SnO 2–NiO, SnO 2–CuSCN, and SnO 2–CuI. Notably, the SnO 2 –CuSCN combination achieved an impressive efficiency of 21.30%. The p-i-n PSCs with a matched dielectric constant PCBM-PTAA transport layer combination achieves higher PCE. It attains a reverse-scan PCE of up to 21.22% with a fill factor (FF) of 85.04%. Our findings underscore the importance of dielectric constant matching in both electron transport layer (ETL) and HTL, highlighting the potential of SnO 2–CuSCN and PCBM-PTAA as transport layer materials for achieving high efficiency and minimizing hysteresis in PSCs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Perovskite solar cells: an emerging photovoltaic technology10.1016/j.mattod.2014.07.007 ↗
2. Electro-optics of perovskite solar cells10.1038/nphoton.2014.284 ↗
3. Role of cation-mediated recombination in perovskite solar cells
4. Efficient flexible perovskite solar cells using low-cost Cu top and bottom electrodes10.1021/acsami.0c06461 ↗
5. Photovoltaic performance of flexible perovskite solar cells under bending state10.1016/j.solener.2022.08.070 ↗
6. Passivation engineering for hysteresis-free mixed perovskite solar cells
7. How the formation of interfacial charge causes hysteresis in perovskite solar cells10.1039/C8EE01447G ↗
8. Effect of morphology control of light absorbing layer on CH3NH3PbI3 perovskite solar cells10.1166/jnn.2016.12323 ↗
9. Design and simulation of efficient SnS-based solar cell using spiro-OMeTAD as hole transport layer10.3390/nano12142506 ↗
10. Comprehensive study of anomalous hysteresis behavior in perovskite-based solar cells10.1038/s41598-022-19194-5 ↗
11. Polar species for effective dielectric regulation to achieve high‐performance CsPbI3 solar cells10.1002/adma.202202735 ↗
12. TheJ–VHysteresis behavior and solutions in perovskite solar cells10.1002/solr.202000586 ↗
13. Bulk and interface recombination in planar lead halide perovskite solar cells: a Drift-Diffusion study10.1016/j.physe.2017.07.018 ↗
14. Fundamental understanding of photocurrent hysteresis in perovskite solar cells10.1002/aenm.201803017 ↗
15. Effect of interfacial recombination, bulk recombination and carrier mobility on the J-V hysteresis behaviors of perovskite solar cells: a drift-diffusion simulation study10.1039/C9CP03548F ↗
16. Influences of dielectric constant and scan rate on hysteresis effect in perovskite solar cell with simulation and experimental analyses10.1038/s41598-022-11899-x ↗
17. Review on the application of SnO2 in perovskite solar cells10.1002/adfm.201802757 ↗
18. SnO(2) : a wonderful electron transport layer for perovskite solar cells10.1002/smll.201801154 ↗
19. Recent advances in spiro‐MeOTAD hole transport material and its applications in organic–inorganic halide perovskite solar cells
20. Strategies of modifying spiro-OMeTAD materials for perovskite solar cells: a review10.1039/D0TA11564A ↗
21. Exploring the way to approach the efficiency limit of perovskite solar cells by drift-diffusion model10.1021/acsphotonics.6b01043 ↗
22. Inverted hysteresis in CH3NH3PbI3 solar cells: role of stoichiometry and band alignment10.1021/acs.jpclett.7b00571 ↗
23. The detrimental effect of excess mobile ions in planar CH3NH3PbI3 perovskite solar cells10.1039/C6TA05053K ↗
24. Open-circuit voltages exceeding 1.26 V in planar methylammonium lead iodide perovskite solar cells10.1021/acsenergylett.8b01906 ↗
25. Sulfur vacancy defects healing of WS2 quantum dots boosted hole extraction for all-inorganic perovskite solar cells
26. Fully-ambient-air and antisolvent-free-processed stable perovskite solar cells with perovskite-based composites and interface engineering
27. Electron and hole transport layers optimization by numerical simulation of a perovskite solar cell10.1016/j.solener.2019.02.017 ↗
28. Carrier transport layers of tin-based perovskite solar cells10.7498/aps.70.20201219 ↗
29. Investigation of the influence of different hole-transporting materials on the performance of perovskite solar cells10.1016/j.ijleo.2016.10.122 ↗
30. Using hysteresis to predict the charge recombination properties of perovskite solar cells10.1039/D0TA12046D ↗
31. Hysteresis in organic-inorganic hybrid perovskite solar cells10.1016/j.solmat.2016.06.025 ↗
32. Eliminated hysteresis and stabilized power output over 20% in planar heterojunction perovskite solar cells by compositional and surface modifications to the low-temperature-processed TiO2 layer10.1039/C7TA02317K ↗
33. Enhanced electronic properties in mesoporous TiO2 via lithium doping for high-efficiency perovskite solar cells10.1038/ncomms10379 ↗
34. Recent progress in improving strategies of inorganic electron transport layers for perovskite solar cells
35. Understanding the PEDOT:PSS, PTAA and P3CT-X hole-transport-layer-based inverted perovskite solar cells10.3390/polym14040823 ↗
36. Stable efficiency exceeding 20.6% for inverted perovskite solar cells through polymer-optimized PCBM electron-transport layers10.1021/acs.nanolett.9b00936 ↗
37. Efficient perovskite photovoltaic devices using chemically doped PCDTBT as a hole-transport material10.1039/C7TA03103C ↗
38. Hysteresis passivation in planar perovskite solar cells utilizing facile chemical vapor deposition process and PCBM interlayer10.3390/en12234508 ↗