journal article·2023-06Open access

Manganese-substituted kesterite thin-films for earth-abundant photovoltaic applications

Vanira Trifiletti, Luigi Frioni, Giorgio Tseberlidis, Elisa Vitiello, Mati Danilson, Maarja Grossberg, Maurizio Acciarri, Simona Binetti, Stefano Marchionna

Abstract

Thin film photovoltaic devices based on CdTe and Cu(In,Ga)Se2 find in Cu2ZnSn(S,Se)4-based technology a more eco-friendly alternative. To further reduce production costs and improve sustainability, other abundant metals, such as manganese, can be tested as a potential alternative to zinc. Mn is a safe and Earth-abundant element, and it can be used in light absorber materials when it is part of quaternary chalcogenides with copper and tin. This work reports on the growth and characterization of Cu2MnSnS4 thin films produced by a two-step deposition process. The metallic precursors have been deposited by sputtering and the stack annealed at high temperatures in sulphur atmosphere. The layers, obtained in Cu-poor Mn-poor compositional regime, have been tested in solar devices with a record efficiency of 1.13% and a high open-circuit voltage of about 445 mV delivered by the champion device after over one year from the first PV measurement. X-ray diffraction and X-ray photoelectron, Raman, photoluminescence, and admittance spectroscopies have been used to investigate the Cu2MnSnS4 defectivity, and a scenario of high defects has emerged. Therefore, to promote the development of Mn-based photovoltaics the synthesis methodology should be optimized and the device architecture should be specifically designed for the compound.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (93)

Show source-provided references
1. Topic · 2022
2. 2022
3. An evaluation for CIGS based thin-film solar cells development
4. Life cycle assessment of different chalcogenide thin-film solar cells10.1016/j.apenergy.2022.118888 ↗
5. Performance evaluation of flexible CIGS modules based on operational data under outdoor conditions10.1002/ese3.1040 ↗
6. Progress and perspectives of thin film kesterite photovoltaic technology: a critical review10.1002/adma.201806692 ↗
7. New earth-abundant thin film solar cells based on chalcogenides10.3389/fchem.2019.00297 ↗
8. Kesterite solar cells: insights into current strategies and challenges
9. Raw material needs for the large-scale deployment of photovoltaics – effects of innovation-driven roadmaps on material constraints until 205010.1016/j.rser.2020.110589 ↗
10. First principles calculation of the electronic-optical properties of Cu2MgSn(SxSe1−x)410.1007/s11801-020-9042-0 ↗
11. The role of tuning Se/(S + Se) ratio in the improvement of Cu2MnSn(S, Se)4 thin films properties and photovoltaic device performance10.1016/j.solener.2018.12.076 ↗
12. A promising photovoltaic material Cu2MnSn(S,Se)4: film growth and its application in solar cell10.1016/j.solmat.2020.110788 ↗
13. Conversion of light to electricity by cis-X2bis(2,2'-bipyridyl-4,4'-dicarboxylate)ruthenium(II) charge-transfer sensitizers (X = Cl-, Br-, I-, CN-, and SCN-) on nanocrystalline titanium dioxide electrodes10.1021/ja00067a063 ↗
14. Efficient optimization of the performance of Mn2+-doped kesterite solar cell: machine learning aided synthesis of high efficient Cu2(Mn,Zn)Sn(S,Se)4 solar cells
15. Current challenges and future prospects for a highly efficient (>20%) kesterite CZTS solar cell: a review10.1016/j.solmat.2019.03.001 ↗
16. Investigations on the effect of buffer layer on CMTS based thin film solar cell using SCAPS 1-D10.1016/j.optmat.2022.112150 ↗
17. A general strategy for synthesis of quaternary semiconductor Cu2MSnS4 (M = Co2+, Fe2+, Ni2+, Mn2+) nanocrystals10.1039/c2jm33574c ↗
18. Photocatalytic and thermoelectric properties of Cu2MnSnS4 nanoparticles synthesized via solvothermal method10.1016/j.matlet.2016.09.018 ↗
19. Highly crystalline stannite-phase Cu2XSnS4 (X = Mn, Fe, Co, Ni, Zn and Cd) nanoflower counter electrodes for ZnO-based dye-sensitised solar cells10.1016/j.jallcom.2016.12.043 ↗
20. Dilute magnetic semiconductor Cu2MnSnS4 nanocrystals with a novel zincblende and wurtzite structure10.1039/c2ra20198d ↗
21. The effects of temperature and frequency changes on the electrical characteristics of hot-injected Cu2MnSnS4 chalcogenide-based heterojunction10.1016/j.physb.2019.411821 ↗
22. Synthesis and characterization of earth-abundant Cu2MnSnS4 thin films using a non-toxic solution-based technique10.1039/C5RA14595C ↗
23. Comparing the effect of Mn substitution in sulfide and sulfoselenide-based kesterite solar cells10.1002/solr.201900521 ↗
24. Influence of annealing temperature on structural and optical properties of Cu2MnSnS4 thin films fabricated by sol–gel technique10.1016/j.jallcom.2015.03.225 ↗
25. Chen · 2015 · 39
26. Improving the charge separation and collection at the buffer/absorber interface by double-layered Mn-substituted CZTS10.1016/j.solmat.2018.05.052 ↗
27. Synthesis of magnetic doped kesterite single crystals10.1002/crat.201400435 ↗
28. A comparative study of cu2mnsns4 thin films synthesized via different chemical methods, Optoelectronics and Advanced Materials
29. Growth and characterization of pure stannite Cu2MnSnS4 thin films deposited by dip-coating technique10.1007/s00339-021-04824-y ↗
30. Photovoltaic effect in earth abundant solution processed Cu2MnSnS4 and Cu2MnSn(S,Se)4 thin films10.1016/j.solmat.2016.07.006 ↗
31. Electrical and optical properties of Cu2Zn(Fe,Mn)SnS4 films prepared by spray pyrolysis10.1134/S1063784218020238 ↗
32. Growth and characterization of Cu2MnSnS4 thin films synthesized by spray pyrolysis under air atmosphere10.3390/coatings10100963 ↗
33. Optical characterizations of quaternary Cu2MnSnS4 thin films: novel synthesis process of film samples by spray pyrolysis technique10.1016/j.physb.2020.412110 ↗
34. Growth of Cu2MnSnS4 PV absorbers by sulfurization of evaporated precursors10.1016/j.jallcom.2016.09.176 ↗
35. Structural and electronic properties of Cu2MnSnS4 from experiment and first-principles calculations10.1002/pssb.201800743 ↗
36. Synthesis of Cu2MnSnS4 thin film deposited on seeded fluorine doped tin oxide substrate via a green and low-cost electrodeposition method10.1016/j.matlet.2016.12.067 ↗
37. Improvement performance of two-step electrodepositing Cu2MnSnS4 thin film solar cells by tuning Cu-Sn alloy layer deposition time10.1016/j.matchemphys.2018.03.009 ↗
38. Hydrothermal synthesis of tetragonal and wurtzite Cu2MnSnS4 nanostructures for multiple applications: influence of different sulfur reactants on growth and properties10.1016/j.mssp.2020.105438 ↗
39. Effect of a sulfur precursor on the hydrothermal synthesis of Cu2MnSnS410.3390/ma14133457 ↗
40. Relevant efficiency enhancement of emerging Cu2MnSnS4 thin film solar cells by low temperature annealing10.1016/j.solener.2017.03.087 ↗
41. Cu2ZnSnS4 solar cells grown by sulphurisation of sputtered metal precursors10.1016/j.tsf.2013.06.084 ↗
42. Optical properties and electronic structure of amorphous germanium10.1002/pssb.19660150224 ↗
43. Effects of CdS buffer layers on photoluminescence properties of Cu2ZnSnS4 solar cells
44. Semi-transparent Cu2ZnSnS4 solar cells by drop-casting of sol-gel ink10.1016/j.solener.2021.05.073 ↗
45. Kesterite solar-cells by drop-casting of inorganic sol–gel inks10.1016/j.solener.2020.07.093 ↗
46. The influence of the composition ratio on CZTS-based thin film solar cells
47. Deep electron traps and origin of $p$-type conductivity in the earth-abundant solar-cell material Cu2ZnSnS410.1103/PhysRevB.87.155206 ↗
48. From kesterite to stannite photovoltaics: stability and band gaps of the Cu2(Zn,Fe)SnS4 alloy10.1063/1.4862030 ↗
49. The effect of ZnS segregation on Zn-rich CZTS thin film solar cells10.1016/j.jallcom.2015.01.205 ↗
50. Smigelskas · 1947
51. Some new sulfo-spinels containing iron-group transition metals10.1016/0025-5408(73)90020-2 ↗
52. Study of polycrystalline Cu2ZnSnS4 films by Raman scattering10.1016/j.jallcom.2011.04.097 ↗
53. Characteristics and optimization of ZnO/CdS/CZTS photovoltaicsolar cell10.1007/s00339-018-1626-1 ↗
54. Etching process optimization of non-vacuum fabricated Cu2ZnSnS4 solar cell10.1007/s10854-020-02925-7 ↗
55. Effect of post annealing thermal heating on Cu2ZnSnS4 solar cells processed by sputtering technique10.1016/j.solener.2022.04.002 ↗
56. Titania as buffer layer for Cd-free kesterite solar cells
57. Complex surface chemistry of kesterites: Cu/Zn reordering after low temperature postdeposition annealing and its role in high performance devices10.1021/acs.chemmater.5b01473 ↗
58. Interface engineering of CdS/CZTSSe heterojunctions for enhancing the Cu2ZnSn(S,Se)4 solar cell efficiency10.1016/j.mtener.2019.05.015 ↗
59. Cu2ZnSnS4 solar cells with over 10% power conversion efficiency enabled by heterojunction heat treatment10.1038/s41560-018-0206-0 ↗
60. Spectral responses in quantum efficiency of emerging kesterite thin-film solar cells
61. Aging effect on the efficiency of Cu(In,Ga)Se2/CdS solar cells10.1007/s13391-015-5007-z ↗
62. Ott · 2013
63. Molecular doping for hole transporting materials in hybrid perovskite solar cells
64. The physics of the solar cell, in: Handbook of Photovoltaic Science and Engineering, pp. 82-129.
65. Does the low-temperature Arrhenius plot of the photoluminescence intensity in CdTe point towards an erroneous activation energy?10.1063/1.363903 ↗
66. Effect of germanium incorporation on the properties of kesterite Cu2ZnSn(S,Se)4 monograins10.1016/j.tsf.2018.11.020 ↗
67. Photoluminescence study of deep donor- deep acceptor pairs in Cu2ZnSnS410.1016/j.mssp.2018.02.025 ↗
68. Photoluminescence study of defect clusters in Cu2ZnSnS4 polycrystals10.1016/j.cap.2013.12.029 ↗
69. Photoluminescence study and observation of unusual optical transitions in Cu2ZnSnSe4/CdS/ZnO solar cells10.1016/j.solmat.2014.10.041 ↗
70. Review article on the lattice defect and interface loss mechanisms in kesterite materials and their impact on solar cell performance10.1016/j.solener.2021.10.005 ↗
71. A low-temperature order-disorder transition in Cu2ZnSnS4 thin films10.1063/1.4863685 ↗
72. Cu–Zn disorder and band gap fluctuations in Cu2ZnSn(S,Se)4: theoretical and experimental investigations10.1002/pssb.201552530 ↗
73. Engineering solar cell absorbers by exploring the band alignment and defect disparity: the case of Cu- and Ag-based kesterite compounds10.1002/adfm.201502272 ↗
74. The effect of Ag alloying of Cu2(Zn,Cd)SnS4 on the monograin powder properties and solar cell performance10.1039/C9TA07768E ↗
75. Electronic and optical properties of Cu2XSnS4 (X = Be, Mg, Ca, Mn, Fe, and Ni) and the impact of native defect pairs10.1063/1.4984115 ↗
76. Strategic improvement of Cu2MnSnS4 films by two distinct post-annealing processes for constructing thin film solar cells10.1016/j.actamat.2016.02.057 ↗
77. Effect of substrate temperature on growth and properties of Cu2MnSnS4 thin films prepared by chemical spray pyrolysis10.1007/s10854-018-00658-2 ↗
78. Reducing the interfacial defect density of CZTSSe solar cells by Mn substitution10.1039/C7TA09668B ↗
79. Nanoporous Mn-based electrocatalysts through thermal conversion of cyano-bridged coordination polymers toward ultra-high efficiency hydrogen peroxide production10.1039/C6TA01470D ↗
80. Three-dimensional radial α-MnO2 synthesized from different redox potential for bifunctional oxygen electrocatalytic activities10.1016/j.jpowsour.2017.07.027 ↗
81. Synthesis and characterization of α-MnO2 nanoneedles for electrochemical supercapacitors10.1016/j.electacta.2017.12.118 ↗
82. XPS determination of Mn oxidation states in Mn (hydr)oxides10.1016/j.apsusc.2015.12.159 ↗
83. Copper sulfide nanocrystals with tunable composition by reduction of covellite nanocrystals with Cu+ ions10.1021/ja409754v ↗
84. Effect of sulfurization conditions on structural and electrical properties of copper sulfide films10.1063/1.2903599 ↗
85. The evolution of α-MnO2 from hollow cubes to hollow spheres and their electrochemical performance for supercapacitors10.1007/s10853-017-1116-4 ↗
86. Facile synthesis and optical band gap calculation of Mn3O4 nanoparticles10.1016/j.matchemphys.2012.09.068 ↗
87. Optical properties and spectroscopic investigation of single phase tetragonal Mn3O4 nanoparticles10.1016/j.matpr.2020.02.238 ↗
88. MnO2-Based materials for environmental applications
89. Thin films of sodium birnessite-type MnO2: optical properties, electronic band structure, and solar photoelectrochemistry10.1021/jp200015p ↗
90. Detailed insight into the CZTS/CdS interface modification by air annealing in monograin layer solar cells10.1021/acsaem.1c02186 ↗
91. Bias-dependent admittance spectroscopy of thin-film solar cells: experiment and simulation10.1109/JPHOTOV.2020.2992350 ↗
92. Growth and characterization of Cu2Zn1−xFexSnS4 thin films for photovoltaic applications10.3390/ma13061471 ↗
93. Strategic review of secondary phases, defects and defect-complexes in kesterite CZTS-Se solar cells10.1039/C5EE02153G ↗