Effect of out-gassing from polymeric encapsulant materials on the lifetime of perovskite solar cells
Source abstract
Abstract
Perovskite solar cells (PSCs) have emerged as an exciting thin-film photovoltaic (PV) technology due to their high efficiency and applicability for low-cost roll-to-roll fabrication. The progression of this technology towards commercialization requires a concerted effort to understand and address the degradation mechanisms currently hindering the longevity of PSCs. Cell instability in the presence of ambient moisture and oxygen is a dominating factor undermining their operational lifetime and thus the development of encapsulation materials and processes is central to addressing this instability. Herein, we report the results of a study on the effect of flexible encapsulant pre-conditioning (drying) on the durability of five PSC types with varying perovskite composition and device architecture. Performance testing over 1500 h revealed that two of the three conventionally structured (n-i-p) PSC devices were stable irrespective of moisture-content level in the barrier materials, whereas both inverted (p-i-n) device types suffered significant degradation when encapsulated with barrier materials without pre-conditioning. The incident photon-to-current conversion efficiency measurements and spectroscopic impedance analysis of the encapsulated devices demonstrated the extent to which out-gassing can impact the interfacial electrical properties of the PSCs. This study reveals the critical importance of appropriate conditioning treatments of flexible encapsulant materials prior to encapsulation for achieving optimal long-term stability of PSCs.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
2. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
3. Perovskite-perovskite tandem photovoltaics with optimized band gaps10.1126/science.aaf9717 ↗
4. Two-inch-sized perovskite CH3 NH3 PbX3 (X = Cl, Br, I) crystals: growth and characterization10.1002/adma.201502597 ↗
5. Solar cells. Electron-hole diffusion lengths > 175 mum in solution-grown CH3NH3PbI3 single crystals10.1126/science.aaa5760 ↗
6. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
7. 2022
8. Methylammonium chloride induces intermediate phase stabilization for efficient perovskite solar cells10.1016/j.joule.2019.06.014 ↗
9. Chemical management for colorful, efficient, and stable inorganic–organic hybrid nanostructured solar cells10.1021/nl400349b ↗
10. Halide perovskite photovoltaics: background, status, and future prospects10.1021/acs.chemrev.8b00539 ↗
11. Inorganic caesium lead iodide perovskite solar cells10.1039/C5TA06398A ↗
12. Towards commercialization: the operational stability of perovskite solar cells10.1039/D0CS00573H ↗
13. Recent progress on the long-term stability of perovskite solar cells10.1002/advs.201700387 ↗
14. Understanding degradation mechanisms and improving stability of perovskite photovoltaics10.1021/acs.chemrev.8b00336 ↗
15. Impact of H2O on organic-inorganic hybrid perovskite solar cells10.1039/C7EE01674C ↗
16. Stability of perovskite solar cells10.1016/j.solmat.2015.12.025 ↗
17. Encapsulation for long-term stability enhancement of perovskite solar cells10.1016/j.nanoen.2016.09.041 ↗
18. A layered hybrid perovskite solar-cell absorber with enhanced moisture stability10.1002/anie.201406466 ↗
19. Study on the stability of CH3NH3PbI3 films and the effect of post-modification by aluminum oxide in all-solid-state hybrid solar cells10.1039/C3TA13606J ↗
20. Morphology modification of perovskite film by a simple post-treatment process in perovskite solar cell10.1016/j.mseb.2017.01.004 ↗
21. Compositional engineering of perovskite materials for high-performance solar cells10.1038/nature14133 ↗
22. Mixed-organic-cation perovskite photovoltaics for enhanced solar-light harvesting10.1002/anie.201309361 ↗
23. A holistic approach to interface stabilization for efficient perovskite solar modules with over 2,000-hour operational stability10.1038/s41560-020-0653-2 ↗
24. Stabilizing the efficiency beyond 20% with a mixed cation perovskite solar cell fabricated in ambient air under controlled humidity10.1002/aenm.201700677 ↗
25. Millimeter-sized clusters of triple cation perovskite enables highly efficient and reproducible roll-to-roll fabricated inverted perovskite solar cells10.1002/adfm.202110700 ↗
26. 2D homologous perovskites as light-absorbing materials for solar cell applications10.1021/jacs.5b03796 ↗
27. Crystallisation control of drop-cast quasi-2D/3D perovskite layers for efficient solar cells10.1038/s43246-020-0036-z ↗
28. Enhanced efficiency and thermal stability of mesoscopic perovskite solar cells by adding PC70BM acceptor10.1016/j.solmat.2019.110130 ↗
29. A review on emerging barrier materials and encapsulation strategies for flexible perovskite and organic photovoltaics10.1002/aenm.202101383 ↗
30. Encapsulation for improving the lifetime of flexible perovskite solar cells10.1016/j.nanoen.2015.10.006 ↗
31. Low-temperature and corrosion-resistant gas diffusion multibarrier with UV and heat rejection capability-A strategy to ensure reliability of organic electronics10.1021/acsami.9b02268 ↗
32. Edge sealing for low cost stability enhancement of roll-to-roll processed flexible polymer solar cell modules10.1016/j.solmat.2011.09.064 ↗
33. Comparison of UV-curing, hotmelt, and pressure sensitive adhesive as roll-to-roll encapsulation methods for polymer solar cells10.1002/adem.201300172 ↗
34. Hermetic seal for perovskite solar cells: an improved plasma enhanced atomic layer deposition encapsulation10.1016/j.nanoen.2019.104375 ↗
35. Prolonged lifetime of perovskite solar cells using a moisture-blocked and temperature-controlled encapsulation system comprising a phase change material as a cooling agent10.1021/acsomega.9b03407 ↗
36. Versatile perovskite solar cell encapsulation by low-temperature ALD-Al2O3 with long-term stability improvement10.1039/C8SE00282G ↗
37. Oxygen-induced doping of spiro-MeOTAD in solid-state dye-sensitized solar cells and its impact on device performance10.1021/nl302509q ↗
38. Origins of the s-shape characteristic in J–V curve of inverted-type perovskite solar cells
39. Theory of impedance and capacitance spectroscopy of solar cells with dielectric relaxation, drift-diffusion transport, and recombination10.1021/jp5062144 ↗
40. Beyond impedance spectroscopy of perovskite solar cells: insights from the spectral correlation of the electrooptical frequency techniques10.1021/acs.jpclett.0c02459 ↗
41. Light-induced space-charge accumulation zone as photovoltaic mechanism in perovskite solar cells10.1021/acs.jpclett.5b02810 ↗