journal article·2022-03

Parametric analysis of random subwavelength structures with anti-reflective properties on glass applied to photovoltaics

Cristina L. Pinto, Iñaki Cornago, Alicia Buceta, Eugenia Zugasti, Jaione Bengoechea

Publisher page

Abstract

Randomly distributed subwavelength structures (SWSs) have been fabricated on one side of borosilicate glass samples using one-step self-masking reactive ion etching (RIE) process. These samples have been optically and topologically characterized by means of a spectrophotometer and a scanning electron microscope (SEM), respectively. The random SWSs exhibit excellent broadband anti-reflective properties from the ultraviolet to the near infrared spectral region, showing a relative reflectance decrease of 2.9%, averaged between 300 nm and 1200 nm. This reflectance reduction resulted from a gradual refractive index change from air to the glass substrate which, effectively suppressed Fresnel reflection, as described by the effective medium theory. In addition, these SWSs have been modelled and the influence of their main topological parameters on the anti-reflective response has been analysed using rigorous coupled wave analysis (RCWA) method-based simulation tool. Nanostructure’s average height, height distribution, randomness and geometry have been varied, and the acquired omnidirectional behaviour has been analysed and compared between each other as a way to choose the best SWS. Moreover, to analyse the possible photovoltaic application of these structured glasses, the theoretical photo-generated short circuit current density has been calculated for the best SWS studied. The obtained theoretical results have been consistent with the experimentally obtained data validating the presented model.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Optical Coatings and Gratings · Photonic Crystals and Applications · Surface Roughness and Optical Measurements

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. V.P. Equipment, International Technology Roadmap for Photovoltaic (ITRPV), September, 2020.
2. von Fraunhofer · 1888
3. Macleod · 2010
4. IV. ON the intensity of light reflected from certain surfaces at nearly perpendicular incidence
5. Anti-reflective coating materials: a holistic review from PV perspective10.3390/en13102631 ↗
6. High performance single layer nano-porous antireflection coatings on glass by sol-gel process for solar energy applications10.1016/j.solmat.2015.03.023 ↗
7. Anti-reflection (AR) coatings made by sol-gel processes: a review10.1016/S0927-0248(00)00365-2 ↗
8. A review of anti-reflection and self-cleaning coatings on photovoltaic panels10.1016/j.solener.2020.01.084 ↗
9. Ilse · 2018
10. Performance of different anti-reflective coated glass for PV modules
11. C. Völker, D. Philipp, M. Masche, T. Kaltenbach, Development of a test method for the investigation of the abrasive effect of sand particles on components of solar energy systems, in: Proc 29th Eu PV Solar Energy Conf, 2014.
12. Resilience of industrial PV module glass coatings to cleaning processes10.1063/5.0024452 ↗
13. Biomimetic antireflection surfaces
14. Anti-reflecting and photonic nanostructures10.1016/j.mser.2010.04.001 ↗
15. Enhanced power generation in concentrated photovoltaics using broadband antireflective coverglasses with moth eye structures10.1364/OE.20.00A916 ↗
16. The role of random nanostructures for the omnidirectional anti-reflection properties of the glasswing butterfly10.1038/ncomms7909 ↗
17. Anti-reflective coatings: A critical, in-depth review10.1039/c1ee01297e ↗
18. Ascendant bioinspired antireflective materials: Opportunities and challenges coexist10.1016/j.pmatsci.2019.01.004 ↗
19. Antireflection behavior of silicon subwavelength periodic structures for visible light10.1088/0957-4484/8/2/002 ↗
20. Fabrication of antireflective nanostructures on a transmission grating surface using a one-step self-masking method10.3390/nano9020180 ↗
21. Rapid fabrication of antireflective pyramid structure on polystyrene film used as protective layer of solar cell10.1016/j.solmat.2017.06.013 ↗
22. Susceptibility of CPV optical materials to abrasion10.1063/1.5124201 ↗
23. Artificial linear brush abrasion of coatings for photovoltaic module first-surfaces10.1016/j.solmat.2020.110757 ↗
24. Diffraction efficiency performance of random anti-reflecting subwavelength surface structures on prefabricated fused silica binary gratings10.1364/AO.57.004421 ↗
25. A practical superhydrophilic self cleaning and antireflective surface for outdoor photovoltaic applications10.1016/j.solmat.2011.10.011 ↗
26. Enhancement of optical transmission with random nanohole structures10.1364/OE.19.000A35 ↗
27. Self-cleaning and antireflective packaging glass for solar modules10.1016/j.renene.2011.02.017 ↗
28. Formation of broadband antireflective and superhydrophilic subwavelength structures on fused silica using one-step self-masking reactive ion etching10.1038/srep13023 ↗
29. E. Zugasti, J. Bengoechea, A. Turumbay, M.J. Rodríguez, A.R. Lagunas, Anti-reflective properties of reactive ion etched glasses, in: 35th European Photovoltaic Solar Energy Conference and Exhibition, 2018, pp. 1–6.
30. Colours in metal glasses and in metallic films
31. Reactive ion etching of glasses: Composition dependence10.1016/S0168-583X(03)00517-2 ↗
32. The optical properties of’moth eye’antireflection surfaces10.1080/713820946 ↗
33. IEC 60904-3:2019 — Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data, third ed. https://webstore.iec.ch/publication/61084.