Spontaneous phase separation of a zinc oxide interfacial layer in bulk heterojunction organic photovoltaics
Source abstract
Abstract
Abstract An interfacial layer and active layer were simultaneously fabricated through a facile one-step process using a blended solution of zinc oxide (ZnO) sol-gel as the interfacial material, and P3HT:PCBM (poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric methyl ester) as the photoactive components. The resultant devices based on the one-step process exhibited a favourable 3.56% power conversion efficiency (PCE) after a simple UV light treatment, close to the PCE of a conventionally fabricated reference device with a multilayer architecture. Using a combination of surface morphology analysis and investigation of the vertical component distribution, we confirmed that a spontaneous and significant phase separation between the ZnO and the photoactive materials occurred during the spin coating and sequential thermal annealing processes. This resulted in the automatic formation of an enriched ZnO interfacial layer at the ITO surface. The work function of the ZnO layer deposited by the one-step process on the ITO substrate was 3.76 eV, consistent with conventionally formed ZnO layers. Furthermore, the performance of the device fabricated by the one-step process demonstrated superior stability under light exposure. This successful demonstration of organic photovoltaics (OPVs) using the one-step process is an important step towards the realization of high performance, roll-to-roll compatible OPVs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Efficient polymer solar cells based on benzothiadiazole and alkylphenyl substituted benzodithiophene with a power conversion efficiency over 8%10.1002/adma.201301494 ↗
2. Stability of polymer solar cells10.1002/adma.201104187 ↗
3. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
4. Fabrication of organic bulk heterojucntion solar cells by a spray deposition method for low-cost power generation10.1063/1.2772766 ↗
5. Successive solvent-treated PEDOT:PSS electrodes for flexible ITO-free organic photovoltaics10.1016/j.solmat.2013.02.031 ↗
6. Morphologic improvement of the PBDTTT-C and PC71BM blend film with mixed solvent for high-performance inverted polymer solar cells10.1088/0957-4484/24/48/484009 ↗
7. Air-stable inverted structure of hybrid solar cells using a cesium-doped ZnO electron transport layer prepared by a sol-gel process10.1039/c3ta12425h ↗
8. Inverted organic solar cells with TiOx cathode and graphene oxide anode buffer layers10.1016/j.solmat.2012.09.032 ↗
9. Sulfonic acid-functionalized, reduced graphene oxide as an advanced interfacial material leading to donor polymer-independent high-performance polymer solar cells10.1039/C3TA13647G ↗
10. Interface materials for organic solar cells10.1039/b921624c ↗
11. Chlorinated indium tin oxide electrodes with high work function for organic device compatibility10.1126/science.1202992 ↗
12. Surface-initiated phase separation-fabrication of two-layer organic light-emitting devices in a single processing step10.1002/adma.201102368 ↗
13. Self-organized buffer layers in organic solar cells10.1002/adma.200792876 ↗
14. Organic solar cells fabricated by one step deposition of a bulk heterojunction mixture and TiO2 NiO hole-collecting agents10.1021/jp302351h ↗
15. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
16. Inverted polymer solar cells integrated with a low-temperature-annealed sol-gel-derived ZnO Film as an electron transport layer10.1002/adma.201004301 ↗
17. Enhancing functionality of ZnO hole blocking layer in organic photovoltaics10.1016/j.solmat.2011.11.026 ↗
18. Light-soaking issue in polymer solar cells: photoinduced energy level alignment at the sol-gel processed metal oxide and indium tin oxide interface10.1063/1.4728173 ↗
19. Angle dependence of external and internal quantum efficiencies in bulk-heterojunction organic solar cells10.1063/1.2777724 ↗
20. Can the incident photo-to-electron conversion efficiency be used to calculate short-circuit density of dye-sensitized solar cells10.1016/j.cap.2011.03.060 ↗
21. Roll-to-roll processed polymer tandem solar cells partially processed from water10.1016/j.solmat.2011.08.025 ↗
22. All-sputtered contacts for organic solar cells10.1016/j.tsf.2007.12.036 ↗
23. The influence of the solvent evaporation rate on the phase separation and electrical performances of soluble acene-polymer blend semiconductors10.1002/adfm.201101159 ↗
24. Sol–gel-deposited ZnO thin films: a review10.1016/j.mseb.2010.07.001 ↗
25. Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends10.1038/nmat2102 ↗
26. ZnO nano-ridge structure and its application in inverted polymer solar cell10.1016/j.orgel.2009.08.011 ↗
27. Role of additional PCBM layer between ZnO and photoactive layers in inverted bulk- heterojunction solar cells10.1038/srep04306 ↗
28. X-ray photoelectron spectroscopy and auger electron spectroscopy studies of Al-doped ZnO films10.1016/S0169-4332(99)00601-7 ↗
29. Energetics of intrinsic defects and their complexes in ZnO investigated by density functional calculations10.1103/PhysRevB.83.045206 ↗
30. Sol-gel preparation of ZnO films with extremely preferred orientation along (002) plane from zinc acetate solution10.1016/S0040-6090(97)00231-9 ↗
31. Sol – Gel preparation of transparent and conductive aluminum-doped zinc oxide films with highly preferential crystal orientation10.1111/j.1151-2916.1998.tb02524.x ↗
32. Electronic memory effects in diodes of zinc oxide nanoparticles in a matrix of polystyrene or poly(3-hexylthiophene)10.1063/1.2794475 ↗
33. Electrical and photo-induced degradation of ZnO layers in organic photovoltaics10.1002/aenm.201100227 ↗