journal article·2025-04Open access

Unveiling the degradation mechanisms in silicon heterojunction solar cells under accelerated damp-heat testing

Xinyuan Wu, Xutao Wang, Ruirui Lv, Hao Song, Yuanjie Yu, Chandany Sen, Yuhao Cheng, Muhammad Umair Khan, Alison Ciesla, Tao Xu, Guangchun Zhang, Bram Hoex

Abstract

Silicon heterojunction (SHJ) solar cells have become one of the mainstream solar cells in the current photovoltaic market due to their high efficiency. Still, concerns about their long-term reliability are seen as a potential issue restricting further marketisation. In particular, the sensitivity of silicon heterojunction solar cells to high temperatures and moisture is a concern. Sodium (Na) in combination with humidity is widely considered one of the causes of degradation in silicon heterojunction solar cells. Yet, a comprehensive understanding of the mechanisms behind Na-induced decay remains lacking. This study will investigate humidity-induced degradation of industrial SHJ solar cells at elevated temperatures using various sodium-containing salts [sodium bicarbonate (NaHCO 3 ), sodium chloride (NaCl), and sodium nitrate (NaNO 3 )] to improve our fundamental understanding of Na-induced degradation. We will show that SHJ solar cells exposed to NaHCO 3 and NaCl show a significant reduction in efficiency, while solar cells exposed to NaNO 3 show minimal degradation. Further analysis indicates that NaHCO 3 may interact with the transparent conductive oxide (TCO) layer, leading to a reduction in surface passivation and a deterioration of the metal-TCO interface. NaCl primarily affects the Ag contact, resulting in a reduction of the adhesion of the screen-printed contact. Moreover, the TCO composition, particularly the oxygen content, influences its chemical tolerance. These results show that Na-related degradation is more complicated than initially thought. The chemistry is strongly influenced by the negative ions, as well as the composition of TCO and metal paste. These factors are determined by the bill of materials and the contaminants introduced during cell/module fabrication and operation of the SHJ module. The findings of this paper may lead to the development of new accelerated testing protocols for SHJ technology to ascertain long-term reliability in the field. • Three sodium salts (NaHCO₃, NaCl, NaNO₃) were used as degradation agents to simulate contamination in SHJ cells under damp-heat. • Elemental profiling revealed unique degradation pathways driven by the specific anionic properties of each contaminant. • NaHCO₃ damages TCO layers, compromising V oc and contact; NaCl causes Ag contact failures; NaNO₃ shows negligible impact. • Results highlight ion-driven degradation, aiding material selection and diagnostics for solar module reliability.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (85)

Show source-provided references
1. Chapter 5 - agrivoltaics: solar power generation and food production
2. Silicon heterojunction solar cells: techno-economic assessment and opportunities10.1016/j.joule.2022.02.009 ↗
3. High-efficiency silicon heterojunction solar cells: a review10.1515/green-2011-0018 ↗
4. Silicon heterojunction back contact solar cells by laser patterning10.1038/s41586-024-08110-8 ↗
5. Solar cell efficiency tables (Version 64)10.1002/pip.3831 ↗
6. Long‐term performance and reliability of silicon heterojunction solar modules10.1002/pip.3688 ↗
7. Potential-induced degradation in photovoltaic modules: a critical review10.1039/C6EE02271E ↗
8. Comprehensive study of potential-induced degradation in silicon heterojunction photovoltaic cell modules10.1002/pip.3006 ↗
9. Moisture induced degradation in field-aged multicrystalline silicon photovoltaic modules10.1016/j.solmat.2023.112407 ↗
10. Moisture ingress in photovoltaic modules: a review10.1016/j.solener.2021.06.055 ↗
11. Sodium outdiffusion from stacking faults as root cause for the recovery process of potential-induced degradation (PID)10.1016/j.egypro.2014.08.013 ↗
12. Hydration of soda-lime glass10.1016/0022-3093(79)90053-X ↗
13. Ion exchange for glass strengthening10.1016/j.mseb.2007.11.029 ↗
14. Towards a glass new world: the role of ion-exchange in modern technology10.3390/app11104610 ↗
15. Optical waveguide formed by electrically induced migration of ions in glass plates10.1063/1.1654265 ↗
16. Fabrication of ion-exchanged optical waveguides from dilute silver nitrate melts10.1109/JQE.1978.1069721 ↗
17. Glass waveguides made using low melting point nitrate mixtures10.1364/AO.27.000472 ↗
18. The chlorine abundance of Earth: implications for a habitable planet10.1016/j.epsl.2013.03.005 ↗
19. The budget and cycle of Earth's natural chlorine10.1351/pac199668091689 ↗
20. Chlorine stable isotope composition of the oceanic crust: implications for Earth's distribution of chlorine10.1016/0012-821X(95)00017-7 ↗
21. Accelerated damp-heat testing at the cell-level of bifacial silicon HJT, PERC and TOPCon solar cells using sodium chloride10.1016/j.solmat.2023.112554 ↗
22. Imaging and micro-structural characterization of moisture induced degradation in crystalline silicon photovoltaic modules10.1016/j.solener.2019.11.037 ↗
23. Evaluation of damp‐heat testing of photovoltaic modules10.1002/pip.2842 ↗
24. Changes of solar cell parameters during damp‐heat exposure10.1002/pip.2793 ↗
25. Origin of damp-heat induced cell degradation10.1016/j.solmat.2013.03.022 ↗
26. Corrosion behavior of silver-coated conductive yarn10.3389/fchem.2023.1090648 ↗
27. Four failure modes in silicon heterojunction glass-backsheet modules10.1016/j.solmat.2023.112358 ↗
28. A comprehensive physical model for the sensitivity of silicon heterojunction photovoltaic modules to water ingress10.1016/j.xcrp.2023.101751 ↗
29. Analysis of the electrochemical reactions and ions migration for crystalline silicon solar module under high system voltage10.1016/j.solener.2021.07.050 ↗
30. New world-record efficiency for pure-sulfide Cu (In, Ga) S 2 thin-Film solar cell with Cd-free buffer layer via KCN-free process10.1109/JPHOTOV.2016.2537540 ↗
31. Potential‐free sodium‐induced degradation of silicon heterojunction solar cells10.1002/pip.3698 ↗
32. Highly crystallized tungsten doped indium oxide film stabilizes silicon heterojunction solar cells in sodium environment10.1016/j.solmat.2021.111387 ↗
33. Addressing sodium ion-related degradation in SHJ cells by the application of nano-scale barrier layers10.1016/j.solmat.2023.112604 ↗
34. Effects of SiOx barrier layer prepared by plasma-enhanced chemical vapor deposition on improvement of long-term reliability and production cost for Cu-plated amorphous Si/crystalline Si heterojunction solar cells10.1016/j.solmat.2016.12.029 ↗
35. Damp heat induced degradation of silicon heterojunction solar cells with Cu-plated contacts10.1109/JPHOTOV.2019.2941693 ↗
36. Corrosion effects in bifacial crystalline silicon PV modules; interactions between metallization and encapsulation10.1016/j.solmat.2023.112321 ↗
37. Accurate series resistance measurement of solar cells10.1002/pip.1216 ↗
38. An advanced software suite for the processing and analysis of silicon luminescence images10.1016/j.cpc.2017.02.012 ↗
39. Advanced luminescence based effective series resistance imaging of silicon solar cells10.1063/1.2982588 ↗
40. Morphological and structural characterization of magnetron-sputtered aluminum and aluminum-boron thin films10.3390/cryst11050492 ↗
41. Non‐uniform sputtering and degradation of depth resolution during GDOES depth profiling analysis of thin anodic alumina films grown over rough substrates10.1002/(SICI)1096-9918(199910)27:10<950::AID-SIA658>3.0.CO;2-X ↗
42. Effects of organic pollutants on the fractional crystallization of NaNO3 from high-saline wastewater10.1016/j.jcrysgro.2020.125656 ↗
43. Discrete breathers in crystals with NaCl structure10.1103/PhysRevB.81.214306 ↗
44. A study on the electrical properties of atomic layer deposition grown InO x on flexible substrates with respect to N2O plasma treatment and the associated thin-film transistor behavior under repetitive mechanical stress10.1021/acsami.6b11815 ↗
45. Characterization of Indium−Tin oxide interfaces using X-ray photoelectron spectroscopy and redox processes of a chemisorbed probe molecule: effect of surface pretreatment conditions10.1021/la011101t ↗
46. Transducer-aware hydroxy-rich-surface indium oxide gas sensor for low-power and high-sensitivity NO2 gas sensing10.1021/acsami.3c00022 ↗
47. The oxidation and surface speciation of indium and indium oxides exposed to atmospheric oxidants10.1016/j.susc.2015.10.026 ↗
48. A new investigation of oxygen flow influence on ITO thin films by magnetron sputtering10.1016/j.solmat.2013.08.036 ↗
49. Effects of oxygen flow on the properties of indium tin oxide films10.1016/j.matchemphys.2005.09.012 ↗
50. X-ray photoelectron spectroscopy of surface-treated indium-tin oxide thin films10.1016/S0009-2614(99)01233-6 ↗
51. Tailoring sodium anodes for stable sodium–oxygen batteries10.1002/adfm.201706374 ↗
52. Operando ambient pressure X-ray photoelectron spectroscopy studies of sodium–oxygen redox reactions10.1007/s11244-018-1066-3 ↗
53. Electrochemical behaviour of lithium, sodium and potassium ion electrolytes in a Na0. 33V2O5 symmetric pseudocapacitor with high performance and high cyclic stability10.1002/celc.201700923 ↗
54. Silver frameworks based on self-sintering silver micro-flakes and its application in low temperature curing conductive pastes10.1007/s10854-019-02511-6 ↗
55. Recent advances in isotropic conductive adhesives for electronics packaging applications10.1016/j.ijadhadh.2007.10.004 ↗
56. Recent advances of conductive adhesives as a lead-free alternative in electronic packaging: materials, processing, reliability and applications10.1016/j.mser.2006.01.001 ↗
57. Choice of the low-temperature sintering Ag paste for a-Si:H/c-Si heterojunction solar cell based on characterizing the electrical performance10.1016/j.jallcom.2014.08.175 ↗
58. Preparation of micron size flake silver powders for conductive thick films10.1007/s10854-006-9042-2 ↗
59. The influence of a dispersion of particles on the sintering of metal powders and wires10.1016/0079-6425(80)90013-4 ↗
60. A review of silver nanoparticles: synthesis methods, properties and applications
61. A review of silver nanoparticles: research trends, global consumption, synthesis, properties, and future challenges10.1002/jccs.201700067 ↗
62. Large-area bonding by sintering of a resin-free nanosilver paste at ultralow temperature of 180 C10.1109/TCPMT.2022.3159033 ↗
63. Effects of polyester resin molecular weight on the performance of low temperature curing silver pastes10.1007/s10854-016-4593-3 ↗
64. Low-temperature sintering of Ag composite pastes with different metal organic decomposition additions10.3390/ma16062340 ↗
65. Low-temperature sintering properties of the screen-printed silver paste for a-Si: H/c-Si heterojunction solar cells10.1007/s10854-014-1925-z ↗
66. Effects of metallo-organic decomposition agents on thermal decomposition and electrical conductivity of low-temperature-curing silver paste10.1143/JJAP.45.6987 ↗
67. Effects of organic additives on the microstructural, rheological and electrical properties of silver paste for LTCC applications10.1007/s10854-021-05999-z ↗
68. Die-attaching silver paste based on a novel solvent for high-power semiconductor devices10.1007/s10853-015-9659-8 ↗
69. Enhancing low-temperature and pressureless sintering of micron silver paste based on an ether-type solvent10.1007/s11664-017-5525-6 ↗
70. Effects of solvent type on low-temperature sintering of silver oxide paste to form electrically conductive silver film10.1007/s11664-011-1698-6 ↗
71. Epoxy resins and their zinc composites as novel anti-corrosive materials for copper in 3% sodium chloride solution: experimental and computational studies10.1016/j.molliq.2020.113757 ↗
72. Corrosion behavior of epoxy resin cured with different amount of hardener in corrosive solutions10.2472/jsms.52.9Appendix_230 ↗
73. Epoxy resins as anticorrosive polymeric materials: a review10.1016/j.reactfunctpolym.2020.104741 ↗
74. Cyclotriphosphazene based dendrimeric epoxy resin as an anti-corrosive material for copper in 3% NaCl: experimental and computational demonstrations10.1016/j.molliq.2020.113020 ↗
75. The electrochemical formation and reduction of a thick AgCl deposition layer on a silver substrate10.1016/S0022-0728(02)01474-2 ↗
76. Silver chloride as a heterogeneous nucleant for the growth of silver nanowires10.1021/nn400414h ↗
77. Aggregation kinetics of nanosilver in different water conditions10.1088/2043-6262/3/3/035006 ↗
78. Dissolution-accompanied aggregation kinetics of silver nanoparticles10.1021/la101768n ↗
79. Aggregation kinetics and dissolution of coated silver nanoparticles10.1021/la202328n ↗
80. Aggregation kinetics of citrate and polyvinylpyrrolidone coated silver nanoparticles in monovalent and divalent electrolyte solutions10.1021/es200157h ↗
81. Oxidative dissolution of silver nanoparticles by chlorine: implications to silver nanoparticle fate and toxicity10.1021/acs.est.6b00037 ↗
82. Dissolution–recrystallization mechanism for the conversion of silver nanospheres to triangular nanoplates10.1016/j.jcis.2006.12.081 ↗
83. Polyol synthesis of silver nanoparticles: use of chloride and oxygen to promote the formation of single-crystal, truncated cubes and tetrahedrons10.1021/nl048912c ↗
84. Reduction of Ag+ in aqueous polyanion solution: some properties and reactions of long‐lived oligomeric silver clusters and metallic silver particles10.1002/bbpc.199000058 ↗
85. Influence of various chloride ion concentrations on silver nanoparticle transformations and effectiveness in surface enhanced Raman scattering for different excitation wavelengths10.1039/C4RA13881C ↗