Characterization of UV–Vis–NIR optical constants of encapsulant for accurate determination of absorption and backscattering losses in photovoltaics modules
Source abstract
Abstract
The determination of the optical properties of encapsulant for photovoltaic modules is essential for cell-to-module (CTM) performance analysis, UV-durability studies and as input parameters of modelling tools. Some innovative polymer encapsulants used in heterojunction module manufacturing, such as polyolefin elastomer or thermoplastic polyolefin, show a non-negligible optical scattering behaviour in addition to refraction and absorption mechanisms, making challenging the extraction of optical properties in general, and optical indices in particular. In this work, a 4-flux optical model was applied on total and diffuse transmittance and reflectance measurements of a Thermoplastic PolyOlefin (TPO) encapsulant layer to extract values of refractive index, absorption, scattering coefficient and anisotropy coefficient of scattered light. This model was found mandatory to obtain a satisfactory fitting and plausible value of the optical parameters, in opposition to simpler models based on collimated light, or only diffuse light, or isotropic 4-flux model. The model was applied on two diffusive TPO: a low and a high UV cut-off. The absorption was found respectively to be 1.7% and 3.8%. Therefore, a new Cell-To-Module source of loss was identified, induced by the backscattered light in the encapsulant bulk, whose value is near 0.8% of the incoming light in both samples.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Organic Electronics and Photovoltaics · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. VDMA · 2019
2. Chunduri · 2018
3. Unified methodology for determining CTM ratios: systematic prediction of module power10.1016/j.solmat.2014.06.025 ↗
4. Glass and other encapsulation materials
5. Glass and coatings on glass for solar applications10.1007/978-3-319-93728-1_48 ↗
6. Glass needs for a growing photovoltaics industry10.1016/j.solmat.2014.09.028 ↗
7. Measurement of the optical constants of soda-lime glasses in dependence of iron content and modeling of iron-related power losses in crystalline Si solar cell modules10.1109/JPHOTOV.2015.2498043 ↗
8. Rodríguez · 2015 · 8
9. Y. S. Khoo, F. Lu, T. M. Walsh, and A. G. Aberle, “Effective Finger Shading Width of Screen-Printed Silicon Wafer Solar Cells in A Pv Module,” 27th European Photovoltaic Solar Energy Conference and Exhibition, p. 3.
10. Heinrich · 2017 · 18
11. The effect of damp-heat and UV aging tests on the optical properties of silicone and EVA encapsulants10.1002/pip.1025 ↗
12. Literature review of the effects of UV exposure on PV modules
13. Application of a new ray tracing framework to the analysis of extended regions in Si solar cell modules10.1016/j.egypro.2013.07.253 ↗
14. ISFH, Daidalos. [Online]. Available: https://www.daidalos-cloud.de/.
15. PVLightHouse, SunSolve. [Online]. Available: https://www.pvlighthouse.com.au/sunsolve.
16. 3D optical simulation formalism OPTOS for textured silicon solar cells10.1364/OE.23.0A1720 ↗
17. Optical transmission as a fast and non-destructive tool for determination of ethylene-co-vinyl acetate curing state in photovoltaic modules: optical transmission for determination of EVA curing state10.1002/pip.1175 ↗
18. The causes and effects of degradation of encapsulant ethylene vinyl acetate copolymer (EVA) in crystalline silicon photovoltaic modules: a review10.1016/j.rser.2017.06.039 ↗
19. Cattaneo · 2015 · 8
20. Encapsulant materials for PV modules
21. Effect of cooling press on the optical transmission through photovoltaic encapsulants10.1080/03602559.2014.958778 ↗
22. Optical properties of polymeric materials and their measurement10.1088/0022-3727/6/7/203 ↗
23. Optical properties of particle-filled polycarbonate, polystyrene, and poly(methyl methacrylate) composites10.1002/app.31331 ↗
24. Optical constants of UV transparent EVA and the impact on the PV module output power under realistic irradiation10.1016/j.egypro.2016.07.136 ↗
25. An optical comparison of silicone and EVA encapsulants for conventional silicon PV modules: a ray-tracing study
26. Improved spectral response of silicone encapsulated photovoltaic modules
27. Method for quantifying optical parasitic absorptance loss of glass and encapsulant materials of silicon wafer based photovoltaic modules10.1016/j.solmat.2012.03.008 ↗
28. Optical properties of polymer films for transparent insulation10.1002/1521-3900(200205)181:1<399::AID-MASY399>3.0.CO;2-O ↗
29. Structure–property correlations of polymeric films for transparent insulation wall applications. Part 1: solar optical properties10.1016/j.solener.2005.05.006 ↗
30. Determination of solar optical properties of transparent polymer films using UV/vis spectroscopy10.1016/j.solmat.2010.01.012 ↗
31. Ultraviolet light test and evaluation methods for encapsulants of photovoltaic modules10.1016/j.solmat.2009.09.009 ↗
32. Absorption and scattering in low-loss polymer optical waveguides10.1364/JOSAB.18.000908 ↗
33. Optical properties of polymeric materials for concentrator photovoltaic systems10.1016/j.solmat.2011.02.025 ↗
34. Four-flux models to solve the scattering transfer equation in terms of Lorenz-Mie parameters10.1364/AO.23.003353 ↗
35. Chandrasekhar · 2013
36. Ishimaru · 1978 · vol. 2
37. An article on optics of paint layers
38. Four-flux models to solve the scattering transfer equation: special cases10.1364/AO.25.001122 ↗
39. Generalized four-flux radiative transfer model10.1364/AO.37.002615 ↗
40. Average crossing parameter and forward scattering ratio values in four-‾ux model for multiple scattering media
41. Nocedal · 2006
42. The optical properties of diffusing materials10.1364/JOSA.32.000061 ↗
43. Shott · 2017
44. High refractive index polymers: fundamental research and practical applications10.1039/b909690f ↗
45. A practical optical and electrical model to estimate the power losses and quantification of different heat sources in silicon based PV modules10.1016/j.renene.2018.04.060 ↗