journal article·2021-09

Photovoltaic modules encapsulated in composite material modified with ultraviolet additives

Naiara Yurrita, Jon Aizpurua, Werther Cambarau, Gorka Imbuluzqueta, Juan María Hernández, Francisco J. Cano, Oihana Zubillaga

Publisher page

Abstract

Abstract Photovoltaic modules were manufactured by vacuum resin infusion process using glass reinforced epoxy composite as encapsulant where the cells are embedded. Incorporation of ultraviolet absorber (UVA) and hindered amine light stabilizer (HALS) additives to the epoxy resin was studied, given their potential to enhance the performance stability of the modules under ultraviolet (UV) radiation exposure. Photovoltaic and aging performance were examined through the evolution of external quantum efficiency (EQE) spectra, short-circuit current values and colour change. Decrease in the initial photovoltaic performance of the modules was observed, as evidenced in the short-circuit losses when additives are incorporated. Regarding the performance stability, increasing the content of both, UVA and HALS, leaded to improved results with lower short-circuit current loss and yellowness observed due to UV radiation. The most stable module, with cells embedded in 1% UVA and 1% HALS containing composite, showed a 2.8% short-circuit current loss after an UV exposure of 15.4 KWh/m2. UV protection enhancement was obtained in trade-off with initial photovoltaic performance, which should be considered when defining the additives and the amount to be used.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photovoltaic Systems and Sustainability · solar cell performance optimization · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Degradation of the encapsulant polymer in outdoor weathered photovoltaic modules: spatially resolved inspection of EVA ageing by fluorescence and correlation to electroluminescence10.1016/j.solmat.2012.03.022 ↗
2. A review of the environmental factors degrading the performance of silicon wafer-based photovoltaic modules: failure detection methods and essential mitigation techniques10.1016/j.rser.2019.04.024 ↗
3. Comparative investigation and analysis of delaminated and discolored encapsulant degradation in crystalline silicon photovoltaic modules10.1016/j.solener.2020.04.041 ↗
4. Changes of solar cell parameters during damp-heat exposure10.1002/pip.2793 ↗
5. The causes and effects of degradation of encapsulant ethylene vinyl acetate copolymer (EVA) in crystalline silicon photovoltaic modules: a review10.1016/j.rser.2017.06.039 ↗
6. Influence of typical stabilizers on the aging behavior of EVA foils for photovoltaic applications during artificial UV-weathering10.1016/j.polymertesting.2015.03.022 ↗
7. Photooxidation and photostabilization of EVA and cross-linked EVA10.1016/j.polymertesting.2016.01.018 ↗
8. A.H.M.E Reinders, H. de Wit, A. de Boer, Design of fibre reinforced PV concepts for building integrated applications, 24th European Photovoltaic Solar Energy Conference, 21-25 September 2009, Hamburg, Germany.
9. Composite material with enhanced ultraviolet performance stability for photovoltaic modules10.1016/j.solmat.2019.109947 ↗
10. O. Zubillaga et al., Glass-free PV module encapsulation with aluminium and transparent fibre reinforced organic matrix composite material, 27th European Photovoltaic Solar Energy Conference, 24-28 September 2012, Frankfurt, Germany.
11. Lamination process and encapsulation materials for glass-glass PV module design
12. Polyolefin as PID-resistant encapsulant material in PV modules10.1016/j.solmat.2015.10.009 ↗
13. Potential and applications of green composites in industrial space
14. Structural composites for multifunctional applications: current challenges and future trends10.1016/j.pmatsci.2017.04.005 ↗
15. PVCOM project: manufacture of PV modules encapsulated in composite materials for integration in urban environments
16. Households with fibre reinforced composite BIPV modules in southern europe under net metering scheme10.1016/j.renene.2017.09.068 ↗
17. Preparation of high-performance transparent glass-fiber reinforced composites based on refractive index-tunable epoxy-functionalized siloxane hybrid matrix10.1016/j.compscitech.2020.108527 ↗
18. Transparent fiber glass reinforced composites10.1016/j.compscitech.2012.12.010 ↗
19. The influence of the laminate thickness, stacking sequence and thermal aging on the static and dynamic behavior of carbon/epoxy composites10.1016/j.compstruct.2014.07.047 ↗
20. Effects of accelerated aging on mechanical, thermal and morphological behavior of polyurethane/epoxy/fiberglass composites10.1016/j.polymertesting.2016.01.010 ↗
21. Accelerated aging effects on carbon fiber/epoxy composites10.1016/j.compositesb.2016.11.004 ↗
22. Effect of methytrimethoxy silane modification on yellowing of epoxy coating on UV(B) exposure10.1155/2014/515470 ↗
23. Versatile protection of exterior coatings by the aid of graphene oxide nano-sheets; comparison with conventional UV absorbers10.1016/j.porgcoat.2017.11.020 ↗
24. Scratch and wear resistance of transparent topcoats on carbon laminates10.1016/j.porgcoat.2009.10.015 ↗
25. Visual appearance durability as function of natural and accelerated ageing of electrophorect styrene-acrylic coatings: influence of yellow pigment concentration10.1016/j.porgcoat.2016.11.028 ↗
26. A. Beinert et al., The influence of the additive composition on degradation induced changes in poly(ethylene-co-vinyl acetate) during photochemical aging, 29th European Photovoltaic Solar Energy Conference, 22-26 September 2014, Amsterdam, The Netherlands.
27. Aging behavior and degradation of different backsheets used in the field under various climates in China10.1016/j.solmat.2021.111023 ↗
28. Combined and sequential accelerated stress testing for derisking photovoltaic modules
29. Part1: test requirements; Part1-1: special requirements for testing of crystalline silicon photovoltaic (PV) modules
30. X. Jiang et al., Study on UV induced EVA discoloration for crystalline silicon solar modules, IEEE 7th World Conference on Photovoltaic Energy Conversion (WCPEC), 10-15 June 2018, Waikoloa Village, HI, USA.10.1109/PVSC.2018.8547677 ↗