An expedient semi-empirical modelling approach for optimal bandgap profiling of stoichiometric absorbers: A case study of thin film amorphous silicon germanium for use in multijunction photovoltaic devices
Source abstract
Abstract
Bandgap energy profiling is applied in a variety of materials for photovoltaic technologies, such as chalcogenides, III–V materials and perovskites. Bandgap profiling of the absorber layer is used to fight the fundamental loss mechanisms imposed by the bandgap energy of the absorber for the maximum voltage and current that a photovoltaic device can generate. The bandgap profile can be affected by a number of profiling strategies, such as the difference between the maximum and minimum bandgap energy, the position of the minimum bandgap energy, the width over which this minimum bandgap energy occurs and the total absorber width. These parameters have a complex effect on output characteristics of a photovoltaic device. Varying multiple parameters at once further increases the complexity, limiting the effectiveness of rigorous physical opto-electrical modelling. In this work we therefore present an expedient semi-empirical approach for the optimal bandgap profiling of stoichiometric absorbers. Using PECVD processed amorphous silicon germanium as a model, we present a unique set of semi-empirical relations that simulate the VOC and JSC of solar cells as a function of the bandgap energy profile. For this model, the influence of deposition conditions such as the relative germane flow rate, the deposition power and substrate temperature on the opto-electrical properties of a-SiGe:H films is first characterized. Opting for the relative germane flow rate to control the bandgap profiling, the experimental results of a large number of solar cells with profiled a-SiGe:H absorber are presented, varying: 1. the absorber thickness, 2. the peak germane flow rate, so minimum bandgap energy, and 3. the introduction of a plateau at the minimum bandgap energy. Using this experimental data and optical simulations, the expedience and effectiveness of the semi-empirical approach is demonstrated.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Semiconductor Quantum Structures and Devices · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Optimization bandgap gradation structure simulation of Cu2Sn1−XGeXS3 solar cells by SCAPS
2. Simulation of optimum band-gap grading profile of Cu2ZnSn(S, Se)4 solar cells with different optical and defect properties
3. Efficiency enhancement of ultrathin CIGS solar cells by optimal bandgap grading10.1364/AO.58.006067 ↗
4. Theoretical modeling and simulation-based assessment of graded-bandgap AlGaAs/GaAs electron-injection cathode10.1016/j.ultramic.2020.113121 ↗
5. Bandgap grading and Al0.3Ga0.7As heterojunction emitter for highly efficient GaAs-based solar cells10.1016/j.solmat.2016.06.009 ↗
6. Graded bandgap perovskite solar cells10.1038/nmat4795 ↗
7. Achieving a high open-circuit voltage in inverted wide-bandgap perovskite solar cells with a graded perovskite homojunction10.1016/j.nanoen.2019.04.069 ↗
8. Modeling and simulation of band-gap profiling with planar heterojunction of hole-transporting layer-free perovskite solar cells10.1088/2053-1591/aa77ee ↗
9. Remarkable progress in thin-film silicon solar cells using high-efficiency triple-junction technology10.1016/j.solmat.2013.04.016 ↗
10. Improvement of the efficiency of triple junction n–i–p solar cells with hot-wire CVD proto- and microcrystalline silicon absorber layers10.1016/j.tsf.2007.06.110 ↗
11. Amorphous silicon and silicon germanium materials for high-efficiency triple-junction solar cells10.1016/S0927-0248(99)00139-7 ↗
12. Amorphous silicon–germanium for triple and quadruple junction thin-film silicon based solar cells10.1016/j.solmat.2014.11.006 ↗
13. Quadruple-junction thin-film silicon solar cells using four different absorber materials
14. Thin-film silicon-based quadruple junction solar cells approaching 20% conversion efficiency10.1016/j.solmat.2014.03.021 ↗
15. Modulated surface textures for enhanced light trapping in thin-film silicon solar cells10.1063/1.3488023 ↗
16. Micro-textures for efficient light trapping and improved electrical performance in thin-film nanocrystalline silicon solar cells10.1063/1.4826639 ↗
17. Microcrystalline silicon–germanium alloys for solar cell application: Growth and material properties10.1016/j.jnoncrysol.2005.11.144 ↗
18. Photomodulation spectroscopy of defects in hydrogenated amorphous silicon germanium alloys10.1016/0022-3093(89)90658-3 ↗
19. Optimization of hydrogenated amorphous silicon germanium thin films and solar cells deposited by hot wire chemical vapor deposition10.1016/j.tsf.2015.05.055 ↗
20. Electronic mobility gap structure and the nature of deep defects in amorphous silicon-germanium alloys grown by photo-CVD10.1016/0022-3093(93)90483-E ↗
21. In-situ monitoring and control of hydrogenated amorphous silicon–germanium band-gap profiling during plasma deposition process10.1016/j.cap.2013.05.005 ↗
22. Silicon germanium active layer with graded band gap and μc-Si:H buffer layer for high efficiency thin film solar cells10.1016/j.mssp.2016.08.011 ↗
23. Electrical and optical properties of ion-beam sputtered amorphous silicon-germanium alloy films10.1016/0040-6090(91)90512-V ↗
24. Structural, optical and electrical properties of hydrogenated amorphous silicon germanium (a-Si1−xGex:H) deposited by DC magnetron sputtering at high rate10.1016/j.mssp.2006.08.016 ↗
25. Structural, electrical, and optical properties of a-Si1−xGex:H and an inferred electronic band structure10.1103/PhysRevB.31.2198 ↗
26. Structural, optical, and electrical properties of hydrogenated amorphous silicon germanium alloys10.1063/1.367229 ↗
27. Electronic structure and light induced degradation of amorphous silicon-germanium alloys10.1016/0022-3093(95)00766-0 ↗
28. Techniques for measuring the composition of hydrogenated amorphous silicon germanium alloys10.1016/S0022-3093(99)00848-0 ↗
29. Correlation of structural inhomogeneities with transport properties in amorphous silicon germanium alloy thin films10.1016/j.solmat.2010.02.043 ↗
30. Preferential attachment of H in amorphous hydrogenated binary semiconductors and consequent inferior reduction of pseudogap state density10.1103/PhysRevLett.46.1016 ↗
31. The impact of processing conditions and post-deposition oxidation on the opto-electrical properties of hydrogenated amorphous and nano-crystalline Germanium films
32. Hydrogenated amorphous silicon germanium alloy with enhanced photosensitivity prepared by plasma enhanced chemical vapor deposition at high temperature10.1016/j.vacuum.2012.09.004 ↗
33. High-quality hydrogenated amorphous silicon-germanium alloys for narrow bandgap thin film solar cells10.1016/S0022-3093(96)00513-3 ↗
34. Structural, optical and photoelectronic properties of improved PECVD a-Ge:H10.1016/S0022-3093(05)80242-X ↗
35. van Swaaij · 2000 · 869
36. Improvement in the spectral response at long wavelength of a-SiGe: H solar cells by exponential band gap design of the i-layer10.1016/S0022-3093(01)01080-8 ↗
37. a-SiGe:H based solar cells with graded absorption layer10.1063/1.368088 ↗
38. Optimization of a-SiGe:H solar cells with graded intrinsic layers using integrated optical and electrical modeling10.1016/j.tsf.2003.11.029 ↗
39. GenPro4 optical model for solar cell simulation and its application to multijunction solar cells10.1109/JPHOTOV.2017.2669640 ↗
40. Smets · 2016