journal article·2025-06Open access

Unlocking the potential of carrier-selective contacts: Key insights for designing c-Si solar cells with efficiency beyond 28 %

Paul Procel-Moya, Yifeng Zhao, Olindo Isabella

Abstract

Crystalline silicon (c-Si) solar cells are rapidly establishing new efficiency frontiers, with front/back-contacted (FBC) designs now exceeding 26.8 % power conversion efficiency (PCE) and interdigitated back-contacted (IBC) cells surger limitepassing 27 %. This progress is driving a shift from traditional FBC PERC architectures to high-performance TOPCon, SHJ, and IBC configurations, with carrier-selective contacts (CSCs) at the core of these breakthroughs. In this work, we identify three critical factors underpinning CSC effectiveness: the work function of contact layers, energy barriers at heterointerfaces, and energy alignment across the stack of layers forming the CSC. By using advanced numerical simulations, we establish a framework for evaluating and optimizing CSC designs, including state-of-the-art poly-Si, SHJ, and dopant-free structures. We also introduce novel architectures based on TCO materials with potentially simpler manufacturing processes. Our simulations reveal that advanced FBC structures, can reach PCEs up to 28 % deploying localized CSCs architecture. In optimized IBC configurations, efficiencies as high as 28.64 % are achievable. For both, FBC and IBC configurations patterning limitations remain a barrier to theoretical efficiency peaks. Future advances in precision patterning could further close this gap, pushing c-Si solar cells closer to their intrinsic limits. This study provides a roadmap for high-efficiency CSC integration in next-generation c-Si solar cells, establishing pathways to achieve performance over 28 % and accelerating the evolution of photovoltaic technology. • Key aspects of Carrier-Selective Contacts: work function, energy barriers, and energy alignment across the stack of layers. • Advanced CSC Designs: Evaluation of various CSC types for c-Si solar cells and the introduction of novel CSC structures. • High-Efficiency FBC and IBC Designs: Simulated efficiencies up to 28% in FBC and above 28% in IBC solar cells. • Technological barriers to achieving theoretical efficiency limits include the challenge of precise small-scale patterning.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Silicon heterojunction solar cells with up to 26.81% efficiency achieved by electrically optimized nanocrystalline-silicon hole contact layers
2. Solar
3. Silicon heterojunction back contact solar cells by laser patterning10.1038/s41586-024-08110-8 ↗
4. 27.09%-efficiency silicon heterojunction back contact solar cell and going beyond10.1038/s41467-024-53275-5 ↗
5. Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses10.1038/s41560-021-00805-w ↗
6. Chunduri
7. Reassessment of the limiting efficiency for crystalline silicon solar cells10.1109/JPHOTOV.2013.2270351 ↗
8. Reassessment of the intrinsic bulk recombination in crystalline silicon
9. LONGi, “34.6%! Record-breaker LONGi Once Again Sets a New World Efficiency for Silicon-perovskite Tandem Solar Cells,” LONGi press release. Accessed: October. 23, 2024. [Online]. Available: https://www.longi.com/en/news/2024-snec-silicon-perovskite-tandem-solar-cells-new-world-efficiency/.
10. Passivating contacts for crystalline silicon solar cells10.1038/s41560-019-0463-6 ↗
11. Passivating contacts for crystalline silicon solar cells: from concepts and materials to prospects10.1109/JPHOTOV.2018.2797106 ↗
12. Sze · 2006
13. The role of heterointerfaces and subgap energy states on transport mechanisms in silicon heterojunction solar cells10.1002/pip.3300 ↗
14. Theoretical evaluation of contact stack for high efficiency IBC-SHJ solar cells10.1016/j.solmat.2018.06.021 ↗
15. Comparison of raised and Schottky source/drain MOSFETs using a novel tunneling contact model10.1109/IEDM.1998.746461 ↗
16. Modeling of tunneling current and gate dielectric reliability for nonvolatile memory devices10.1109/TDMR.2004.836727 ↗
17. Charge carrier separation in solar cells10.1109/JPHOTOV.2014.2363550 ↗
18. Physics of solar cells: from basic principles to advanced concepts
19. Numerical simulations of hole carrier selective contacts in p-type c-Si solar cells
20. Smets · 2015
21. Theoretical evaluation of contact stack for high efficiency IBC-SHJ solar cells10.1016/j.solmat.2018.06.021 ↗
22. Shao · 2021
23. Transparent conducting oxides for photovoltaics: manipulation of fermi level,work function and energy band alignment10.3390/ma3114892 ↗
24. Achieving 23.83% conversion efficiency in silicon heterojunction solar cell with ultra-thin MoOx hole collector layer via tailoring (i)a-Si:H/MoOx interface
25. Thin-film metal oxides in organic semiconductor devices: their electronic structures, work functions and interfaces10.1038/am.2013.29 ↗
26. Transition metal oxide work functions: the influence of cation oxidation state and oxygen vacancies10.1002/adfm.201200615 ↗
27. Modeling and simulation of tunneling through ultra-thin gate dielectrics10.1063/1.365364 ↗
28. Numerical simulation of carrier-selective electron contacts featuring tunnel oxides10.1109/JPHOTOV.2015.2455346 ↗
29. The role of heterointerfaces and subgap energy states on transport mechanisms in silicon heterojunction solar cells10.1002/pip.3300 ↗
30. The application of poly-Si/SiOx contacts as passivated top/rear contacts in Si solar cells10.1016/j.solmat.2016.09.015 ↗
31. SiO2 surface passivation layers – a key technology for silicon solar cells10.1016/j.solmat.2018.04.029 ↗
32. 26.1%-efficient POLO-IBC cells: quantification of electrical and optical loss mechanisms10.1002/pip.3098 ↗
33. Separating the two polarities of the POLO contacts of an 26.1%-efficient IBC solar cell10.1038/s41598-019-57310-0 ↗
34. For none, one, or two polarities—how do POLO junctions fit best into industrial Si solar cells?
35. Working principle of carrier selective poly-Si/c-Si junctions: is tunnelling the whole story?10.1016/j.solmat.2016.05.045 ↗
36. Dielectric surface passivation for silicon solar cells: a review
37. Passivation properties of tunnel oxide layer in passivated contact silicon solar cells10.1016/j.apsusc.2017.02.195 ↗
38. Design and application of ion-implanted polySi passivating contacts for interdigitated back contact c-Si solar cells10.1063/1.4940364 ↗
39. Poly-crystalline silicon-oxide films as carrier-selective passivating contacts for c-Si solar cells10.1063/1.5027547 ↗
40. Effect of crystallographic orientation and nanoscale surface morphology on poly-Si/SiOx contacts for silicon solar cells10.1021/acsami.9b11889 ↗
41. The application of poly-Si/SiOxcontacts as passivated top/rear contacts in Si solar cells10.1016/j.solmat.2016.09.015 ↗
42. Studying dopant diffusion from Poly-Si passivating contacts
43. Pinhole density and contact resistivity of carrier selective junctions with polycrystalline silicon on oxide10.1063/1.4986924 ↗
44. Will SiOx-pinholes for SiOx/poly-Si passivating contact enhance the passivation quality?
45. Charge carrier transport mechanisms of passivating contacts studied by temperature-dependent J-V measurements10.1016/j.solmat.2018.01.008 ↗
46. Charge-carrier dynamics for silicon oxide tunneling junctions mediated by local pinholes
47. Passivating polysilicon recombination junctions for crystalline silicon solar cells10.1002/pssr.202100272 ↗
48. From PERC to tandem: POLO-and p+/n+ poly-Si tunneling junction as interface between bottom and top cell10.1109/JPHOTOV.2018.2876999 ↗
49. Passivating and low-resistive poly-Si tunneling junction enabling high-efficiency monolithic perovskite/silicon tandem solar cells10.1063/1.5120552 ↗
50. Transparent passivated contacts for Si solar cells
51. Oxygen-alloyed poly-Si passivating contacts for high-thermal budget c-Si heterojunction solar cells10.1002/pip.3472 ↗
52. Poly-SiOx passivating contacts with plasma-assisted N2O oxidation of silicon (PANO-SiOx)10.1002/solr.202300186 ↗
53. Silicon-rich silicon carbide hole-selective rear contacts for crystalline-silicon-based solar cells10.1021/acsami.6b12714 ↗
54. A passivating contact for silicon solar cells formed during a single firing thermal annealing10.1038/s41560-018-0239-4 ↗
55. Crystalline silicon solar cells with coannealed electron- and hole-selective SiC x passivating contacts
56. “A silicon carbide-based highly transparent passivating contact for crystalline silicon solar cells approaching efficiencies of 24%,”
57. Transparent silicon carbide/tunnel SiO 2 passivation for c‐Si solar cell front side: enabling J sc 42 mA/cm 2 and i V oc of 742 mV10.1002/pip.3244 ↗
58. Optical characterization of poly-SiOx and poly-SiCx carrier-selective passivating contacts10.1016/j.solmat.2020.110507 ↗
59. Implantation‐based passivating contacts for crystalline silicon front/rear contacted solar cells
60. Application of polycrystalline silicon carbide thin films as the passivating contacts for silicon solar cells
61. Crystalline silicon solar cells with thin poly-SiOx carrier-selective passivating contacts for perovskite/c-Si tandem applications10.1002/pip.3693 ↗
62. Mechanisms of charge carrier transport in polycrystalline silicon passivating contacts10.1016/j.solmat.2021.111359 ↗
63. Numerical simulations of IBC solar cells based on poly-Si carrier-selective passivating contacts10.1109/JPHOTOV.2019.2892527 ↗
64. Analysis of silicon solar cells with poly-Si/SiOx carrier-selective base and emitter contacts10.1109/JPHOTOV.2017.2775142 ↗
65. Pinholes may mimic tunneling10.1063/1.1344220 ↗
66. Silicon solar cell architecture with front selective and rear full area ion-implanted passivating contacts10.1002/solr.201700040 ↗
67. Numerical simulation of carrier-selective electron contacts featuring tunnel oxides10.1109/JPHOTOV.2015.2455346 ↗
68. Understanding the charge transport mechanisms through ultrathin SiO x layers in passivated contacts for high-efficiency silicon solar cells10.1063/1.5081832 ↗
69. High-efficiency silicon heterojunction solar cells: a review10.1515/green-2011-0018 ↗
70. High-efficiency crystalline silicon solar cells: status and perspectives10.1039/C5EE03380B ↗
71. Strategies for realizing high-efficiency silicon heterojunction solar cells
72. High-efficiency silicon heterojunction solar cells: materials, devices and applications
73. Strategies for doped nanocrystalline silicon integration in silicon heterojunction solar cells10.1109/JPHOTOV.2016.2571619 ↗
74. Nanocrystalline silicon carrier collectors for silicon heterojunction solar cells and impact on low-temperature device characteristics10.1109/JPHOTOV.2016.2604574 ↗
75. 25.11% efficiency silicon heterojunction solar cell with low deposition rate intrinsic amorphous silicon buffer layers
76. Effects of (i)a-Si:H deposition temperature on high-efficiency silicon heterojunction solar cells
77. Ultra-thin nanocrystalline n-type silicon oxide front contact layers for rear-emitter silicon heterojunction solar cells10.1016/j.solmat.2018.01.034 ↗
78. Nanocrystalline silicon emitter optimization for Si-HJ solar cells: substrate selectivity and CO sub2/sub plasma treatment effect
79. Silicon heterojunction solar cells with nanocrystalline silicon oxide emitter: insights into charge carrier transport10.1109/JPHOTOV.2015.2479461 ↗
80. Versatility of doped nanocrystalline silicon oxide for applications in silicon thin-film and heterojunction solar cells10.1016/j.solmat.2017.08.035 ↗
81. Silicon heterojunction solar cell with amorphous silicon oxide buffer and microcrystalline silicon oxide contact layers10.1002/pssr.201206030 ↗
82. Amorphous silicon oxide window layers for high-efficiency silicon heterojunction solar cells10.1063/1.4861404 ↗
83. Silicon heterojunction solar cells with high surface passivation quality realized using amorphous silicon oxide films with epitaxial phase10.7567/JJAP.54.052303 ↗
84. Doped hydrogenated nanocrystalline silicon oxide layers for high‐efficiency c‐Si heterojunction solar cells10.1002/pip.3256 ↗
85. Design and optimization of hole collectors based on nc-SiO :H for high-efficiency silicon heterojunction solar cells10.1016/j.solmat.2020.110779 ↗
86. Qiu · 2024
87. Origin of the Vocenhancement with a p-doped nc-SiOx:H window layer in n-i-p solar cells10.1016/j.jnoncrysol.2012.01.058 ↗
88. Amorphous silicon carbide/crystalline silicon heterojunction solar cells: a comprehensive study of the photocarrier collection10.1143/JJAP.37.3926 ↗
89. Amorphous silicon carbide passivating layers for crystalline-silicon-based heterojunction solar cells10.1063/1.4928203 ↗
90. Role of oxygen and nitrogen in n-type microcrystalline silicon carbide grown by hot wire chemical vapor deposition10.1063/1.4971402 ↗
91. Passivating electron contact based on highly crystalline nanostructured silicon oxide layers for silicon solar cells10.1016/j.solmat.2016.06.040 ↗
92. Silicon heterojunction solar cell passivation in combination with nanocrystalline silicon oxide emitters10.1002/pssa.201532945 ↗
93. Front contact optimization for rear-junction SHJ solar cells with ultra-thin n-type nanocrystalline silicon oxide10.1016/j.solmat.2020.110471 ↗
94. Wide-bandgap p-type microcrystalline silicon oxycarbide using additional trimethylboron for silicon heterojunction solar cells10.1002/pip.2875 ↗
95. Transparent silicon carbide/tunnel SiO 2 passivation for c‐Si solar cell front side: enabling J sc 42 mA/cm 2 and i V oc of 742 mV10.1002/pip.3244 ↗
96. Electronic transport in doped mixed-phase hydrogenated amorphous/nanocrystalline silicon thin films10.1063/1.3685491 ↗
97. Electronic and structural properties of doped amorphous and nanocrystalline silicon deposited at low substrate temperatures by radio-frequency plasma-enhanced chemical vapor deposition10.1116/1.1586275 ↗
98. A simulation study of temperature effects on performance parameters of silicon heterojunction solar cells with different ITO/a-Si:H selective contacts
99. TCO work function related transport losses at the a-Si:H/TCO-contact in SHJ solar cells10.1016/j.solmat.2014.06.026 ↗
100. Infrared light management in high-efficiency silicon heterojunction and rear-passivated solar cells10.1063/1.4772975 ↗