Optimization of the perovskite cell in a bifacial two-terminal perovskite/silicon tandem module
Source abstract
Abstract
Bifacial perovskite/silicon solar cells can combine the advantages of tandem technology (high efficiencies) and bifacial modules (additional received irradiance from the rear) to increase the energy yield of photovoltaic (PV) systems further. In literature, it has already been shown that for two-terminal tandems this would require a lower bandgap energy ( E g ) for the perovskite cell, as the rear irradiance increases the current in the bottom cell creating a current mismatch, if this is not considered during optimization. This work expands on bifacial two-terminal tandem optimization by considering aspects not included before. Besides the E g , the thickness ( d ) of the perovskite is also optimized, as this also affects the current matching. Additionally, this work studies the trends in different energy losses of the PV module to better understand what affects the optimal perovskite cell. Our simulations show that the optimal E g is 1.61–1.65 eV and the optimal d is 650–750 nm, which agrees with the observations in literature. The optimal E g and d are mostly a trade-off between mismatch and thermalization losses, meaning that the mismatch losses should not be fully minimized. Additionally, the irradiance from the rear side is converted less efficiently than the front side irradiance due to larger thermalization and reflection losses. Therefore, the energy yield of bifacial tandem modules, compared to monofacial tandem ones, only increases for large ground albedo . Finally, our results show that the bifacial tandems have over a 25% gain in energy yield compared to bifacial single junction modules and up to 5% gain compared to monofacial tandem modules.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Perovskite Materials and Applications · Transition Metal Oxide Nanomaterials · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. VDMA · 2024
2. 2024
3. Reassessment of the limiting efficiency for crystalline silicon solar cells10.1109/JPHOTOV.2013.2270351 ↗
4. Accurate calculation of the absorptance enhances efficiency limit of crystalline silicon solar cells with lambertian light trapping10.1109/JPHOTOV.2018.2824024 ↗
5. Detailed balance limit of the efficiency of tandem solar cells10.1088/0022-3727/13/5/018 ↗
6. Review on efficiency improvement effort of perovskite solar cell10.1016/j.solener.2022.01.060 ↗
7. Efficient perovskite solar cells via improved carrier management10.1038/s41586-021-03285-w ↗
8. Optical modeling of wide-bandgap perovskite and perovskite/silicon tandem solar cells using complex refractive indices for arbitrary-bandgap perovskite absorbers10.1364/OE.26.027441 ↗
9. Solar cell efficiency tables (version 62)10.1002/pip.3726 ↗
10. Interface engineering for high-performance, triple-halide perovskite–silicon tandem solar cells10.1126/science.adf5872 ↗
11. 2023
12. Bifacial solar photovoltaics – a technology review10.1016/j.rser.2016.03.041 ↗
13. Novel applications of bifacial solar cells10.1002/pip.510 ↗
14. Predicted power output of silicon-based bifacial tandem photovoltaic systems10.1016/j.joule.2019.12.017 ↗
15. Current-matching erases the anticipated performance gain of next-generation two-terminal Perovskite-Si tandem solar farms10.1016/j.apenergy.2022.120175 ↗
16. Energy yield prediction of bifacial perovskite/silicon tandem photovoltaic modules10.1002/solr.202300218 ↗
17. Bandgap optimization for bifacial tandem solar cells10.1021/acsenergylett.3c01014 ↗
18. Efficient bifacial monolithic perovskite/silicon tandem solar cells via bandgap engineering10.1038/s41560-020-00756-8 ↗
19. Perovskite/silicon tandem solar cells: Effect of luminescent coupling and bifaciality10.1002/solr.202000628 ↗
20. Energy yield of bifacial textured perovskite/silicon tandem photovoltaic modules10.1016/j.solmat.2019.110367 ↗
21. Comparing optical performance of a wide range of perovskite/silicon tandem architectures under real-world conditions10.1515/nanoph-2020-0643 ↗
22. Planet-scale energy yield potential of next-generation bifacial, multiterminal, perovskite-silicon tandem solar farms
23. Energy yield modeling of bifacial all-perovskite two-terminal tandem photovoltaics
24. Energy loss analysis of two-terminal tandem PV systems under realistic operating conditions—Revealing the importance of fill factor gains10.1002/solr.202370083 ↗
25. Effect of absorber layer, hole transport layer thicknesses, and its doping density on the performance of perovskite solar cells by device simulation10.1016/j.solener.2019.12.014 ↗
26. Efficiencies of perovskite hybrid solar cells influenced by film thickness and morphology of CH3NH3PbI3-xClx layer10.1016/j.orgel.2015.02.023 ↗
27. The ASTER spectral library version 2.010.1016/j.rse.2008.11.007 ↗
28. Understanding and benchmarking ground reflectors for bifacial photovoltaic yield enhancement
29. Introducing a comprehensive physics-based modelling framework for tandem and other PV systems10.1016/j.solmat.2022.111944 ↗
30. GenPro4 optical model for solar cell simulation and its application to multijunction solar cells10.1109/JPHOTOV.2017.2669640 ↗
31. Net radiation method for transmission through partially transparent plates10.1016/0038-092X(73)90090-X ↗
32. Zeman · 2019
33. Modelling of thin-film silicon solar cells10.1016/j.solmat.2013.05.037 ↗
34. Accurate opto-electrical modeling of multi-crystalline silicon wafer-based solar cells10.1016/j.solmat.2013.12.019 ↗
35. Calculation of irradiance distribution on PV modules by combining sky and sensitivity maps10.1016/j.solener.2017.04.036 ↗
36. Time-varying, ray tracing irradiance simulation approach for photovoltaic systems in complex scenarios with decoupled geometry, optical properties and illumination conditions10.1002/pip.3614 ↗
37. All-weather model for sky luminance distribution—Preliminary configuration and validation10.1016/0038-092X(93)90017-I ↗
38. Parameterized transmittance model for direct beam and circumsolar spectral irradiance10.1016/S0038-092X(01)00054-8 ↗
39. SBDART: A research and teaching software tool for plane-parallel radiative transfer in the earth’s atmosphere10.1175/1520-0477(1998)079<2101:SARATS>2.0.CO;2 ↗
40. Exploring the potential of perovskite/perovskite/ silicon triple junction PV modules in two- and four-terminal configuration
41. A mathematical model for cell-to-module conversion considering mismatching solar cells and the resistance of the interconnection ribbon10.1016/j.solener.2014.01.032 ↗
42. Method for bandgap interpolation of perovskite’s spectral complex refractive index10.1364/OE.509982 ↗
43. YBlom1999 · 2024
44. Design and numerical investigation of perovskite/silicon tandem solar cell10.1016/j.optmat.2022.112671 ↗
45. World map of the Köppen-Geiger climate classification updated10.1127/0941-2948/2006/0130 ↗
46. Methodology of Köppen-Geiger-Photovoltaic climate classification and implications to worldwide mapping of PV system performance10.1016/j.solener.2019.08.072 ↗
47. Surface albedo and reflectance: Review of definitions, angular and spectral effects, and intercomparison of major data sources in support of advanced solar irradiance modeling over the Americas10.1016/j.solener.2019.02.040 ↗
48. Efficiency limit of perovskite/si tandem solar cells10.1021/acsenergylett.6b00405 ↗
49. Structuring of perovskite-silicon tandem solar cells for reduced reflectance and thermalization losses10.1364/OE.491371 ↗
50. Standardizing perovskite solar modules beyond cells10.1016/j.joule.2019.08.015 ↗