Optimizing bypass diode performance with modified hotspot mitigation circuit
Source abstract
Abstract
The frequently changing environmental conditions have a substantial impact on the performance of photovoltaic (PV) systems, which makes it challenging to ensure its high-performance ratios. Mismatch of solar cells is one such factor, that leads to formation of hotspot in solar PV systems and reduces its reliability. The experimental findings presented in this article shows the inadequacy of conventional bypass circuit to protect the shaded PV module from adverse thermal impacts of small shaded areas at all operating points and for large shaded areas at maximum power point. Its performance is assessed through I-V, P-V, and bypass characteristic of the PV system for various partial shading scenarios. Previous attempts to mitigate hotspots were considered complex and costly for practical use. This article suggests a cost-effective remedy by simplifying the triggering of MOSFET based hotspot mitigation circuit. The performance of the proposed circuit is demonstrated using a 3x3 TCT connected PV array and its efficacy is confirmed via thermographic images, validating the enhanced reliability aspect. The findings reveal that the implemented solution effectively reduces the temperature of the shadowed cell(s) by up to 27.45 % when compared with conventional bypass circuit.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon Carbide Semiconductor Technologies · Photovoltaic System Optimization Techniques · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. 2024
2. Evaluation of the impact of solar spectrum and temperature variations on output power of silicon based photovoltaic modules10.1016/j.solmat.2006.06.045 ↗
3. Bypass diode and photovoltaic module failure analysis of 1.5kW solar PV array, Energy Sources, Part A Recovery
4. A novel population based maximum point tracking algorithm to overcome partial shading issues in solar photovoltaic technology10.1016/j.enconman.2021.114470 ↗
5. Effect of dust, humidity, and air velocity on efficiency of photovoltaic cells10.1016/j.rser.2012.02.012 ↗
6. Investigation of wind speed cooling effect on PV panels in windy locations10.1016/j.renene.2016.01.017 ↗
7. State of the art artificial intelligence-based MPPT techniques for mitigating partial shading effects on PV systems-A review10.1016/j.rser.2016.06.053 ↗
8. An analytical approach to study partial shading effects on PV array supported by literature10.1016/j.rser.2017.02.078 ↗
9. Enhancing the tracking techniques for the global maximum power point under partial shading conditions10.1016/j.rser.2017.02.029 ↗
10. A comparison of different global MPPT techniques based on meta-heuristic algorithms for photovoltaic system subjected to partial shading conditions10.1016/j.rser.2017.02.051 ↗
11. Efficient output power enhancement and protection technique for hot spotted solar photovoltaic modules10.1109/TDMR.2019.2945194 ↗
12. A survey on mismatching and aging of PV modules: the closed loop10.1109/TIE.2015.2418731 ↗
13. Detection and analysis of hot-spot formation in solar cells10.1016/j.solmat.2009.09.016 ↗
14. Optimal photovoltaic array reconfiguration to reduce partial shading losses10.1109/TSTE.2012.2208128 ↗
15. Analysis and comparison of different PV array configurations under partial shading conditions10.1016/j.solener.2017.12.004 ↗
16. Switched-capacitor converter for PV modules under partial shading and mismatch conditions
17. Mathematical analysis of total-cross-tied photovoltaic array under partial shading condition and its comparison with other configurations10.1016/j.solener.2016.03.058 ↗
18. Evaluation of mathematical model to characterize the performance of conventional and hybrid PV array topologies under static and dynamic shading patterns10.3390/en13123216 ↗
19. A novel fixed PV array configuration for harvesting maximum power from shaded modules by reducing the number of cross-ties10.1109/JESTPE.2020.2979632 ↗
20. Ancient Chinese magic square-based PV array reconfiguration methodology to reduce power loss under partial shading conditions
21. Maximizing the power generation of a partially shaded PV array10.1109/JESTPE.2015.2498282 ↗
22. Dominance square-based array reconfiguration scheme for power loss reduction in solar photovoltaic (PV) systems10.1016/j.enconman.2017.10.080 ↗
23. Performance improvement by mitigating the effects of moving cloud conditions10.1109/TPEL.2020.3020807 ↗
24. A new shade dispersion technique compatible for symmetrical and unsymmetrical photovoltaic (PV) arrays10.1016/j.energy.2021.120241 ↗
25. A novel Global maximum power extraction technique for partial shaded solar PV system
26. Low-power cool bypass switch for hot spot prevention in photovoltaic panels10.4218/etrij.11.0110.0744 ↗
27. Higher PV module efficiency by a novel CBS bypass10.1109/TPEL.2010.2095469 ↗
28. A novel low power active bypass approach for photovoltaic panels
29. A novel hot spot mitigation circuit for improved reliability of PV module10.1109/TDMR.2020.2970163 ↗
30. A modified bypass circuit for improved hot spot reliability of solar panels subject to partial shading10.1016/j.solener.2016.05.001 ↗
31. Toward a hot spot free PV module10.1109/JPHOTOV.2019.2894912 ↗
32. A modified bypass circuit for improved reliability of PV module validated with real-time data10.1109/TDMR.2023.3247809 ↗
33. Reexamination of photovoltaic hot spotting to show inadequacy of the bypass diode10.1109/JPHOTOV.2015.2444091 ↗
34. Output-power enhancement for hot spotted polycrystalline photovoltaic solar cells10.1109/TDMR.2017.2780224 ↗
35. An improved hot spot mitigation approach for photovoltaic modules under mismatch conditions10.1109/TIE.2023.3281684 ↗
36. Maximum power extraction in solar renewable power system – a bypass diode scanning approach10.1016/j.compeleceng.2018.02.034 ↗
37. A distributed approach to maximum power point tracking for photovoltaic submodule differential power processing10.1109/TPEL.2014.2330335 ↗
38. Enhanced solar PV power generation under PSCs using shade dispersion10.1109/TED.2020.3015171 ↗
39. Reduction of PV module temperature using thermally conductive backsheets10.1109/JPHOTOV.2018.2841511 ↗
40. Reliability and mission profiles of photovoltaic systems: a FIDES approach10.1109/TPEL.2014.2356434 ↗