journal article·2024-06

Highly efficient self-powered CH3NH3Pbl3 perovskite photodiode with double-sided poly(methyl methacrylate) passivation layers

Yushika Aggarwal, JaeWoo Park, Wonsun Kim, Shital Sharma, HyeRyun Jeong, Myeong Gyu Kim, Junyoung Kil, Eun Ha Choi, Byoungchoo Park

Publisher page

Abstract

Hybrid organohalide perovskites have recently attracted significant attention due to their outstanding photovoltaic (PV) conversion capabilities in optoelectronic devices. Herein, to develop a highly sensitive and self-powered perovskite-based PV photodiode (PVPD), we implement the selective use of poly(methyl methacrylate) (PMMA) as noise-current-reducing passivation layers on both the front and rear sides of a CH 3NH 3PbI 3 (MAPbI 3 ) perovskite light-absorbing layer. It is found that the PMMA layers effectively suppress carrier recombinations at the interfaces, resulting in fairly high power conversion efficiency of 17.6%. Additionally, the double-sided PMMA-passivated MAPbI 3 PVPD shows exceptional specific detectivity values (1.0 × 10 14 Jones from the dark current and 1.3 × 10 12 Jones from the noise current), significantly outperforming conventional MAPbI 3 PVPDs without passivation layers. The device also exhibits a very wide linear dynamic response range of ∼139 dB, with rapid rise and decay response times of 57 and 18 μs, respectively. The double-sided PMMA-passivated MAPbI 3 PVPD also is shown to be highly durable in terms of its dynamic responses even after a prolonged storage period of 1500 h. These results suggest that advanced interface engineering using double PMMA passivation layers holds great potential for developing high-performance self-powered perovskite photodetectors for a range of optoelectronic applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Solid-state spectroscopy and crystallography

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (85)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
3. Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells10.1038/ncomms8747 ↗
4. Efficient vacuum deposited p-i-n and n-i-p perovskite solar cells employing doped charge transport layers10.1039/C6EE02100J ↗
5. Perovskite-perovskite tandem photovoltaics with optimized band gaps10.1126/science.aaf9717 ↗
6. Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
7. Homogenizing out-of-plane cation composition in perovskite solar cells10.1038/s41586-023-06784-0 ↗
8. Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency10.1039/C5EE03874J ↗
9. Highly efficient planar perovskite solar cells achieved by simultaneous defect engineering and formation kinetic control10.1039/C8TA08819E ↗
10. Efficient and stable inverted perovskite solar cells with very high fill factors via incorporation of star-shaped polymer10.1126/sciadv.abg0633 ↗
11. A short review on interface engineering of perovskite solar cells: a self-assembled monolayer and its roles10.1002/solr.202070021 ↗
12. Molecular materials as interfacial layers and additives in perovskite solar cells10.1039/C9CS00733D ↗
13. Bi and Sn doping improved the structural, optical and photovoltaic properties of MAPbI3-based perovskite solar cells10.3390/ma15155216 ↗
14. Meniscus-assisted solution printing of large-grained perovskite films for high-efficiency solar cells10.1038/ncomms16045 ↗
15. Fully air-bladed high-efficiency perovskite photovoltaics10.1016/j.joule.2018.10.025 ↗
16. All-self-metered solution-coating process in ambient air for the fabrication of efficient, large-area, and semitransparent perovskite solar cells10.1039/D0SE00598C ↗
17. Solution-processed hybrid perovskite photodetectors with high detectivity10.1038/ncomms6404 ↗
18. Inhibition of ion migration for reliable operation of organolead halide perovskite-based metal/semiconductor/metal broadband photodetectors10.1002/adfm.201600405 ↗
19. Lead-halide perovskites for next-generation self-powered photodetectors: a comprehensive review10.1364/PRJ.418450 ↗
20. A self-powered, sub-nanosecond-response solution-processed hybrid perovskite photodetector for time-resolved photoluminescence-lifetime detection10.1002/adma.201603573 ↗
21. Resolving weak light of sub-picowatt per square centimeter by hybrid perovskite photodetectors enabled by noise reduction10.1002/adma.201500099 ↗
22. Recent advances on organic-inorganic hybrid perovskite photodetectors with fast response10.1002/inf2.12010 ↗
23. Highly efficient self-powered perovskite photodiode with an electron-blocking hole-transport NiOx layer10.1038/s41598-020-80640-3 ↗
24. High- detectivity polymer photodetectors with spectral response from 300 nm to 1450 nm10.1126/science.1176706 ↗
25. Self- formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells10.1038/nenergy.2016.81 ↗
26. Efficient luminescent solar cells based on tailored mixed-cation perovskites10.1126/sciadv.1501170 ↗
27. Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations10.1038/nenergy.2017.102 ↗
28. Defect and contact passivation for perovskite solar cells10.1002/adma.201900428 ↗
29. Molecular engineering of conjugated polymers for efficient hole transport and defect passivation in perovskite solar cells10.1016/j.nanoen.2017.12.028 ↗
30. Interfacial passivation and energy level alignment regulation for self-powered perovskite photodetectors with enhanced performance and stability
31. Stability of metal halide perovskite solar cells10.1002/aenm.201500963 ↗
32. A solution-processed transparent NiO hole-extraction layer for high-performance inverted perovskite solar cells10.1002/chem.201705658 ↗
33. PMMA passivated CsPbI2Br perovskite film for highly efficient and stable solar cells10.1016/j.jpcs.2021.110000 ↗
34. Effects of poly(methyl methacrylate) addition to perovskite photovoltaic devices10.1063/1.5089451 ↗
35. Roles of polymer layer in enhanced photovoltaic performance of perovskite solar cells via interface engineering10.1002/admi.201701256 ↗
36. A universal double-side passivation for high open-circuit voltage in perovskite solar cells: role of carbonyl groups in poly(methyl methacrylate)10.1002/aenm.201801208 ↗
37. Polymethyl methacrylate as an interlayer between the halide perovskite and copper phthalocyanine layers for stable and efficient perovskite solar cells
38. Composites of cross-linked perovskite/polymer with sodium borate for efficient and stable perovskite solar cells10.1039/D2TA02565E ↗
39. Highly efficient and stable perovskite solar cells by interfacial engineering using solution-processed polymer layer10.1021/acs.jpcc.6b12137 ↗
40. Highly efficient and stable perovskite solar cells via bilateral passivation layers10.1039/C9TA08084H ↗
41. Poly(4-Vinylpyridine)-Based interfacial passivation to enhance voltage and moisture stability of lead halide perovskite solar cells10.1002/cssc.201700271 ↗
42. Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 2110.1038/nenergy.2016.142 ↗
43. Multiscale morphology design of hybrid halide perovskites through a polymeric template10.1039/C5NR04715C ↗
44. Highly stable perovskite solar cells with an all-carbon hole transport layer10.1039/C6NR01152G ↗
45. Thin insulating tunneling contacts for efficient and water-resistant perovskite solar cells10.1002/adma.201600969 ↗
46. Self-powered CH3NH3PbI3 perovskite photodiode with a noise-suppressible passivation layer of poly(methyl methacrylate)10.1364/OE.479285 ↗
47. Highly efficient and stable self-powered perovskite photodiode by cathode-side interfacial passivation with poly(methyl methacrylate)10.3390/nano13030619 ↗
48. Hysteresis-free low-temperature-processed planar perovskite solar cells with 19.1% efficiency10.1039/C6EE01037G ↗
49. Role of BCP layer on nonlinear properties of perovskite solar cell10.1016/j.solener.2020.11.040 ↗
50. Newport, ORIEL PRODUCT TRAINING: Spectral Irradiance [Online]. Available: https://www.newport.com/medias/sys_master/images/images/hfb/hdf/8797196451870/LightSources.pdf (accessed February 24, 2024)..
51. Ammonium-iodide-salt additives induced photovoltaic performance enhancement in one-step solution process for perovskite solar cells10.1016/j.jallcom.2016.05.154 ↗
52. The mechanism of toluene- assisted crystallization of organic-inorganic perovskites for highly efficient solar cells10.1039/C6TA01087C ↗
53. Optical and structural characteristics of NiO thin films doped with AgNPs by sputtering method10.1007/s41403-017-0019-7 ↗
54. Effects of drying time on the formation of merged and soft MAPbI3 grains and their photovoltaic responses10.1039/D2NA00929C ↗
55. Trap density determination by space charge limited currents10.1063/1.1728818 ↗
56. A nanocomposite ultraviolet photodetector based on interfacial trap-controlled charge injection10.1038/nnano.2012.187 ↗
57. Thermal stability enhancement of perovskite MAPbI3 film at high temperature (150 °C) by PMMA encapsulation10.1007/s10854-021-06041-y ↗
58. Ultrathin polymethylmethacrylate interlayers boost performance of hybrid tin halide perovskite solar cells10.1039/D0CC07418G ↗
59. Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells10.1038/ncomms8747 ↗
60. Current density mismatch in perovskite solar cells10.1021/acsenergylett.0c01642 ↗
61. Revealing defective interfaces in perovskite solar cells from highly sensitive sub-bandgap photocurrent spectroscopy using optical cavities10.1038/s41467-021-27560-6 ↗
62. Charge carrier dynamics upon sub-bandgap excitation in methylammonium lead iodide thin films: effects of Urbach tail, deep defects, and two-photon absorption10.1021/acsenergylett.0c02067 ↗
63. Efficient perovskite solar cells by metal ion doping10.1039/C6EE01969B ↗
64. Temperature dependent behaviour of lead sulfide quantum dot solar cells and films10.1039/C6EE01577H ↗
65. Light intensity-dependent variation in defect contributions to charge transport and recombination in a planar MAPbI3 perovskite solar cell10.1038/s41598-019-56338-6 ↗
66. A self-powered and stable all-perovskite photodetector-solar cell nanosystem10.1002/adfm.201504477 ↗
67. Narrowband perovskite photodetector-based image array for potential application in artificial vision10.1021/acs.nanolett.8b03209 ↗
68. Environment-friendly antisolvent tert-amyl alcohol modified hybrid perovskite photodetector with high responsivity10.1364/PRJ.416580 ↗
69. A review on solution-processed perovskite/organic hybrid photodetectors10.1039/D1TC00643F ↗
70. Inhibition of buried cavities and defects in metal halide perovskite photodetectors via a two-step spin-coating method10.1039/D2TC01033J ↗
71. Ultrafast and broadband photodetectors based on a perovskite/organic bulk heterojunction for large-dynamic-range imaging10.1038/s41377-020-0264-5 ↗
72. Universal strategy for improving perovskite photodiode performance: interfacial built-in electric field manipulated by unintentional doping
73. Large grains and shallow defect states by early crystal growth suppression for high responsivity in perovskite photodetectors10.1021/acs.cgd.3c00745 ↗
74. High-performance self-powered perovskite photodetector based on cesium iodide doped spiro-OMeTAD hole transport material10.1016/j.jallcom.2022.164432 ↗
75. Loosening effect of perovskite intermolecular exchanger with strong steric hindrance for highly sensitive photodetector10.1016/j.apsusc.2022.153207 ↗
76. Single-pixel color imaging based on a high-performance MAPbI3 perovskite photodetector
77. Antisolvent-treated MAPbI3 and PbS quantum dots for high-performance broadband photodetectors10.1021/acsanm.2c04619 ↗
78. Quantification of ionic diffusion in lead halide perovskite single crystals10.1021/acsenergylett.8b00641 ↗
79. Impedance spectroscopy for metal halide perovskite single crystals: recent advances, challenges, and solutions10.1021/acsenergylett.1c01099 ↗
80. Determination of efective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗
81. On Mott-Schottky analysis interpretation of capacitance measurements in organometal perovskite solar cells10.1063/1.4966127 ↗
82. Trap states in multication mesoscopic perovskite solar cells: a deep levels transient spectroscopy investigation10.1063/1.5053845 ↗
83. Investigating the effect of non-ideal conditions on the performance of a planar CH3NH3PbI3-based perovskite solar cell through SCAPS-1D simulation10.1016/j.heliyon.2022.e11471 ↗
84. Extraction of saturation current and ideality factor from measuring VOC and ISC of photovoltaic modules10.1155/2017/8479487 ↗
85. Stable and sensitive tin-lead perovskite photodetectors enabled by azobenzene derivative for near-infrared acousto-optic conversion communications10.1016/j.nanoen.2021.106113 ↗