Effect of ultraviolet aging of backsheet on electrical performance of silicon photovoltaic module
Source abstract
Abstract
Photovoltaic (PV) backsheets protect solar cells from corrosion, moisture intrusion, and environmental pollution, and they also reflect light to be reabsorbed by solar cells. Previous studies have confirmed that PV backsheet materials can affect the performance of PV modules. In this study, the performance of the backsheet under a single ultraviolet (UV) aging condition and its influence on the electrical performance of the PV module were explored so as to establish the relationship between backsheet aging and PV module performance. The results of this study show that UV irradiation is the main factor leading to the aging and cracking of backsheets. When the backsheet was exposed to a UV dose of 60 kWh/m 2 , the elongation at break of the backsheet was reduced by 97.04%, the tensile strength was reduced by 60.10%, the reflectivity of the backsheet was reduced by 8.36%, and the power and short-circuit current of the PV module decreased by 3.69% and 3.96%, respectively. The primary cause for the decline in PV module power was determined to be the reduction in backsheet reflectivity, which diminished the available light that could undergo re-reflection onto the solar cell, thereby resulting in a reduction of the short-circuit current. These findings provide valuable insights into the changes in the physicochemical properties of UV-aged backsheets and their power decay mechanism in PV modules. The results establish an invaluable link between the testable characteristics of backsheet aging and PV module performance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photovoltaic System Optimization Techniques · Silicon and Solar Cell Technologies · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Photovoltaic module stability and reliability
2. Weathering and durability of PV backsheets and impact on PV module performance
3. Performance and degradation analysis for long term reliability of solar photovoltaic systems: a review10.1016/j.rser.2013.07.046 ↗
4. Review of degradation and failure phenomena in photovoltaic modules10.1016/j.rser.2022.112160 ↗
5. PV modules and their backsheets - a case study of a Multi-MW PV power station10.1016/j.solmat.2021.111295 ↗
6. Analysis of the degradation of encapsulant materials used in photovoltaic modules exposed to different climates in China10.1016/j.solener.2019.10.014 ↗
7. Performance analysis of field exposed single crystalline silicon modules10.1016/j.solmat.2010.03.035 ↗
8. Crystalline silicon PV module field failures
9. Degradation processes and mechanisms of backsheets
10. Study on the degradation of different types of backsheets used in PV module under accelerated conditions10.1016/j.solmat.2013.09.036 ↗
11. Environmental mechanisms of debonding in photovoltaic backsheets10.1016/j.solmat.2013.08.020 ↗
12. Five-year performance and reliability analysis of monocrystalline photovoltaic modules with different backsheet materials10.1016/j.solener.2018.06.110 ↗
13. Photovoltaic failure and degradation modes10.1002/pip.2866 ↗
14. Degradation analysis of field-exposed photovoltaic modules with non-fluoropolymer-based backsheets
15. Qualification testing of thin-film and crystalline photovoltaic modules10.1016/0927-0248(95)00118-2 ↗
16. Combined and sequential accelerated stress testing for derisking photovoltaic modules
17. Yu-tai sequential acceleration tests with pressure cooker test (PCT) and UV for backsheets of PV modules
18. Development of backsheet tests and measurements to improve correlation of accelerated exposures to fielded modules
19. Degradation and cracking behavior of polyamide-based backsheet subjected to sequential fragmentation test10.1109/JPHOTOV.2018.2863789 ↗
20. Failure modes evaluation of PV module via materials degradation approach10.1016/j.egypro.2013.05.066 ↗
21. Characterizing photovoltaic backsheet adhesion degradation using the wedge and single cantilever beam tests, Part II: accelerated tests10.1016/j.solmat.2020.110524 ↗
22. Aging behavior and degradation of different backsheets used in the field under various climates in China10.1016/j.solmat.2021.111023 ↗
23. Connecting material degradation and power loss of PV modules using advanced statistical methodology10.1016/j.solmat.2023.112485 ↗
24. Repair and preventive maintenance of photovoltaic modules with degrading backsheets using flowable silicone sealant10.1002/pip.3492 ↗
25. Repair options for PV modules with cracked backsheets10.1002/ese3.936 ↗
26. Analysis of power generation for solar photovoltaic module with various internal cell spacing10.3390/su13116364 ↗
27. Light collection from wide lambertian sources using angletransforming concentrators10.1016/0030-4018(89)90412-4 ↗
28. Hanjun Kang Reflection and durability study of different types of backsheets and their impact on c-Si PV module performance10.1016/j.solmat.2015.11.038 ↗
29. Effects of reflectance of backsheets and spacing between cells on photovoltaic modules10.3390/app12010443 ↗
30. Performance analysis of bifacial PV modules with transparent mesh backsheet10.3390/en14051399 ↗
31. Reliability assessment on PV backsheets with and without considering spectral UV albedo effects: a theoretical comparison10.1016/j.solmat.2021.111230 ↗
32. Cracking and delamination behaviors of photovoltaic backsheet after accelerated laboratory weathering
33. A novel test method for quantifying cracking propensity of photovoltaic backsheets after ultraviolet exposure10.1002/pip.3038 ↗
34. A study on spectral response and external quantum efficiency of mono-crystalline silicon solar cell
35. Ultra-violet degradation behavior of polymeric backsheets for photovoltaic modules10.1016/j.solener.2014.06.027 ↗
36. Effect of UV irradiation on PV modules and their simulation in newly designed site-specific accelerated ageing tests10.1016/j.solener.2023.02.042 ↗
37. Degradation analysis of crystalline silicon photovoltaic modules exposed over 30 years in hot-humid climate in China10.1016/j.solener.2018.05.027 ↗
38. FTIR study of ageing of γ-irradiated biopharmaceutical EVA based film10.1016/j.polymdegradstab.2016.03.040 ↗
39. Effect of barrier property of backsheet on degradation of crystalline silicon photovoltaic modules under combined acceleration test composed of UV irradiation and subsequent damp-heat stress10.7567/JJAP.57.127101 ↗
40. He Wang · 2016 · 1757
41. Enhancement of resistance against damp heat aging through compositional change in PV encapsulant poly (ethylene-co-vinyl acetate)10.1016/j.solener.2020.09.083 ↗
42. Dohyun Beak, Jaehyung lee, Junsin Yi, and Byoungdeog Choi, performance degradation of c-Si solar cells under UV exposure10.1166/jnn.2014.7887 ↗