Development and thermo-mechanical reliability assessment of fiber reinforced polymers in lightweight PV modules towards vehicle-integrated photovoltaics
Source abstract
Abstract
Weight reduction by omitting the use of bulky glass in c-Si photovoltaic (PV) modules is an important consideration of module development for vehicle-integrated photovoltaics (VIPV). Various approaches to achieve lightweight modules are proposed, yet there are many concerns regarding the reliability of such modules compared to standard glass-glass or glass-backsheet configurations. In this work, we investigate the thermomechanical behavior of LW modules with a multiwire design specifically aiming to VIPV applications. The developed modules consist of a commercially available carbon-fiber reinforced polypropylene backsheet and are compared to glass-fiber reinforced polypropylene backsheet modules. To enhance the thermo-mechanical reliability, polymer encapsulant and interconnection foil are substituted by glass-fiber reinforced composite encapsulant with the carbon-fiber reinforced polypropylene backsheet, thereby leading to similar to 2.9% fill factor (FF) decrease with a limited degradation after 200 thermal cycles. A failure mechanism analysis using electroluminescence and X-ray-based micro-tomography is carried out after thermal cycling tests, clearly demonstrating that thermal stresses introduce deformation of wire interconnects. A modified high-temperature thermal cycling test (-40 to 110 degrees C, 3.5 h) is implemented to observe the fast degradation of interconnects in compliance with VIPV conditions. The resulting fatigue stresses account for wire breakage in-between cells in the glass-fiber reinforced polypropylene module, while this effect is less pronounced in the carbon-fiber reinforced polypropylene backsheet module, indicating better thermo-mechanical reliability of the carbon-fiber reinforced polypropylene backsheet module. Herein, the current results could provide guidelines for lightweight PV module design (with a weight of 4.8 kg/m(2)) in the thermo-mechanical aspect. This research sheds light on the potential of lightweight modules specifically for VIPV applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Silicon and Solar Cell Technologies · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Electric vehicles: V2G for rapid, safe, and green EV penetration10.3390/en15030803 ↗
2. 2021
3. Yield potential of vehicle integrated photovoltaics on commercial trucks and vans
4. Facilitating vehicle-integrated photovoltaics by considering the radius of curvature of the roof surface for solar cell coverage
5. M. Yamaguchi et al., “Analysis for the potential of high-efficiency and low-cost vehicle-integrated photovoltaics,” Sol. RRL, vol. n/a, no. n/a, p. 2200556, doi: 10.1002/solr.202200556.10.1002/solr.202200556 ↗
6. Impact of climatic conditions on prospects for integrated photovoltaics in electric vehicles10.1016/j.rser.2022.112109 ↗
7. Environmental impacts of integrated photovoltaic modules in light utility electric vehicles10.3390/en13195120 ↗
8. State of the Art & Expected Benefits of PV-Powered Vehicles,” IEA-PVPS T17-01:2001. pp. 85-92 https://iea-pvps.org/key-topics/state-of-the-art-and-expected-benefits-of-pv-powered-vehicles/(accessed Jan. 29, 2023).
9. Demonstration of feeding vehicle-integrated photovoltaic-converted energy into the high-voltage on-board network of practical light commercial vehicles for range extension10.1002/solr.202100516 ↗
10. Light and durable: composite structures for building-integrated photovoltaic modules10.1002/pip.3009 ↗
11. Ultra-lightweight PV module design for building integrated photovoltaics
12. Robust glass-free lightweight photovoltaic modules with improved resistance to mechanical loads and impact10.1109/JPHOTOV.2018.2876934 ↗
13. Glass-free lightweight solar modules for integrated photovoltaics: the use of velcro as an alternative mounting system
14. Proposal for a safety qualification program for vehicle-integrated PV modules10.3390/su132313341 ↗
15. Secretariat · 2002
16. Future options for lightweight photovoltaic modules in electrical passenger cars10.3390/su13052532 ↗
17. 2 - advanced materials for automotive applications: an overview
18. The potential of glass-fibre-reinforcement: (Thermo-)Mechanical testing of light-weight PV modules
19. On the road towards vehicle integration: glass-fibre reinforced encapsulation enabling light-weight and curved modules
20. Development and testing of light-weight PV modules based on glass-fibre reinforcement10.1051/epjpv/2022007 ↗
21. Integrated lightweight, glass-free PV module technology for box bodies of commercial trucks
22. IEC 61215-2:2021 | IEC Webstore.” https://webstore.iec.ch/publication/61350 (accessed Jan. 29, 2023)..
23. A. J. Beinert, P. Romer, M. Heinrich, J. Aktaa, and H. Neuhaus, “Thermomechanical design rules for photovoltaic modules,” Prog. Photovoltaics Res. Appl., vol. n/a, no. n/a, doi: 10.1002/pip.3624.10.1002/pip.3624 ↗
24. Borgers · 2021 · vol. 10
25. Standard Test Method for Tensile Properties of Plastics.” https://www.astm.org/d0638-22.html (accessed Jan. 29, 2023)..
26. The beauty as well as the beast: towards appealing aesthetics and reliable photovoltaics for vehicle integration and beyond
27. Three-dimensional multi-ribbon interconnection for back-contact solar cells10.1002/pip.3390 ↗
28. Thermo-mechanical behavior assessment of smart wire connected and busbarPV modules during production, transportation, and subsequent field loading stages10.1016/j.energy.2018.12.002 ↗
29. A review of interconnection technologies for improved crystalline silicon solar cell photovoltaic module assembly10.1016/j.apenergy.2015.04.120 ↗
30. Modeling, imaging and resistance analysis for crystalline silicon photovoltaic modules failure on thermal cycle test10.1016/j.engfailanal.2020.104818 ↗
31. A comparison of degradation in three amorphous silicon PV module technologies10.1016/j.solmat.2009.12.009 ↗