Synthesis and photovoltaic properties of a low bandgap donor–acceptor alternating copolymer with benzothiadiazole unit
Source abstract
Abstract
Abstract A new donor–acceptor alternating copolymer as the donor material of the active layer in polymer solar cells has been synthesized. The alternating structure consisted of dithieno[3,2-b:2′,3′-d]thiophene (DTT) donor unit and 5,6-bis(tetradecyloxy)benzo-2,1,3-thiadiazole (BT) acceptor unit. Both units were confirmed by 1 H NMR and elemental analysis. Since the BT unit has long alkyoxyl side chains, the polymer was soluble in common organic solvents. Optoelectronic properties of the copolymer (PDTTBT) were investigated and observed by UV–vis, photoluminescence (PL) spectra, and cyclic voltammogram (CV). UV–vis spectrum exhibited a broad absorption band in the range of 300–750 nm and a low bandgap of 1.83 eV. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) levels of PDTTBT could be determined from the data of CV and UV–vis spectrum. Based on the ITO/PEDOT:PSS/PDTTBT:PCBM/Al device structure, the power conversion efficiency (PCE) under the illumination of AM 1.5 (100 mW/cm 2 ) was 0.113%. It was found that PCE of 0.301% could be acquired under the annealing condition at 150 °C for 30 min. In addition, solar cells fabricated with the 1,8-octanedithiol (OT) additive in the mixture solvent or adding TiO x optical spacer show efficiencies significantly improved over 15%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Low bandgap alternating polyfluorene copolymers in plastic photodiodes and solar cells10.1007/s00339-003-2498-5 ↗
2. Low-bandgap alternating fluorene copolymer/methanofullerene heterojunctions in efficient near-infrared polymer solar cells10.1002/adma.200600124 ↗
3. A new donor–acceptor–donor polyfluorene copolymer with balanced electron and hole mobility10.1002/adfm.200700441 ↗
4. A complete process for production of flexible large area polymer solar cells entirely using screen printing—first public demonstration10.1016/j.solmat.2008.12.001 ↗
5. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
6. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
7. High efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
8. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
9. A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene: fullerene solar cells10.1038/nmat1574 ↗
10. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkanedithiols10.1038/nmat1928 ↗
11. High-performance polymer heterojunction solar cells of a polysilafluorene derivative10.1063/1.2836266 ↗
12. A high-mobility electron-transport polymer with broad absorption and its use in field-effect transistors and all-polymer solar cells10.1021/ja071760d ↗
13. Synthesis and photovoltaic properties of diketopyrrolopyrrole-based donor−acceptor copolymers10.1021/cm901487f ↗
14. Synthesis, characterization, and photovoltaic properties of a low band gap polymer based on silole-containing polythiophenes and 2,1,3-benzothiadiazole10.1021/ja806687u ↗
15. Development of new semiconducting polymers for high performance solar cells10.1021/ja808373p ↗
16. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
17. Poly(thieno[3,4-b]thiophene). A new stable low band gap conducting polymer10.1021/ma0106245 ↗
18. Poly(thieno[3,4-b]thiophene): a p- and n-dopable polythiophene exhibiting high optical transparency in the semiconducting state10.1021/ma020367j ↗
19. Poly(thieno[3,4-b]thiophene)s from three symmetrical thieno[3,4-b]thiophene dimers10.1021/ma0526746 ↗
20. High-performance and stable organic thin-film transistors based on fused thiophenes10.1002/adfm.200500547 ↗
21. Organic thin-film transistors with high mobilities and low operating voltages based on 5.5′-bis-biphenyl-dithieno[3,2-b:2′,3′-d]thiophene semiconductor and polymer gate dielectric10.1063/1.2209213 ↗
22. High-performance thin-film transistors from solution-processed dithienothiophene polymer semiconductor nanoparticles10.1021/cm703567g ↗
23. Novel copolymers incorporating dithieno[3,2-b:2′,3′-d]thiophene moieties for air-stable and high performance organic field-effect transistors10.1039/b801603h ↗
24. Dithienothiophene based polymer as electron donor in plastic solar cells10.1016/j.tsf.2007.12.077 ↗
25. Low bandgap π-conjugated copolymers based on fused thiophenes and benzothiadiazole: synthesis and structure–property relationship study10.1002/pola.23601 ↗
26. Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices10.1021/ar900061z ↗
27. Photovoltaic performance and morphology of polyfluorene blends: a combined microscopic and photovoltaic investigation10.1021/ma010240e ↗
28. The origin of collected charge and open-circuit voltage in blended polyfluorene photovoltaic devices10.1002/adma.200305766 ↗
29. High-performance polymer solar cell of an alternating polyfluorene copolymer and a fullerene derivative10.1002/adma.200304150 ↗
30. A new poly(2,7-dibenzosilole) derivative in polymer solar cells10.1002/marc.200700470 ↗
31. A low-bandgap poly(2,7-carbazole) derivative for use in high-performance solar cells10.1002/adma.200602496 ↗
32. Two novel cyclopentadithiophene-based alternating copolymers as potential donor components for high-efficiency bulk-heterojunction-type solar cells10.1021/cm8006638 ↗
33. Low band gap polymers for roll-to-roll coated polymer solar cells10.1021/ma1015903 ↗
34. Low band gap polymers for roll-to-roll coated organic photovoltaics–design, synthesis and characterization10.1515/green.2011.005 ↗
35. A convenient and improved synthesis of dithieno[3,2-b:2′,3′-d]thiophene10.1016/S0040-4039(02)00006-0 ↗
36. Fluorescent conjugated polymers that incorporate substituted 2,1,3-benzooxadiazole and 2,1,3-benzothiadiazole units10.1021/ma8010679 ↗
37. Tauc · 1974
38. Synthesis of new conjugated thiophene polymers10.1016/0379-6779(95)03445-P ↗
39. Energy level and molecular structure engineering of conjugated donor–acceptor copolymers for photovoltaic applications10.1021/ma900623p ↗
40. Low bandgap polymers for photon harvesting in bulk heterojunction solar cells10.1039/b306630d ↗
41. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
42. Synthesis of conjugated polymers for Organic solar cell applications10.1021/cr900182s ↗
43. Effects of solvent mixtures on the nanoscale phase separation in polymer solar cells10.1002/adfm.200701459 ↗
44. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
45. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer10.1002/adma.200501825 ↗