Research on the reliability of wire web in diamond multi-wire saw slicing photovoltaic monocrystalline silicon wafer
Source abstract
Abstract
Diamond multi-wire slicing technology is the main method for producing the solar cell substrate based on monocrystalline silicon. To reduce the production cost and increase the production efficiency during the sawing process, the diameter of the diamond saw wire is becoming thinner, and the sawing speed is getting faster, which leads to an increasingly prominent problem of saw wire breakage during the slicing process. To understand the breaking characteristics of diamond saw wire and evaluate the reliability of the saw wire during the sawing process, the tensile testing of saw wires was carried out in this paper. And based on the Weibull function, the breaking force was analyzed statistically. A maximum tension force model for the saw wire during the sawing process was established. And based on the maximum tension force model and Weibull reliability function, the influence of various process parameters on the reliability of the wire web was analyzed. The results indicated that as the usage time of the saw wire increases, the breaking force gradually decreases and stabilizes. Compared to the fresh saw wire, the reliability of the used saw wires is significantly reduced. As the abrasive distribution density and the wire speed increases, the reliability of the wire web gradually increases. Conversely, as the feed speed and the pretension of the saw wire increase, the reliability of the wire web gradually decrease. The results of this paper provide a theoretical approach for assessing the reliability of diamond saw wire web during the sawing process. It also provides guidance for optimizing process parameters to enhance the reliability of the wire web.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Integrated Circuits and Semiconductor Failure Analysis · Advanced Surface Polishing Techniques · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Developing characteristic performance maps of silicon-based solar cells for efficient energy management applications
2. Experimental study on slicing photovoltaic polycrystalline silicon with diamond wire saw10.1016/j.mssp.2019.104779 ↗
3. Optical management of spacer layer of high-performance four-terminal perovskite/silicon tandem solar cells10.1016/j.solener.2021.09.018 ↗
4. Study on a novel fixed and free abrasive combined wire sawing multi-crystalline silicon wafers for wet acid texturization10.1016/j.solener.2021.03.080 ↗
5. Fracture probability of PV mono-Si wafers in diamond wire slicing due to coupling of capillary adhesion bending stress and sawing stress
6. Modeling and experimental investigation of monocrystalline silicon wafer cut by diamond wire saw10.1016/j.engfracmech.2022.109029 ↗
7. Effect of the diamond saw wires capillary adhesion on the thickness variation of ultra-thin photovoltaic silicon wafers during slicing10.1016/j.solmat.2023.112525 ↗
8. Action mechanism of liquid bridge between electroplated diamond wires for ultrathin wafer slicing10.1016/j.solener.2021.11.069 ↗
9. A critical review on the fracture of ultra-thin photovoltaics silicon wafers10.1016/j.solmat.2024.112999 ↗
10. Measurement and simulation calculation of wire bow angle during the diamond wire saw process10.1007/s00170-022-09233-w ↗
11. Fixed abrasive diamond wire machining-Part I: process monitoring and wire tension force10.1016/S0890-6955(02)00215-8 ↗
12. Test research on wire deflection detection of a diamond wire saw10.1007/s00170-016-9787-6 ↗
13. A new method of determining the slicing parameters for fixed diamond wire saw10.1016/j.mssp.2020.105252 ↗
14. A macroscopic mechanical model of the wire sawing process10.1016/j.ijmachtools.2011.05.005 ↗
15. Experimental and simulational investigation of wire bow deflection in single wire saw10.1007/s00170-018-2919-4 ↗
16. Formation mechanism of wire bow and its influence on diamond wire saw process and wire cutting capability10.1016/j.ijmecsci.2020.105851 ↗
17. Surface formation, morphology, integrity and wire marks in diamond wire slicing of mono-crystalline silicon in the photovoltaic industry
18. Investigating bowing of hot wire during cutting of EPS10.1016/j.promfg.2018.07.078 ↗
19. Experimental study on surface topography and fracture strength of worn saw wire in multi-wire sawing10.1007/s00170-017-0854-4 ↗
20. Research on wire net reliability assessing method in multi-wire sawing10.3901/JME.2017.23.174 ↗
21. Slicing parameter optimization based on wire net dynamic reliability constraint in multi-wire saw10.1016/j.mssp.2021.106144 ↗
22. Experimental investigation on diamond wire sawing of Si3N4 ceramics considering the evolution of wire cutting performance10.1016/j.ceramint.2022.02.296 ↗
23. Sawing characteristics of diamond wire cutting sapphire crystal based on tool life cycle10.1016/j.ceramint.2021.06.070 ↗
24. Effect of initial deflection of diamond wire on thickness variation of sapphire wafer in multi-wire saw
25. Fracture strength analysis of large-size and thin photovoltaic monocrystalline silicon wafers10.1016/j.engfracmech.2024.110523 ↗
26. Research on fracture failure mechanism of endless diamond wire saw
27. Liu · 2018
28. Failure modes of brazed diamond wire saw
29. A statistical theory of the strength of materials
30. A statistical distribution function of wide applicability10.1115/1.4010337 ↗
31. A modified Weibull distribution10.1109/TR.2002.805788 ↗
32. On weakest link theory and Weibull statistics10.1111/jace.14665 ↗
33. Statistical properties of Weibull estimators10.1007/BF02402669 ↗
34. On the estimation of the Weibull modulus10.1007/BF00719924 ↗
35. On estimating the Weibull modulus for a brittle material10.1007/BF00561290 ↗
36. On the estimation of percentiles of the Weibull distribution10.1023/A:1006635810580 ↗
37. A new probability index for estimating Weibull modulus for ceramics with the least-square method10.1023/A:1006712809728 ↗
38. Kapur · 1977
39. Wire bow analysis based on process parameters in diamond wire sawing10.1007/s00170-023-12659-5 ↗
40. A macroscopic mechanical model of the wire sawing process10.1016/j.ijmachtools.2011.05.005 ↗
41. Ti-coated diamond micro-powder for the manufacture of the electroplated diamond wire saw10.1016/j.diamond.2024.111273 ↗
42. Generation of diamond wire sliced wafer surface based on the distribution of diamond grits10.1007/s12541-014-0401-2 ↗
43. Finite element analysis on processing stress of polysilicon cut by diamond multi-wire saw10.1016/j.mssp.2021.105860 ↗
44. Fixed-diamond abrasive wire-saw cutting force modeling based on changes in contact arc lengths10.3390/mi14061275 ↗