Interfacial defect passivation by multiple-effect molecule for efficient and stable perovskite solar cells
Source abstract
Abstract
Perovskite solar cells (PSCs) are widely studied as the most promising photovoltaic device, which have attracted vast interest in recent years due to their excellent power conversion efficiency (PCE) and low cost. Although the PSC have reached a PCE over 25%, the interface between the perovskite and hole transport layer (HTL) still is a crucial factor limiting higher PCE and long-term stability. In this work, we choose an organic molecule Bis(trifluoromethyl)benzo amide (6FBZm) to passivate defects at the perovskite/HTL interface. Owing to a strong interaction with uncoordinated Pb2+, the 6FBZm effectively passivated the surface defects, remarkably promoted carrier transportation. As a result, the perovskite device based on 6FBZm surface modification showed a PCE increase of 16.4% over the control device. Especially, the fill factor (FF) and the open-circuit voltage (VOC) of the modified device increased significantly. In addition, the unencapsulated 6FBZm-modified device maintains better PCE compared to the control device after aging for over 600 h in ambient air with extreme humidity and temperature conditions. Results suggested that the introduction of 6FBZm is a promising strategy to modify the surface of perovskite film aiming at highly efficient and stable perovskite solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Defect passivation in lead‐halide perovskite nanocrystals and thin films: toward efficient LEDs and solar cells10.1002/ange.202102360 ↗
2. Achieving a high-performance, self-powered, broadband perovskite photodetector employing MAPbI3 microcrystal films10.1039/C9TC05668H ↗
3. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
4. Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss10.1126/science.abb7167 ↗
5. Materials and methods for interface engineering toward stable and efficient perovskite solar cells10.1021/acsenergylett.0c01240 ↗
6. 22.8%-Efficient single-crystal mixed-cation inverted perovskite solar cells with a near-optimal bandgap10.1039/D0EE03839C ↗
7. Conformal quantum dot–SnO2 layers as electron transporters for efficient perovskite solar cells10.1126/science.abh1885 ↗
8. On-device lead sequestration for perovskite solar cells10.1038/s41586-020-2001-x ↗
9. Vapor-assisted deposition of highly efficient, stable blackcap FAPbI3 perovskite solar cells10.1126/science.abb8985 ↗
10. Stable high‐performance perovskite solar cells via grain boundary passivation10.1002/adma.201706576 ↗
11. Perovskite ink with wide processing window for scalable high-efficiency solar cells10.1038/nenergy.2017.38 ↗
12. Multifunctional polymer‐regulated SnO2 nanocrystals enhance interface contact for efficient and stable planar perovskite solar cells10.1002/adma.202003990 ↗
13. Reduction of lead leakage from damaged lead halide perovskite solar modules using self-healing polymer-based encapsulation10.1038/s41560-019-0406-2 ↗
14. Grain boundary dominated ion migration in polycrystalline organic–inorganic halide perovskite films10.1039/C6EE00413J ↗
15. A review of perovskites solar cell stability
16. Multiple-defect management for efficient perovskite photovoltaics10.1021/acsenergylett.1c01039 ↗
17. A bilayer conducting polymer structure for planar perovskite solar cells with over 1,400 hours operational stability at elevated temperatures10.1038/s41560-021-00953-z ↗
18. High‐efficiency tin halide perovskite solar cells: the chemistry of tin (II) compounds and their interaction with Lewis base additives during perovskite film formation10.1002/solr.202000606 ↗
19. Propylammonium-assisted reduction of the open-circuit voltage deficit in wide-bandgap perovskite solar cells: the role of suppressed ion migration10.1021/acsenergylett.0c01350 ↗
20. Application of perovskite quantum dots as an absorber in perovskite solar cells10.1002/anie.202112412 ↗
21. Surface passivation using pyridinium iodide for highly efficient planar perovskite solar cells10.1016/j.jechem.2020.04.049 ↗
22. Recent progresses on defect passivation toward efficient perovskite solar cells10.1002/aenm.201902650 ↗
23. Buried interface modification in perovskite solar cells: a materials perspective10.1002/aenm.202104030 ↗
24. Lewis acid–base adduct approach for high efficiency perovskite solar cells10.1021/acs.accounts.5b00440 ↗
25. Effect of growth temperature on the characteristics of CsPbI3-quantum dots doped perovskite film10.3390/molecules26154439 ↗
26. Surface passivation using 2D perovskites toward efficient and stable perovskite solar cells
27. Modulating chemical interaction to realize bottom‐up defect passivation for efficient and stable perovskite solar cells10.1002/solr.202200512 ↗
28. 2-CF3-PEAI to eliminate Pb0 traps and form a 2D perovskite layer to enhance the performance and stability of perovskite solar cells10.1016/j.nanoen.2022.107036 ↗
29. Bi (trifluoromethyl) benzoic acid-assisted shallow defect passivation for perovskite solar cells with an efficiency exceeding 2110.1021/acsami.1c18035 ↗
30. Surface passivation with a fluorocarbon-based pyridine derivative for high-crystallinity perovskite solar cells with efficiency over 20% and good humidity stability10.1021/acsaem.1c01295 ↗
31. Enhanced stability and photovoltaic performance of planar perovskite solar cells through anilinium aminobenzoate interfacial engineering10.1016/j.jpowsour.2020.228811 ↗
32. Rational design of Lewis base molecules for stable and efficient inverted perovskite solar cells10.1126/science.ade3970 ↗
33. Surface passivation of perovskite film for efficient solar cells10.1038/s41566-019-0398-2 ↗
34. Tailored amphiphilic molecular mitigators for stable perovskite solar cells with 23.5% efficiency10.1002/adma.201907757 ↗
35. Plant‐derived l‐theanine for ultraviolet/ozone resistant perovskite photovoltaics
36. Peptide‐passivated lead halide perovskite nanocrystals based on synergistic effect between amino and carboxylic functional groups
37. Collaborative strategy of multifunctional groups in trifluoroacetamide achieving efficient and stable perovskite solar cells10.1002/solr.202200284 ↗
38. Lewis acid-base adduct approach for high efficiency perovskite solar cells10.1021/acs.accounts.5b00440 ↗
39. Realizing high‐efficiency perovskite solar cells by passivating triple‐cation perovskite films10.1002/solr.202200115 ↗
40. Regulating surface termination for efficient inverted perovskite solar cells with greater than 23% efficiency10.1021/jacs.0c09845 ↗
41. Efficient and stable 2D@ 3D/2D perovskite solar cells based on dual optimization of grain boundary and interface10.1021/acsenergylett.1c01649 ↗
42. Enhancing the stability of planar perovskite solar cells by green and inexpensive cellulose acetate butyrate10.1016/j.jechem.2022.09.039 ↗
43. Deep‐level transient spectroscopy for effective passivator selection in perovskite solar cells to attain high efficiency over 2310.1002/cssc.202100980 ↗
44. R. Xia, Y. Xu, B. Chen, H. Kanda, M. Franckeviius, R. Gegeviius, S. Wang, Y. Chen, D. Chen, J.N. Ding, Interfacial Passivation of Wide-bandgap Perovskite Solar Cells and Tandem Solar Cells, J. Mater. Chem. A, https://doi.org/10.1039/d1ta04330g.10.1039/D1TA04330G ↗
45. Efficient and stable carbon‐based CsPbIBr2 perovskite solar cells by 4‐aminomethyltetrahydropyran acetate modification
46. Promoting perovskite crystal growth to achieve highly efficient and stable solar cells by introducing acetamide as an additive10.1039/C8TA02121J ↗
47. Improved carrier management via a multifunctional modifier for high‐quality low‐bandgap Sn‐Pb perovskites and efficient all‐perovskite tandem solar cells
48. Impacts of alkaline on the defects property and crystallization kinetics in perovskite solar cells10.1038/s41467-019-09093-1 ↗
49. X. Jiang, B. Zhang, G. Yang, Z. Zhou, X. Guo, F. Zhang, S. Yu, S. Liu, S. Pang, Molecular Dipole Engineering of Carbonyl Additives for Efficient and Stable Perovskite Solar Cells, Angew. Chem. Int. Ed. e202302462, https://doi.org/10.1002/anie.202302462.10.1002/anie.202302462 ↗