journal article·2023-10

Effect of the diamond saw wires capillary adhesion on the thickness variation of ultra-thin photovoltaic silicon wafers during slicing

Dameng Cheng, Yufei Gao

Publisher page

Abstract

In order to improve the performance of solar cells and reduce their manufacturing costs, monocrystalline silicon wafers used for manufacturing solar cells are developing towards larger sizes and ultra-thin thickness, and the diameter of diamond saw wires used to cut silicon wafers is also continuously decreasing. These aspects cause uneven thickness and lager thickness variation (TV) of the as-cut wafer during slicing process. The reason of uneven thickness was analyzed from the point of liquid bridge with capillary force between the saw wires in this paper. The mechanical equilibrium equation between the liquid bridge and the saw wires was established based on the Young-Laplace equation, and the theoretical model of the as-cut wafer thickness was derived during the sawing process. The effect of the saw wire tensioning force, span, the diameter of the core wire and the wetting angle of coolant on the as-cut wafer thickness variation was analyzed based on the model. The results show that the increase in the saw wire tensioning force, the core wire diameter and the wetting angle of coolant improved the thickness accuracy and reduced the thickness variation of the as-cut wafer. And the increase in the saw wire span reduced the thickness accuracy and increased the thickness variation. The research results of this paper provide the mechanism analysis for the thickness variation of the ultra-thin wafer during the slicing process. It is of great significance to produce the ultra-thin photovoltaic silicon wafers with the fine saw wire in the future.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Surface Modification and Superhydrophobicity · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Surface formation, morphology, integrity and wire marks in diamond wire slicing of mono-crystalline silicon in the photovoltaic industry
2. Research on the capillary penetration mechanism of cutting fluid supplied by electrostatic spraying in diamond wire sawing10.1016/j.jmapro.2021.08.004 ↗
3. Study on a novel fixed and free abrasive combined wire sawing multi-crystalline silicon wafers for wet acid texturization10.1016/j.solener.2021.03.080 ↗
4. Experiment and theoretical prediction for subsurface microcracks and damage depth of multi-crystalline silicon wafer in diamond wire sawing10.1016/j.engfracmech.2022.108391 ↗
5. Effect of capillary adhesion on fracture of photovoltaic silicon wafers during diamond wire slicing10.1016/j.solener.2022.04.029 ↗
6. Mechanical strength problem of thin silicon wafers (120 and 140 μm) cut with thinner diamond wire (Si kerf 120 → 100 μm) for photovoltaic use10.1016/j.mssp.2020.105209 ↗
7. Finite element analysis on processing stress of polysilicon cut by diamond multi-wire saw10.1016/j.mssp.2021.105860 ↗
8. Elastocapillarity: when surface tension deforms elastic solids10.1146/annurev-fluid-122316-050130 ↗
9. Capillary forces as a limiting factor for sawing of ultrathin silicon wafers by diamond multi-wire saw
10. Capillary bridges between soft substrates10.1103/PhysRevLett.112.066102 ↗
11. Adhesion: elastocapillary coalescence in wet hair10.1038/432690a ↗
12. Three-dimensional lithography by elasto-capillary engineering of filamentary materials10.1557/mrs.2016.4 ↗
13. Comparative analysis of mechanical strength of diamond-sawn silicon wafers depending on saw mark orientation, crystalline nature and thickness10.1016/j.solmat.2019.110068 ↗
14. Carton · 2020
15. Challenges associated with diamond wire sawing when generating reduced thickness mono-crystalline silicon wafers
16. Transverse forced vibration of a diamond wire under support excitations10.1016/j.ijmecsci.2022.107786 ↗
17. Action mechanism of liquid bridge between electroplated diamond wires for ultrathin wafer slicing10.1016/j.solener.2021.11.069 ↗
18. Li · 2008
19. Capillary phenomena in assemblies of parallel cylinders: Ⅰ. Capillary rise between two cylinders10.1016/0021-9797(69)90379-8 ↗
20. Capillary phenomena in assemblies of parallel cylinders: II. Capillary rise in systems with more than two cylinders10.1016/0021-9797(69)90403-2 ↗
21. Capillary phenomena in assemblies of parallel cylinders: III. Liquid columns between horizontal parallel cylinders10.1016/0021-9797(70)90167-0 ↗
22. Surface and contact forces models within the framework of micro-assembly10.1163/156856306777544970 ↗
23. Analytical prediction of subsurface microcrack damage depth in diamond wire sawing silicon crystal10.1016/j.mssp.2020.105015 ↗
24. Subsurface crack damage in silicon wafers induced by resin bonded diamond wire sawing10.1016/j.mssp.2016.10.021 ↗
25. Investigation on the stiffness of wire web of multi-wire sawing machine and its influence on machining accuracy10.1007/s00170-021-07788-8 ↗
26. Formation mechanism of wire bow and its influence on diamond wire saw process and wire cutting capability10.1016/j.ijmecsci.2020.105851 ↗
27. A method for calculating melt wetting angle based on image processing
28. Zheng · 2020
29. Development of fixed grain micro-saw wire and cutting performance10.1016/j.promfg.2017.09.027 ↗